All stock codes associated to this product
J9727A, 2373562, 16HHP2920J9727A, 16H-HP2920-J9727A, 886112322144, 886112322168, NHHP-J9727A
In addition, the 2920 switch series supports up to four optional 10 Gigabit Ethernet (SFP+ and/or 10GBASE-T) ports, as well as a two-port stacking module. These options provide you with flexible and easy-to-deploy uplinks and stacking.
Together with static and RIP routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the HP 2920 Switch Series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at the enterprise edge, in remote branch offices, and in converged networks.
Features
Quality of Service (QoS)
-
- Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues
-
- Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
-
- Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
-
- Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue minimums
-
- Large buffers: provide graceful congestion management
-
Connectivity
-
- Flexible 10 Gbps Ethernet connectivity: up to four optional 10-Gigabit ports (SFP+ and/or 10GBASE-T)
-
- Two-port stacking module with up to 40 Gbps/port: optional two-port stacking module allows stacking of up to four switch units into a single virtual device
-
- Auto-MDIX: provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
-
- IPv6: IPv6 host: allows the switches to be managed and deployed at the edge of IPv6 networks. Dual stack (IPv4/IPv6): provides transition mechanism from IPv4 to IPv6; supports connectivity for both protocols. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
-
- IEEE 802.3at Power over Ethernet (PoE+): provides up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments
-
Performance
-
- Energy-efficient design: High-efficiency power supplies: 80 PLUS Silver Certified power supply increases power savings. Energy-efficient Ethernet (EEE) support: reduces power consumption in accordance with IEEE 802.3az.
-
- HP ProVision ASIC architecture: is designed with the latest HP ProVision ASIC, providing very low latency, increased packet buffering, and adaptive power consumption
-
- Selectable queue configurations: allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications
-
Software-defined networking
-
- OpenFlow: is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths
Specifications
Ports
- 20 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)<br>Duplex: 10BASE-T/100BASE-TX: half or full
- 1000BASE-T: full only
- 4 RJ-45 dual-personality 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
- 2 module slots
- 1 stacking module slot
- 1 dual-personality (RJ-45 or USB micro-B)
- 1 USB 1.1
- 1 RJ-45 out-of-band management port
-
Memory and processor
Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, packet buffer size: 11.25 MB (6.5 MB dynamic egress + 4.5 MB ingress), 1 GB flash
Latency
-
- < 3.3 s (FIFO 64-byte packets)
-
Throughput
95.2 million pps
Switching capacity
128 Gbps
Management features
- HP PCM+
- IMC - Intelligent Management Center
- command-line interface
- Web browser
- configuration menu
- out-of-band management (RJ-45 Ethernet)
- SNMP Manager
- Telnet
- RMON1
- FTP
- in-line and out-of-band
- out-of-band management (serial RS-232C or Micro USB)
-
Power and operating requirement
Power consumption
475 W (maximum), 42 W (standby)
Operating temperature range
0 to 55C
Operating humidity range
15 to 95% (noncondensing)
Power supply name
1 x J9738A
Heat dissipation
358 BTU/hr (377.69 kJ/hr)
Dimensions and weight
Minimum dimensions (W x D x H)
44.25 x 33.6 x 4.4 cm
Weight
5.46 kg
What's included
Differentiator
24-port basic L3 10/100/1000 PoE+ switch with 2 slots for optional 10G modules, 1 slot for optional stacking module and a modular power supply
Warranty
Lifetime, advance replacement, next business day
Networking
