Please choose carefully, we are unable to refund or exchange for incorrect choice. This memory is generally system/server specific and we recommend the use of our Kingston memory selector to ensure compatibility
All stock codes associated to this product
KVR13E9/4I, 740617205749
KVR13E9/4I
4GB 2Rx8 512M x 72-Bit PC3-10600
CL9 240-Pin ECC DIMM
DESCRIPTION
This document describes ValueRAM's 512M x 72-bit (4GB)
DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8, ECC,
Intel® Compatibility Tested, memory module, based on eighteen
256M x 8-bit FBGA components. The SPD is programmed to
JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V.
This 240-pin DIMM uses gold contact fingers. The electrical
and mechanical specifications are as follows:
FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Thermal Sensor Grade B
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 1.18” (30mm), double sided component
SPECIFICATIONS
CL(IDD): 9 cycles
Row Cycle Time (tRCmin): 49.5ns (min.)
Refresh to Active/Refresh: 160ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin): 36ns (min.)
Maximum Operating Power: 2.700 W* (per module)
UL Rating: 94 V - 0
Operating Temperature: 0o C to 85o C
Storage Temperature: -55o C to +100o C
