All stock codes associated to this product
J9622A, NHHPJ9622A, NHHP-J9622A, 885631740064
HP MSM466 Dual Radio 802.11n Access Point (WW) (J9622A)
This highest-performance family of access points improves productivity. HP is the first in the industry to offer three spatial stream MIMO technology to enterprise businesses.
This brings IEEE 802.11n near Gigabit Ethernet performance to 900 Mbps and enhances coverage areas with beamforming technology. These APs deliver the highest performance in 802.11n AP technology with outstanding price and performance.
Each dual radio 802.11n access point operates in the 2.4 GHz and 5 GHz bands, providing backward compatibility for IEEE 802.11a/b/g legacy client devices. These APs can operate with or without a wireless controller and support all the same enterprise features as the prior HP MSM wireless products, in addition to new features, such as beamforming, bandsteering, and concurrent 5 GHz operation. The MSM466 and MSM466-R access points also support a range of MIMO antennas, while the MSM466-R access point is in an outdoor enclosure and is designed to work under adverse conditions.
Features
Management
-
- Wi-Fi Clear Connect: provides a system-wide approach to improve WLAN reliability by proactively determining and adjusting to changing RF conditions; helps optimize WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources using Spectrum Analysis capabilities built into the access points, identifying rogue activity and making decisions at a system-wide level
-
- Advanced radio resource management: Automatic radio power adjustments: include real-time power adjustments based on changingenvironmental conditions and signal coverage adjustment. Automatic radio channel: provides intelligent channel switching and real-time Interferencedetection. Intelligent client load balancing: determines number of clients across neighboring APs and adjustsclient allocation to balance the load. Airtime fairness: provides equal RF transmission time for wireless clients.
-
- Spectrum analysis : Power/frequency spectrum analysis: measures noise from IEEE 802.11 remote sources. Signal detection/classification: identifies source of RF interference, for example, Bluetooth, cordless phones, and microwave ovens. Evaluation of channel quality: helps detect severe channel degradation and improve thereporting of poor RF performance.
-
- Integrated IDS: detects and locates unknown and rogue devices (see controllerdatasheet for details)
-
- Access point management: provides secure Web browser (SSL and VPN), command-line interface, SNMP v2c, SNMP v3, MIB-II with traps, and RADIUS Authentication Client MIB (RFC 2618); offers embedded HTML management tool with secure access (SSL and VPN); implements scheduled configuration and firmware upgrades from a central controller
-
Quality of Service (QoS)
-
- Rate limiting: supports per-wireless client ingress-enforced maximums andper-wireless client, per-queue guaranteed minimums
-
- Centralized traffic: maintains Layer 2 and Layer 3 QoS settings when using centralized traffic or guest access
-
- IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
-
- Wireless: L2/L3/L4 classification: supports IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ. Virtual Service Community (VSC): assigns Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority. VoIP call capacity: supports 12 active calls per radio, maximum.
-
- SpectraLink Voice Priority (SVP) support: prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to help ensure excellent voice quality
-
Connectivity
-
- IEEE 802.3af Power over Ethernet (PoE) support: simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
-
- Auto-MDIX: adjusts automatically for straight-through or crossover cables on the Ethernet interface
-
Mobility
-
- Three spatial stream MIMO technology: provides the latest in Wi-Fi technology, which allows for 450 Mbps of signaling per radio; delivers potentially more than a 50 percent increase in performance over any two spatial stream product
-
- Beamforming: provides better coverage area and better performance at distances from the AP
-
- Bandsteering: redirects 5 GHz-capable clients automatically to the less-congested 5 GHz spectrum
-
- Concurrent operation in the 5 GHz band: provides the ability to run both radios in the 5 GHz band for outstanding performance (MSM466 and MSM466-R access points only)
-
- MSM430 and MSM460 AP antennas: provides excellent coverage through use of embedded high-gain antennas (5 dBi antenna at 2.4 GHz and 7 dBi antenna at 5 GHz); no need for the added cost of external antennas
Specifications:
Specifications
Ports
-
- 1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)<br>Duplex: 10BASE-T/100BASE-TX: half or full
- 1000BASE-T: full only
- 1 RJ-45 serial console port
-
Mounting
Includes two ceiling mounting clips
Power and operating requirements
Power consumption
12.9 W (maximum)
Operating temperature range
0 to 50C
Operating humidity range
5 to 95% (noncondensing)
Dimensions and weight
Minimum dimensions (W x D x H)
20.32 x 17.15 x 6.65 cm
Weight
1.02 kg
What's included
Differentiator
The HP MSM466 Access Point is a dual radio IEEE 802.11n indoor access point, supporting three spatial stream MIMO; has external connectors only for use with indoor and outdoor antenans; for use in worldwide markets.
What's in the box
(1) HP MSM466 Dual Radio 802.11n Access Point (WW)
Warranty
Lifetime, advance replacement, next business day, phone support, software releases
Networking
