All stock codes associated to this product
SSTST1000GEVO, SST-ST1000-G-EVO
To make great power supplies even better, SilverStone engineers delved into the details with the Strider Gold series. In order to reduce the already low noise generated by the Strider Gold, they replaced the fan with SilverStones own Air Penetrator, which has superb cooling ability and is equipped with fluid dynamic bearing. This allowed for reprogramming of the fan controller to enable lower fan speed at any given loading condition compared to the predecessor. Various components were also re-tested and replaced with newer versions for minor boost in efficiency and performance. An excellent FF141 fan filter with magnets is even included in the package for use to reduce dust buildup.
With the fan and component upgrades, the Strider Gold Evolution series will again encompass wattage range from 750W to 1200W with 80 PLUS Gold level efficiency, 3% voltage regulation, 3% ripple & noise, and high amperage single +12V rail as its main features. For discerning users looking to get a top-notch power supply with all features covered and more, this is the perfect solution.
Features:
- 80 PLUS Gold certification with high efficiency 88%~91% at 20%~100% loading
- Ultra silent 139mm Air Penetrator fan with fluid dynamic bearing
- FF141 magnetized fan filter included
- 100% modular cables
- 1000W (1100W peak power) 24hour fully continuous power output with 40 operating temperature
- Class-leading single +12V rail with 83A
- Strict 3% voltage regulation and low ripple & noise
- Japanese main capacitors
- Dual EPS 8pin with multiple PCI-E 8pin and PCI-E 6pin connectors support
- Support ATX 12V 2.3 & EPS 12V
Specifications:
Model No.
|
SST-ST1000-G Evolution
|
Max. DC Output
|
1000W (Peak 1100W)
|
Load Range
|
|
+3.3V |
+5V |
+12V1 |
+5VSB |
-12V |
|
25A |
25A |
83A |
3.5A |
0.3A |
|
0.3A |
0.3A |
0.1A |
0.1A |
0A |
|
3% |
3% |
3% |
5% |
10% |
|
1% |
1% |
1% |
1% |
1% |
|
50mV |
50mV |
120mV |
50mV |
120mV |
|
combined +3.3, +5V
|
150W
|
combined +12V
|
996W / 83A
|
Input Voltage
|
90V~264V
|
Input Frequency Range
|
47Hz ~ 63Hz
|
PFC
|
Active PFC.PF>0.95 at Full Load
|
Efficiency
|
88%~91% at 20%~100% loading
|
MTBF
|
100,000 hours at 25Cat Full Load
|
Operating temperature
|
0C ~ 40C
|
Protection
|
Over Current Protection Over Power Protection Over Voltage Protection Over Temperature Protection Under voltage protection Short Circuit Protection No Load Protection
|
Connectors
|
1 x 24 / 20-Pin Motherboard connector 550mm 1 x 8 / 4-Pin EPS / ATX 12V connector 750mm 1 x 8 / 4-Pin EPS / ATX 12V connector 550mm 4 x 8/6-Pin PCIE connector 550mm 2 x 6-Pin PCIE connector 550mm / 150mm 8 x SATA connector 600mm / 150mm / 150mm/150mm 6 x 4-Pin Peripheral connector 600mm / 150mm / 150mm 2 x 4-Pin Floppy connector 600mm / 150mm / 150mm / 150mm
|
Color
|
Black (scratch resistant and lead-free paint)
|
Cooling System
|
Ultra silent 139mm Air Penetrator fan with fluid dynamic bearing
|
Noise Level
|
17dBA-28dBA
|
Dimension
|
150 mm (W) x 86 mm (H) x 180 mm (D)
|
Weight
|
3.255 kg
|
Certification
|
80 PLUS Gold
|
Other
|
GPU Support list
|
REMARK
1. |
Design for 80 PLUS Gold level of efficiency to reduce wasted heat and save electricity.
|
2. |
100 modular cable design for use with short cable kit such as SilverStones PP05 or for easy removal in case with cable routed and tied down.
|
3. |
Powerful single +12V rail design, perfect for future high-end component upgrades or overclocking.
|
4. |
3 regulation and low ripple & noise performance for high stability.
|
5. |
Ultra silent 139mm Air Penetrator fan with fluid dynamic bearing.
|
6. |
The included FF141 fan filter can help reduce dust buildup; and with its built-in magnets, its also extremely easy to attach and remove.
|
Installation guide: Please make sure the fan of power supply and FF141 filter are properly aligned. The embedded magnet on FF141 can be effortlessly attached to any steel power supply. Notice: Please make sure the chassis have enough space to accommodate with power supply and FF141. |