HPMBundle3 | Techbuy Hardware Port Multiplier Bundle

This product is no longer available, try the TGC alternative.

Features: 5 Bay SATA(I, II or III)/SAS 6G Hot Swap Module Steel material, RoHS compliance; Electromagnetism shield design Support two 4pin power connectors Ball bearing fan with air duct Patent balance handle -- No skew in/out LED indicators Support hot swap Support all operating systems Supports RAID 0, 1, 5 functions (RAID card required)

Specifications: Drive Bay:Turn 3 x 5.25" drive bay to 5 x 3.25" hot swappable hard drive bay Interface: SATA to SATA; SAS to SAS Fan Sensor: Fan failure sensor Alarm: Overheating alarm Cooling System:One 80mm ball bearing fan with air duct provide excellent cooling air flow RAID:Supports RAID 0, 1, 5 functions (RAID card required) Power Connector: 4 pin molex power connector x 2 Data Connector: SATA (I, II or III)/SAS 6G data port x 5 Dimensions(L x W x H):8.5 x 5.75 x 5 inch Weight: 5 lbs

5-Port HPM-XA System Version

 

Product Features

• Choice of system model and enclosure model
  • system model - Connect up to 5 SATA hard drives to one SATA port inside any system
  • enclosure model - connect up to 5 SATA hard drives or optical drives in external enclosure to any system via any eSATA port (or USB 3.0 / 2.0 port using optional USB 3.0 - eSATAp adapter)
• RAID configuration is programmed using onboard jumpers for simple deployment. View detailed jumper configuration diagram
• Integrated hardware RAID controller to maximize performance
• Software included for RAID management and advanced RAID configuration
• Compatible with Compact Flash or Micro Drive using Addonics SATA CF adapters (ADSAHDCF or ADSACF)
• Compatible with SATA optical drives - support simultaneous DVD writing*
• RAID volume can be used as a boot drive or as additional storage
• Multiple units can be daisy chained
• System version mounts in any standard height or low profile PCI slot
• Enclosure version designed to fit Addonics Storage Tower, Mini Storage Tower, Storage Rack or multi-bay drive enclosure with SCSI-1 (Centronic 50-pin) back panel
• Supports RAID0 (Striping), RAID1 (Mirroring), RAID3, RAID5 (Parity), RAID10 (Mirrored Striped), JBOD (Concatenation), Clone Mode (N-Way Mirror) using built-in hardware RAID.
• Supports individual drive mode*
• Clone mode - clone's action is similar to RAID 1, except all the hard drives connected will be mirrored. Clone mode is especially useful when users would like to copy data form a hard drive to several hard drives at the same time.
• Supports hot swap when attached to controllers that support this feature.
• Drive activity LED and Error LED for Host and 5 SATA devices
• OS Support: Windows 2000, XP, 2003, Vista, Mac OS X and above, Linux kernel 2.6 and above

* Independent drive configuration and optical drive are supported only when connecting to controllers with Silicon Image Sil3124, Sil3132 chip set or controllers that are PM compatible. Simultaneous DVD writing was tested using the Nero Burning Rom

Specifications

• 5 internal SATA ports for SATA / SATA II storage devices
• Drive activity LED and Error LED for Host port and 5 SATA devices
• Auto-negotiation support for 1.5Gbps and 3.0Gbps SATA
• Compliant with SATA I/II specification
• Support SATA optical devices
• Chipset : JMicron JMB393
• Support 48-bit LBA addressing
• Supports Hot-swapping
• Supports NCQ (Native Command Queuing)
• OS support: Windows 2000, XP, 2003, Vista, Mac OS X and above, Linux kernel 2.4 and above, Mac OS X 10.4.x
• Dimensions: (W x D x H) - 3.4 x 2.2 x .9 in. (85mm x 55mm x 23mm)
• Weight: 48g
• Operating temperature range: 0 C to +70 C
• Operating humidity range: 5% to 90%
• Storage temperature range: -40 C to +85 C
• Storage humidity range: 5% - 95% (non condensing)
• 1 year warranty

Note: specification subject to change without notice

This new family of PCI Express controllers offer the latest 3G/sec SATA performance and configuration flexibility at an amazingly affordable price. Comes with choice of 2 internal SATA II ports or 2 eSATA II ports for external SATA connection. both controllers can also be installed in low profile PCs using the bundled low profile bracket. The two ports can be configured as individual ports, as RAID 1, 0, 0+1, RAID 5 or JBOD. Both controllers are also Port Multiplier compatible, thus offering potential expansion capability and new storage solutions

 

Product Features

Specifications

• 48 bits LBA, support HDD partition larger than 137GB
• Supports 1-lane 2.5Gbps PCI Express
• Hot-plug capability
• SATA II transfer rate of 3.0Gbps
• Fully compliant with Serial ATA 1.0 specifications
• Supports two independent Serial ATA channels
• Independent Link, Transport, and data FIFO
• Independent command fetch, scatter/gather, and command execution
• Supports Legacy Command Queuing (LCQ)
• Supports Native Command Queuing (NCQ)
• Supports Non-zero offsets NCQ
• Supports Out of order data delivery NCQ
• Supports FIS-based switching with Port Multipliers
• 31 Commands and Scatter/Gather Tables per Port
• Two Pin headers on board for LED connection
• Temperature: Operating 0 to 70 degree C.
• Storage: -25 to 90 degree C.
• Humidity: Operating 20% to 80%
• Non Operating 15% to 90%
• RAID 0, 1, 0 + 1, RAID 5 and JBOD firmware on board
  To install OS onto a single hard drive (not in a RAID set), it must be connected to the 1st port (the lowest port on the PCI bracket). The controller BIOS must be set to 'CONCATENATED'
• Completely with drivers for Windows 2000 , XP, and 2003 Server, Vista
• RoHS Compliant