Repotec RP-PEG080W Gigabit Switch - 8-Port 10/100/1000 PoE

RP-PEG080W supports 8 10/100/1000Mbps Auto-negotiation, Auto-MDIX Ethernet ports and Power over Ethernet to IEEE 802.3af compliant devices. Its fully compliant with the standards of IEEE 802.3/u/x/z/ab/af. With web-based management, the network administrator can logon the switch to monitor, and configure. In addition, the switch implements the QoS (Quality of Service), Port Mirror, VLAN, LACP, LAN security, Multicasting video stream protocol, and SNMP v2c. It is suitable for SMB application.
PoE allows power to be supplied to end devices, such as Wireless Access Point IP cameras or VoIP Phones, directly through the existing LAN cables. By supplying the power mid-span, you can centralize power distribution and backup without the need to increase infrastructure. RP-PEG080W supports up to 4-port 15.4W PoE function and RP-PEG080WF supports up to 8-port 15.4W PoE function.

 

	PoE Save Your Power Infrastructure and Installation Cost
	Port Mirroring helps supervisor monitoring network
	IEEE802.1x Access Control improve network security
	65 or 130 watts of total power diversified options

 

Standards	IEEE 802.3af PoE Standard IEEE 802.3 10Base-T Ethenet(twisted-pair copper) IEEE 802.3u 100Base-T Ethernet(twisted-pair copper) IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper) IEEE 802.3z 1000Base-X Ethernet IEEE 802.3x Flow Control capability ANSI/IEEE 802.3 Auto-negotiation IEEE 802.1p Priority Tag IEEE 802.1q VLAN
Interface	8* 10/100/1000Mbps RJ-45 Auto-Negotiation and Auto-MDIX
Switching Capacity	8 Gigabit Ethernet ports with non-blocking wire speed performance 8 K MAC addresses 176KB on-chip frame buffer Jumbo frame support up to 9.6K bytes
VLAN	Port-base VLAN IEEE802.1q tag-base VLAN, 4K Max
QoS	Supports Layer 4 TCP/UDP Port and ToS Classification Supports 802.1p QoS with four level priority queue
STP/RSTP	802.1D/1w
Multicasting	Supports IGMP Snooping for Multicast
Bandwidth Control	Supports bandwidth rating per port ingress and egress rate limit 1000Mbps with 1Mbps
Port Trunk	Port trunking with 8 trunking group up to 8 ports for each group
Broadcast/Multicast Storm	Broadcast Storm control
Port Mirroring	All port support port mirroring
PoE Specification	Supports IEEE 802.3af compliant Supports Power over Ethernet (PSE) on each Gigabit UTP port Full power support for per POE port Auto detect powered device and consumption levels Supports per port power consumption monitoring Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority Circuit protection to prevent power interference between ports Supports per port PoE State setting Supports per port power priority setting LED indicators for POE ready and POE activity 65 or 130 watts of total power diversified options
LED	Power (Green) Port 1 to 8: ACT/FDX/ SPD(Green/Amber), PoE (Green) Port 1 to 8: PoE (Green)
Power Consumption	Max. 65W (with 4 * 15.4W PD device connected) -RP-PEG080W Max. 130W (with 8 * 15.4W PD device connected) -RP-PEG080WF
Power Supply	Internal Power supply 100~240VAC, 50/60Hz
Environment	Operating Temperature: 0C to 40C Operating Humidity: 5% to 90% (Non-Condensing)
Dimensions	44 * 280 * 166 mm
Certification	FCC, CE