All stock codes associated to this product
AESN5DA35
The Snap-In Disk Array is the Addonics latest removable drive system that enable installing as many as five 3.5" hard drives into three 5.25" drive bays on any Desktop PC, Tower or 4U Rack mount system. The hard drive can be added into the Snap-In Disk Array by simply sliding the hard drive into one of the drives slots and closing the drive door, just like using a VHS cassette. To remove the hard drive, simply open the drive door and the hard drive will automatically be ejected.
The Snap-In Disk Array also increases the number of hard drives that can be installed into many systems. or storage chassis such as the Addonics family of Storage Tower. Together with Addonics Port Multiplier, you can create a powerful RAID storage with large storage capacity, drive redundancy for reliability and high performance in a compact 3-bay drive enclosure like the Addonics Storage Tower III.
Product features
- Install up to five 3.5 SATA or SAS hard drives into three 5 1/4" drive bay stack
- Drive is added and removed directly from the Disk Array without any tool
- Point to point connection
- High throughput up to 600 MB/sec with SATA 3.0 or SAS 2.0 drive
- Full Serial ATA 1.0, 2.0, 3.0, SAS 1.0 and 2.0 compliant
- Sturdy steel metal construction
- Optional 2.5 drive adapter (model: AE25SN35SA)
- Short circuit protection
- Dual high CFM and low noise cooling fans
- Use as an external RAID system (require optional external power adapters)
- Hot swap support when connects to SATA port with this feature
- Power and drive activity LED for each hard drive slot
*While the Snap-In Disk Array is capable of fitting into three 5 1/4" drive bay stack on a desktop tower, seating from the metal bracket may cause possible obstruction for insertion of the Snap-In Disk Array Click here for more information.
(1) Serial ATA hot swap feature works only with controllers basing on Silicon Image chip set from our inhouse testing. Other controllers that are not Silicon Image based may not support hot swap. You may consider adding one of the Addonics Serial ATA host controllers to your systems to ensure the hot swap capability. New controllers from Intel and other suppliers may finally support this feature. Please verify with your controller manufacturer if you need to have hot swap in your application. Hot swap is supported in Windows 2000 and XP only. On other OS, drive can be removed without crashing system. But replacing with a different drive can result in crashing the OS.
Specification
|
Interface
|
SATA/SAS
|
|
Construction material
|
Steel |
|
Hard drive type
|
SATA/SAS, SATA/SAS II or SATA/SAS III |
|
Number of drives
|
Maximum five 3.5 SATA hard drives or
five 2.5 SATA hard drives using optional 2.5 - 3.5 drive adapter (model: AE25SN25SA) |
|
MAX Data Transfer Rate
|
- 150 Mbytes/sec when connect to SATA port
- 300 Mbytes/sec when connect to SATA II / SAS port
- 600 Mbytes/sec when connect to SATA III / SAS II port
|
|
Power connection
|
Two 4-pin Molex power connectors |
|
Serial ATA connection
|
5 SATA and SAS connectors
|
|
LED's
|
|
|
Lock
|
For each hard drive slot
|
|
Hard Drive connection
|
Point to point, no cable required for installing hard drive into drive drawer
|
|
Cooling system
|
Two 60 mm cooling fans
|
|
Weight (with no hard drive)
|
4.24 lb (1.92 Kg)
|
|
Dimensions (L x W x H)
|
7.5 x 5.73 x 5 inch (190.5 x 145.6 x127 mm) |
|
Operating temperature and
humidity
|
0 60 C , 0 95% RH (non condensing) |
|
Storage temperature and
humidity
|
-20 75 C, 0 - 90% RH |
|
Warranty
|
One Year |
All specifications are subject to change without notice
System requirement
- PC/AT or Compatible System
- SATA or SAS port
- Three free 5 1/4" drive bays in one stack
- Pentium or greater
- Minimum 32 MB RAM
- 10 MB minimum free hard disk space
