This bundle is comprised of the following products: 125634 1x Norco SS-500 5-Bay SATA/SAS Hot Swap Rack Module
Convert 3x5.25" Drive Bays to 5x Hot Swap 3.5" SATA/SAS HDD Bays 92528 5x Western Digital 1000GB (1TB) IntelliPower Serial ATA-II-300 HDD w. 32MB Cache (WD10EADS) Caviar Green 127517 1x Addonics 5-Port Hardware Port Multiplier - Turn 1xeSATA into 5xSATA-II, RAID 5 - Enclosure Version
 |
Norco SS-500 5-Bay SATA/SAS Hot Swap Rack Module
Convert 3x5.25" Drive Bays to 5x Hot Swap 3.5" SATA/SAS HDD Bays |
back to list |
|
| Features:
5 Bay SATA(I or II)/SAS Hot Swap Module
Steel material, RoHS compliance;
Electromagnetism shield design
Support two 4pin power connectors
Ball bearing fan with air duct
Patent balance handle -- No skew in/out
LED indicators (for Power, Fan alarm & Reset)
Support hot swap
Support all operating systems
Supports RAID 0, 1, 5 functions (RAID card required)
Specifications:
Drive Bay:Turn 3 x 5.25" drive bay to 5 x 3.25" hot swappable hard drive bay
Interface: SATA to SATA; SAS to SAS
Fan Sensor: Fan failure sensor
Alarm: Overheating alarm
Cooling System:One 92mm ball bearing fan with air duct provide excellent cooling air flow
LEDs:P/S,HDD access,Fan Sensor,Buzzer
RAID:Supports RAID 0, 1, 5 functions (RAID card required)
Power Connector: 4 pin molex power connector x 2
Data Connector: SATA (I or II)/SAS data port x 5
Dimensions(L x W x H):9 x 5.75 x 5 inch
Weight: 4 lbs
| |
 |
Western Digital 1000GB (1TB) IntelliPower Serial ATA-II-300 HDD w. 32MB Cache (WD10EADS) Caviar Green |
back to list |
|
As hard drive capacities increase, the power required to run those drives increases as well. WD Caviar Green drives make it possible for energy-conscious customers to build systems with higher capacities and the right balance of system performance, ensured reliability, and energy conservation.
Key Features
Reduced power consumption - WD has reduced power consumption by up to 40 percent compared to standard desktop drives with the combination of WD's IntelliSeek, NoTouch, and IntelliPower technologies.
Helps enable eco-friendly PCs - WD Caviar Green drives yield an average drive power savings of 4-5 watts over standard desktop drives making it possible for our energy-conscious customers to build systems with higher capacities and the right balance of system performance, ensured reliability, and energy conservation. This power savings equates to reducing CO2 emission by up to 13.8 kilograms per drive per year - the equivalent of taking a car off the road for 3 days each year*. By using environmentally-conscious PCs with our WD Caviar Green drives on board, large organizations with many desktop computers can minimize their carbon footprint and save real money on electricity costs.
*Assumes that a car produces 1.60 CO2 pounds per Kwatt/hours/year. Calculation of automobile emissions depends on the car's g/km emission levels and km/year of driving.
Cool and quiet - GreenPower technology yields lower operating temperatures for increased reliability and low acoustics for ultra-quiet PCs and external drives.
Perfect for external drives - External drive manufacturers can eliminate the need for a fan in a high-capacity product with a WD Caviar Green drive, the coolest and quietest in its class.
IntelliPower - A fine-tuned balance of spin speed, transfer rate and caching algorithms designed to deliver both significant power savings and solid performance.
IntelliSeek - Calculates optimum seek speeds to lower power consumption, noise, and vibration. View demo >
NoTouch ramp load technology -  The recording head never touches the disk media ensuring significantly less wear to the recording head and media as well as better drive protection in transit.
Perpendicular Magnetic Recording (PMR) - Employs PMR technology to achieve even greater areal density.
Low power spin-up - WD Caviar Green drives consume less current during startup allowing lower peak loads.
Advanced power technology - Electronic components deliver best-in-class low power consumption for reduced power requirements and increased reliability.
|
Ideal For
Environmentally friendly PCs and external storage requiring lower power consumption and cool, quiet operation.
|
 |
| Performance Specifications |
| Transfer Rates |
 |
Buffer To Host (Serial ATA) |
3 Gb/s (Max) |
|
|
| Physical Specifications |
|
Formatted Capacity |
1,000,204 MB |
|
Capacity |
1 TB |
|
Interface |
SATA 3 Gb/s |
|
User Sectors Per Drive |
1,953,525,168 |
|
|
| Physical Dimensions |
| English |
|
Height |
1.028 Inches (Max) |
|
Length |
5.787 Inches (Max) |
|
Width |
4.00 Inches (+/- 0.010 inch) |
|
Weight |
1.39 Pounds |
|
| Metric |
|
Height |
26.1 mm (Max) |
|
Length |
147 mm (Max) |
|
Width |
101.6 mm |
|
Weight |
0.63 kg |
|
|
| Environmental Specifications |
| Shock |
|
Operating Shock (Read) |
65G, 2 ms |
|
Non-operating Shock |
250G, 2 ms |
|
| Acoustics |
|
Idle Mode |
25 dBA (average) |
|
Seek Mode 0 |
27 dBA (average) |
|
Seek Mode 3 |
25 dBA (average) |
|
| Vibration |
|
Operating |
|
Linear |
20-300 Hz, .75G (0 to peak) |
|
Random |
10-300 Hz, 0.008 g / Hz |
|
|
Non-operating |
|
Low Frequency |
5-20 Hz, 0.195 inches (double amplitude) |
|
High Frequency |
20-500 Hz, 4.0G (0 to peak) |
|
|
| Electrical Specifications |
| Current Requirements |
|
Power Dissipation |
|
Read/Write |
5.4 Watts |
|
Idle |
2.8 Watts |
|
Standby |
0.40 Watts |
|
Sleep |
0.40 Watts |
|
| As used for storage capacity, one megabyte (MB) = one million bytes, one gigabyte (GB) = one billion bytes, and one terabyte (TB) = one trillion bytes. Total accessible capacity varies depending on operating environment. As used for buffer or cache, one megabyte (MB) = 1,048,576 bytes. As used for transfer rate or interface, megabyte per second (MB/s) = one million bytes per second, and gigabit per second (Gb/s) = one billion bits per second. |
| |
 |
Addonics 5-Port Hardware Port Multiplier - Turn 1xeSATA into 5xSATA-II, RAID 5 - Enclosure Version |
back to list |
|
|
***Please Note: It is required that the Unit be connected to a Port Multiplier compatible eSATA Host Controller for the System to see all drives. It is assumed that the driver for the eSATA Host Cotroller is correctly installed.***
5 Port HPM-XA Enclosure Version
Package content: 5 Port HPM-XA on SCSI-I (Centronics 50-pin) bracket, Y power cable, Driver CD with configuration and monitor software utility, User Guide
This new 5-Port HPM XA is a feature rich Hardware Port Multiplier that enables connecting up to 5 SATA drives to any SATA port. It is a perfect solution for attaching large quantity of hard drives as individual drive or as a RAID volume with redundancy to a Desktop or Server. This HPM can also be used to connect 5 SATA optical drives such as DVD-RRW or Blu-Ray drives to do simultaneous data copying. Configuration can be set via a set of onboard jumpers or the bundled software utility under Windows OS. Drive and the HPM status can be visually monitored by attaching LEDs to the onboard LED signal pin headers or via the bundled monitoring software. Any drive failure or RAID error can be notified via audible alert from the on board buzzer and email to an SMTP account.
The 5-Port HPM XA comes in choice with the system version or the enclosure version. The system version enables multiple hard drives inside a system to be connected together to form a RAID volume or use as individual drives. The enclosure version fits perfectly into the Addonics family of Storage Tower, Storage Rack and many standard multi-bay enclosures with standard SCSI-1 connector cut out. The 5 hard drives inside the drive enclosure, once configurated, can be attached to any computer via high speed eSATA connection or USB 2.0 by attaching the optional Addonics eSATA - USB adapter.
Product Features
- Connect up to 5 SATA hard drives to computer via any SATA port*
- RAID configuration is programmed using onboard jumpers for simple deployment. View detailed jumper configuration diagram
- Integrated hardware RAID controller to maximize performance
- Software included for RAID management and advanced RAID configuration
- Compatible with Compact Flash or Micro Drive using Addonics SATA CF adapters (ADSAHDCF or ADSACF)
- Compatible with SATA optical drives - support simultaneous DVD writing*
- RAID volume can be used as a boot drive or as additional storage
- Multiple units can be daisy chained
- System version mounts in any standard height or low profile PCI slot
- Enclosure version designed to fit Addonics Storage Tower, Mini Storage Tower, Storage Rack or multi-bay drive enclosure with SCSI-1 (Centronic 50-pin) back panel
- Supports RAID0 (Striping), RAID1 (Mirroring), RAID3, RAID5 (Parity), RAID10 (Mirrored Striped), JBOD (Concatenation), Clone Mode (N-Way Mirror) using built-in hardware RAID.
- Supports individual drive mode*
- Clone mode - clone's action is similar to RAID 1, except all the hard drives connected will be mirrored. Clone mode is especially useful when users would like to copy data form a hard drive to several hard drives at the same time.
- Supports hot swap when attached to controllers that support this feature.
- Drive activity LED and Error LED for Host and 5 SATA devices
- OS Support: Windows 2000, XP, 2003, Vista, Mac OS X and above, Linux kernel 2.6 and above
* Independent drive configuration and optical drive are supported only when connecting to controllers with Silicon Image Sil3124, Sil3132 chip set or controllers that are PM compatible. Simultaneous DVD writing was tested using the Nero Burning Rom
Specifications
- 5 internal SATA ports for SATA / SATAII storage devices
- Drive activity LED and Error LED for Host and 5 SATA devices
- Auto-negotiation support for 1.5Gbps and 3.0Gbps SATA
- Compliant with SATA I/II specification
- Support SATA optical devices
- Chipset : JMicron JMB393
- Support 48-bit LBA addressing
- Supports Hot-swapping
- Supports NCQ (Native Command Queuing)
- OS support: Windows 2000, XP, 2003, Vista, Mac OS X and above, Linux kernel 2.4 and above, Mac OS X 10.4.x
- Dimensions: (W x D x H) - 3.4 x 2.2 x .9 in. (85mm x 55mm x 23mm)
- Weight: 48g
- Operating temperature range: 0 C to +70 C
- Operating humidity range: 5% to 90%
- Storage temperature range: -40 C to +85 C
- Storage humidity range: 5% - 95% (non condensing)
- 1 year warranty
|
|
Home
Computers
Networking
Printers
Phones
POS
Media
Wishlist
Email
Your Account
Cart
Order Status
Checkout
Express Checkout
Login
Click here to login
Click here to register
