IMG 1 of 1
No Longer Available

Part Number:
136794
(?) Brand:
Manuf No:
TT-TPX-875MPCAU
TTTPX875MPCAU
Shipping Weight:
4 KG (Includes product packaging)
Estimate Shipping
All stock codes associated to this product
TTTPX875MPCAU, TT-TPX-875MPCAU
   
 

Compliance with Intel ATX 12V 2.3 & SSI EPS 12V 2.91 standards.
80 PLUS Bronze certified - provide up to 88% effective power conversion to cut- down electric cost.
24/7 @ 50 C: Guaranteed to deliver 575W / 675W / 775W / 875W continuous output power.
Double-forward switching circuitry: compared with traditional circuitry, double- forward switching circuitry offers low power loss and high reliability.
Unparalleled DC to DC converters for 3.3V and 5V outputs to reach high efficiency.
S.P.T. indicator: PSU status monitor with 3-mode LED (standby / PG signal / temperature).
12Vin1: single +12V rail design providing up to 48A / 56A / 64A / 72A.
High quality Japanese capacitors: ensure superb performance and reliability.
Solid state capacitors: great stability at higher operating temperatures, frequencies and currents.
Fan Delay Cool Technology: allow fan to continue to operate after system shuts-down to ensure all components are properly cooled.
Multi-GPU ready: support up to two PCI-E 6+2pin & two PCI-E 6pin for PCI-Express graphic cards.
Auto switching circuitry for universal AC input from 90-264V.
Active Power Factor Correction (PFC) with PF value of 0.95 at full load.
High reliability: MTBF>120,000 hours.
DIMENSION: 5.9"(W) x 3.4"(H) x 6.3" (L); 150mm(W) x 86mm(H) x 160mm(L).
Built in industrial-grade protections: Over Current, Over Power, Over Voltage, Under Voltage, and Short-Circuit protections.
Safety / EMI Approvals: UL/ CUL, TUV, FCC, CE, BSMI and GOST certified.

 


 

     

Industrial-grade capacitors provide uncompromised performance and reliability.

 
 

     

S.P.T. indicators enable the user to check the power supply status themselves by viewing the standby, PG signal and temperature LED.

Powerful single +12V rail provide best performance for PCs with high-performance components.

With DC to DC converter of +3.3V & +5V circuit built in, the power supply provides superior dynamic response and great system stability.




 
 

Cable management design improves internal airflow and reduce clutter.

 

 
 
 

 
 
 
-C6 State CPU Mode
CPU load range from Max. to only 1W.

-Nvidia & ATI/AMD multi graphic cards configuration
Hybrid mode will cause graphic cards load range from Max. to only 1W.
New Toughpower XT series are able to maintain an ultra tight DC regulation to support the C6 state CPU mode and the hybrid graphic card power saving mode by its ZERO LOAD (0W) Design.
 

 
 
 
 

       
Main Power
Connector (24Pin) x 1
ATX 12V (4+4Pin) x 1
EPS 12V Connector (8Pin) x 1
PCI-E 8Pin (6+2Pin) x 2
       
       
SATA connector (5Pin) x 8
Peripheral Connector (4Pin) x 6
FDD Connector (4Pin) x 1
PCI-E Connector (6Pin) x 2
       
 
       

 
 
 

 
 

To better protect your power supply, FanDelayCool, enable the 14cm fan continue to operate (up to 30 seconds) after system shutdown. This is to assure all components inside the power supply to be thoroughly cooled off and gain the longest lifetime.

Unlike traditional power supplies, temperature inside Toughpower XT does not rise after system shutdown. The most important purpose of FanDelayCool is to thoroughly cool down your power supply and extend the lifetime of all the components inside. See the test results below:


 

 
 

 
 
 
 
Specifications
   
GENERAL:
- Wattage 875 Watts
- Fan 140mm Fan
1900RPM 10%
- Efficiency

up to 89%

- PFC Active PFC
- Hold-Up Time 15 ms
- Switches ATX Logic on-off additional power rocker switch
- Motherboard Connectors 24-pin Main Connector
8-pin Power Connector
4+4-pin Power Connector
- Power Good Signal 100-500 ms
- Form Factor ATX 12V 2.3
- Dimension 6.3 x 5.9 x 3.4 inch (L)x(W)x(H)
160 x 150 x 86 mm (L)x(W)x(H)
- Warranty 5 Years
- Certifications ATI CrossFireX Certified
NVIDIA SLI Certified
80PLUS Bronze Certified
AC INPUT:
- Input Voltage 100 VAC ~ 240 VAC
- Input Current 12A / 6A
- Input Frequency Range 47 ~ 63 Hz
- Inrush Current  
- Operating Range  
- MTBF 120,000
- RFI / EMI CE, CB, TUV, FCC, UL, CUL, BSMI
DC OUTPUT:
ENVIRONMENT:
- Operating Temperature 10 to 50
- Storage Temperature -20 to 70
- Operating Humidity 20% to 90%, non-condensing
- Storage Humidity 5% to 95%, non-condensing
PROTECTION:
- Over Voltage Protection Yes
- Over Current Protection Yes
- Over Load Protection Yes
- Over Termperature Protection Yes
- Under Voltage Protection Yes
- Short Circuit Protection  
 
 

No additional files, specification sheets, guides or documentation found for product.

Warranty: 1 Year Return to Base

Full manufacturers warranty details are available at the manufacturers (ThermalTake) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

 
L7: 1 | TM: 0 | LM: 1 | TY: 19 | T: 2731
We accept the following with No surcharge on VISA, Mastercard and Paypal!
� Techbuy Pty Ltd 2000 - 2026 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.