IMG 1 of 1
No Longer Available

Part Number:
219673
(?) Brand:
Manuf No:
KHX18C9T2K4/16X
Shipping Weight:
0.5 KG (Includes product packaging)
Estimate Shipping
Date Added:
All stock codes associated to this product
KHX18C9T2K4/16X
KHX18C9T2K4/16X
 
16GB (4GB 512M x 64-Bit x 4 pcs.)
 
DDR3-1866 CL9 240-Pin DIMM Kit
 
DESCRIPTION
 
Kingston's KHX18C9T2K4/16X is a kit of four 512M x 64-bit (4GB) DDR3-1866 CL9 SDRAM (Synchronous DRAM), 2Rx8 memory modules, based on sixteen 256M x 8-bit FBGA
components per module. Each module kit supports Intel® XMP (Extreme Memory Profiles). Total kit capacity is 16GB. Each module kit has been tested to run at DDR3-1866 at a low latency timing of 9-11-9 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers. The JEDEC
standard electrical and mechanical specifications are as follows:
 
XMP TIMING PARAMETERS
 
JEDEC: DDR3-1333 CL9-9-9 @1.5V
XMP Profile #1: D3-1866 CL9-11-9 @1.65V
XMP Profile #2: D3-1600 CL9-9-9 @1.65V
 
Features:
 
  • JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or
    MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • PCB : Height 2.122” (53.90mm) w/ heatsink, double sided component
 
Specifications:
 
  • CL(IDD): 9 cycles
  • Row Cycle Time (tRCmin): 49.5ns (min.)
  • Refresh to Active/Refresh: 160ns (min.)
  • Command Time: (tRFCmin)
  • Row Active Time (tRASmin): 36ns (min.)
  • Maximum Operating Power: 2.400 W* (per module)
  • UL Rating: 94 V - 0
  • Operating Temperature: 0o C to 85o C
  • Storage Temperature: -55o C to +100o C

No additional files, specification sheets, guides or documentation found for product.

Warranty: 1 Year Return to Base

Full manufacturers warranty details are available at the manufacturers (Kingston) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

 
L7: 1 | TM: 1 | LM: 0 | TY: 1 | T: 259
We accept the following with No surcharge on VISA, Mastercard and Paypal!
© Techbuy Pty Ltd 2000 - 2024 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.