All stock codes associated to this product
ES5808P, ES-5808P, NWEES5808P, NWE-ES-5808P
The features 8 IEEE 802.3af Power over Ethernet (PoE) ports which supply electricity of up to 15.4 watts per port. It can convert standard 90~260V/AC power into low-voltage DC that runs over an existing LAN cable to supply the power for IEEE 802.3af compliant network accessories. The also features PoE detection to verify whether the connected device is IEEE 802.3af compliant or not. If it is not a PoE device (PE), only the data will be sent through LAN cable. The can connect with different PoE products such as Access Points, IP cameras or IP phones. It is a supremely viable solution when power outlets are difficult to install or are out of reach.
The ES-5808P features 8 IEEE 802.3af Power over Ethernet (PoE) ports which supply electricity of up to 15.4 watts per port. It can convert standard 90~260V/AC power into low-voltage DC that runs over an existing LAN cable to supply the power for IEEE 802.3af compliant network accessories. The ES-5808P also features PoE detection to verify whether the connected device is IEEE 802.3af compliant or not. If it is not a PoE device (PE), only the data will be sent through LAN cable. The ES-5808P can connect with different PoE products such as Access Points, IP cameras or IP phones. It is a supremely viable solution when power outlets are difficult to install or are out of reach.
No Special Networking Cable Required
Just use the standard Cat-5 Ethernet cable to link between the ES-5808P and the powered devices (PE). This Ethernet cable can transmit both data and power. No power wire is needed for the powered devices (PE). This reduces installation time and cost.
Supports Smart Features
The ES-5808P Web smart features can be managed through a Web Browser. The smart features include simple QoS/CoS applications and basic monitoring tools to improve network efficiency. The ES-5808P also supports bandwidth control and port based VLAN. Through a Web interface, an administrator can set up VLANs to segregate traffic and QoS to prioritize mission-critical data. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely increasing the IT manager's mobility.
Supports Auto-MDI/MDI-X
Every port of the ES-5808P can automatically detect the type of cable. There is no need to choose crossover or parallel cables when you are connecting this switch to another switch or to a computer.
Supports Auto-Negotiation
Ports of the ES-5808P can automatically detect whether the connected network devices are running at 10Mbps, 100Mbps or Half/Full-Duplex mode. The ES-5808PE can also adjust the speed and mode accordingly.
Supports Non-Blocking wire speed
The ES-5808P receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port of the ES-5808P has speeds of up to 200Mbps in full-duplex mode simultaneously. This feature provides full wire speed to the connected devices and allows you to run a high speed network smoothly.
Supports Store and Forward Architecture
With the store and forward architecture, the ES-5808P can maximize network performance while minimizing the propagation of bad network packets.
- Complies with IEEE 802.3/802.3af/802.3x/802.1p/802.1q standards
- Supplies 48V/DC with 15.4W output per port
- Store-and-Forward architecture
- Provides port based remote power On/Off to restart connected PoE devices individually
- Supports Auto MDI/MDI-X and Auto-Negotiation
- Supports 4-group port based VLAN, and password-protected configuration
Specifications:
|
Standards
|
IEEE 802.3af Power over Ethernet
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow Control
IEEE 802.1p Class of Service, Priority Protocols
|
| Features
|
Number of Ports: 8 PSE/Power over Ethernet Ports
MAC Address: 1K
Buffer Memory: 512K bits
Transmission Method: Store and Forward
|
|
Smart Features
|
Web-based management with password access Port Base VLAN
QoS
Port Settings
PoE Port On /Off Settings
|
|
Filtering/Forwarding Rates
|
100Mbps port - 148,800pps
10Mbps port - 14,880pps
|
|
Transmission Media
|
10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
|
|
Led Indicators
|
Per Port: Link/Act, PoE Act/Status
Per Unit: Power
|
|
Power Input
|
100~240V/AC, 50~60Hz
|
|
Powe Output
|
48V/DC Per Port Output 15.4 W Max Per Port
8 Ports at Full 15.4 W Output Supported
|
|
Power Consumption
|
120 Watts (Max) |
|
Dimension
|
266 160 42 (L x W x H) |
|
Weight
|
1.4 kg |
|
Operating Temperature
|
0 to 60? |
|
Storage Temperature
|
-20 to 90? |
|
Humidity
|
10 to 90% RH (non-condensing) |
|
Certifications
|
FCC Class A, CE
|
Networking
