All stock codes associated to this product
EDES5824P, ED-ES-5824P
ED-ES-5824P
ES-5824P 24-port 10/100M 802.3af PoE Web Smart Switch + 2 Giga Combo SFP (15.4W per port / Max 370W)
Description
The ES-5824P is a 24-port 10M/100M with 24-port PSE/PoE Rack-mount PoE Web Smart Fast Ethernet Switch that is designed for medium or large network environment to strengthen its network connection. Including rack-mount brackets, the 19" size fits into your rack environment. It is a superb choice to boost your network with better performance and efficiency.
Complies IEEE 802.3af Power over Ethernet (PoE) ports
The ES-5824P features 24 IEEE 802.3af Power over Ethernet (PoE) ports which supply electricity of up to 15.4 watts per port. It can convert standard 90~260V/AC power into low-voltage DC that runs over an existing LAN cable to supply the power for IEEE 802.3af compliant network accessories. The ES-5824P also features PoE detection to verify whether the connected device is IEEE 802.3af compliant or not. If it is not a PoE device (PE), only the data will be sent through LAN cable. The ES-5824P can connect with different PoE products such as Access Points, IP cameras or IP phones. It is a supremely viable solution when power outlets are difficult to install or are out of reach.
No Special Networking Cable Required
Just use the standard Cat-5 Ethernet cable to link between the ES-5824P and the powered devices (PE). This Ethernet cable can transmit both data and power. No power wire is needed for the powered devices (PE). This reduces installation time and cost.
Supports Smart Features
The ES-5824P Web smart features can be managed through a Web Browser. The smart features include simple QoS/CoS applications and basic monitoring tools to improve network efficiency. The ES-5824P also supports bandwidth control and port based VLAN. Through a Web interface, an administrator can set up VLANs to segregate traffic and QoS to prioritize mission-critical data. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely increasing the IT manager's mobility.
Supports Auto-MDI/MDI-X
Every port of the ES-5824P can automatically detect the type of cable. There is no need to choose crossover or parallel cables when you are connecting this switch to another switch or to a computer.
Supports Auto-Negotiation
Ports of the ES-5824P can automatically detect whether the connected network devices are running at 10Mbps, 100Mbps or Half/Full-Duplex mode. The ES-5824P can also adjust the speed and mode accordingly.
Supports Non-Blocking wire speed
The ES-5824P receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port of the ES-5824P has speeds of up to 200Mbps in full-duplex mode simultaneously. This feature provides full wire speed to the connected devices and allows you to run a high speed network smoothly.
Supports Store and Forward Architecture
With the store and forward architecture, the ES-5824P can maximize network performance while minimizing the propagation of bad network packets.
- Complies with IEEE 802.3/802.3af/802.3u/802.3x/802.1p/802.1q standards
- Supplies 48V/DC with 15.4W output per port
- Store-and-Forward architecture
- Provides port based remote power On/Off to restart connected PoE devices individually
- Supports Auto MDI/MDI-X and Auto-Negotiation
- Supports IGMP snooping to optimize network performance
- Supports24 port based VLAN and 20 Tag Base VLAN groups
- Supports 2 Trunking groups (4 ports per group and up to 2 groups for each device)