All stock codes associated to this product
X8DTiF, X8DTi-F, MBX8DTiF, MB-X8DTi-F
Key Features
1. Dual Intel 5500 series Xeon Quad/Dual-Core, with QPI up to 6.4 GT/s
2. Intel 5520 (Tylersburg) Chipset
3. Up to 96GB DDR3 1333/1066/800MHz ECC Registered DIMM / 24GB Unbuffered DIMM
4. Intel 82576 Dual-Port Gigabit Ethernet
5. 6x SATA2 (3 Gbps) Ports via ICH10R Controller
6. 1 (x16) PCI-E 2.0, 2 (x8) PCI-E 2.0, 1 (x4) PCI-E, 2x PCI 33MHz slots
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with Dedicated LAN
| |
Physical Stats
|
| |
| Form Factor |
|
| Dimensions |
- 12" x 13" (30.5cm x 33cm)
|
| |
Processor/Cache
|
| |
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-bit Xeon processor(s) of the same type below:
- Quad-Core Intel
XeonProcessor 5500 sequence (Nehalem-EP processor)
|
| QPI |
|
| |
System Memory
|
| |
| Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices
|
| |
| Chipset |
- Intel 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond WPCM450 BMC
|
| Network Controllers |
- Intel 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
| |
Input / Output
|
| |
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 4x USB rear ports
- 2x USB on-board
- 4x USB internal headers
- Total 8 USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option
|
Chassis ( Optimized for X8DTi-F )
|
| |
| 1U Chassis |
- CSE-111T-560C
- CSE-113TQ-700CB
- CSE-113TQ-R650CB
- CSE-815TQ-560CV
- CSE-815TQ-700CV
|
| 2U Chassis |
- CSE-213A-R900LP
- CSE-216A-R900LP
- CSE-216E1-R900LP
- CSE-216E2-R900LP
- CSE-823MTQ-R700LP
- CSE-823TQ-650LP
- CSE-825MTQ-R700LPB
- CSE-825TQ-560LPV
- CSE-825TQ-R700LPV
- CSE-826TQ-R800LPV
|
| 3U Chassis |
- CSE-833T-550
- CSE-833T-650
- CSE-833T-R760
- CSE-835TQ-R800B
- CSE-836E1-R800V
- CSE-836E2-R800V
- CSE-836TQ-R800V
- CSE-933E1-R760
- CSE-933E2-R760
- CSE-933T-R760
- CSE-936A-R900B
|
| Tower / 4U Rackmount |
- CSE-743i-645
- CSE-743i-650
- CSE-743i-R760
- CSE-743T-645
- CSE-743T-650
- CSE-743T-R760
- CSE-743TQ-865-SQ
- CSE-743TQ-865B
- CSE-743TQ-R760
- CSE-745TQ-800
- CSE-745TQ-R800
- CSE-846E1-R900B
|
| Important Chassis Notes |
- To ensure system stability, a 550W (minimum) ATX power supply
[Two 8-pin (+12V) and 24-pin are required]
|
| |
Expansion Slots
|
| |
| PCI-Express |
- 1 (x16) PCI-E 2.0 slot
- 2 (x8) PCI-E 2.0 slots
- 1 (x4) PCI-E slot
|
| PCI |
|
| |
System BIOS
|
| |
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
| Management |
| |
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- Super
 Doctor III
|
| Power Configurations |
- ACPI / ACPM Power Management
|
| |
PC Health Monitoring
|
| |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance
|
| |
| RoHS |
- RoHS Compliant 6/6, Pb Free
|
| Environmental Spec. |
- Operating Temperature: 10 to 35 C (50 to 95F)
- Non-operating Temperature: -40 to 70 C (-40 to 158 F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
OS Support
- 32 bit Windows OS: Windows XP Pro, Windows Server 2003 Enterprise Ed, Windows Vista Ultimate, Windows Server 2008
- 32 bit Linux OS: RedHat EL Linux 4.0 U6, RedHat EL Linux 4.0 U7, RedHat EL Linux 5.1, RedHat EL Linux 5.2, RedHat EL Linux 5.3, Fedora 8, Fedora 10, SuSe Linux 11, SuSE SLES 10 SP2, Ubuntu 8.10, CentOS 5.2
- 64 bit Windows OS: Windows XP Pro, Windows Server 2003 Enterprise Ed, Windows Vista Ultimate, Windows Server 2008
- 64 bit Linux OS: RedHat EL Linux 4.0 U6, RedHat EL Linux 4.0 U7, RedHat EL Linux 5.1, RedHat EL Linux 5.2, RedHat EL Linux 5.3, Fedora 8, Fedora 10, SuSe Linux 11, SuSE SLES 10 SP2, CentOS 5.2
