All stock codes associated to this product
DE224C, DE-224C, DL15033
DE-224C Boot ROM
Description
The DE-224C can be easily installed on a network adapter's onboard remote boot socket in order to permit diskless workstations to boot from a server.
Ethernet Adapter Boot ROM's
- The boot ROMs are options to be installed on the network adapters's on-board remote boot socket. They contain boot programs that permit diskless workstations to boot from a boot server. Network administrators can set up a network security scheme by pre-defining a password, a boot volume and the boot volume's content for each workstation.
DE-224C, Ethernet Boot ROM for DE-220 Series
- Allow the D-Link DE-220 Series to Remote boot up to Netware 3.x, 4.x and D-Link's Superboot program
- Permits stations to boot operating system from server eliminating the need for floppy or hard drives.
- This ROM only supports Ethernet_802.2 RPL and Ethernet_802.3 NCP remote booting
- Auto-sensing on which protocol, will run at any setting that DE-220 series adapter can use.
- Easy implemented Netware NCP and RPL protocol
- OS/2 and LanServer supported
- Runs at any setting DE-220 can use
- Ethernet IEEE 802.3 10Mbit/sec hardware spec. compliant
- Supports any Ethernet topology
- Single 16K boot ROM
- Card is socketed for ROM
DE-534, Ethernet Boot ROM for DE-530CT
- Ethernet Boot ROM supporting LANsmart, Novell and Microsoft products for DE-530CT
DFE-504, Ethernet Boot ROM for DFE-500TX
- Ethernet Boot ROM supporting LANsmart, Novell and Microsoft products for DFE-500TX
NV-610, Ethernet Boot ROM for 8-bit ISA Adapters
- Ethernet Boot ROM supporting Novell Netware for 8-bit ISA Adapters
NV-620, Ethernet Boot ROM for 16-bit ISA Adapters
- Ethernet Boot ROM supporting Novell Netware for 16-bit ISA Adapters
- Works with any NE-2000 plug compatible adapter
Features
- Supports Any Ethernet Topology
- Easy Implemented Netware NCP & RPL Protocol
Networking
