All stock codes associated to this product
DGS-108, DGS108, 2509940, 16DGS108, DGS-108 , DLDGS108, 790069370663, 790069430831
8-Port Unmanaged Gigabit Switch
DGS-108
Overview
D-Links DGS-108 Gigabit Ethernet switch provides a cost-effective way for SOHO and SMB to create a small network and connect computers, wireless Access Points, IP cameras, network printers and other Ethernet devices quickly and easily without complicated configurations. This switch comes with 8 Gigabit Ethernet ports with an auto-sensing function to detect the maximum speed of the connected devices, allowing you to run your network with the best possible performance. Its fanless design makes the DGS-108 completely silent, ideal for offices, libraries or meeting rooms.
- 8 Port Gigabit Ethernet Switch
- Plug-n-Play Installation
- Speeds Up to 10x Faster than 10/100 Ethernet
- IEEE 802.1P QoS Support for Superior Traffic Prioritization
- Intelligent cable diagnostics for efficient troubleshooting.
- Gigabit Ports for Incredible Wired Network Speeds
- High reliability with Rugged Metal Case and High MTBF
Robust Design
The DGS-108 is designed with durability and performance in mind. The sturdy metal housing will protect the switch against accidental harm, while helping to dissipate heat and to reduce stress on internal components. The visible LEDs allow for an easy reading of each port status and speed, helping to troubleshoot connectivity problems. For a convenient placement, the DGS-108 comes with a wall mounting kit and a slot for a Kensington security lock to protect it from theft.
QoS (Quality of Service)
Despite being an unmanaged, Plug and Play switch, the DGS-108 is able to classify network traffic by assessing the 802.1p field in the Ethernet frames, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality.
Cable Diagnostics Function
The cable diagnostics function enables users to quickly troubleshoot faulty network cables that may lead to transmission errors. At startup, the switch performs a micro-test to assess the quality of the cables connected to its ports. If a fault is detected, the ambar LED will lit up. If the cables pass the test, the green LED will be illuminated, indicating that the network is error-free. This feature can save valuable time when trying to single out a faulty cable that causes problems in the whole network.
Power-saving Technology
The DGS-108 is part of D-Link Green, D-Links eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the 802.3az Energy Efficient Ethernet (EEE) standard, which can save a substantial amount of energy by detecting the port status, putting them in low-power, stand-by mode when no network traffic is detected. Additionally, the Green Ethernet technology in the DGS-108 can detect the length of the network cables connected to its ports and provide only the right amount of energy required. This helps businesses to save money by reducing their electricity bills with no compromise on performance.
Features
Main type of ports
1000BASE-T Gigabit Ethernet
Number of ports
5 to 10 ports
Switching capacity
16 Gbps
Form Factor
Desktop
Housing
Metal
Fanless
MAC address
8K
Jumbo frame
Number of QoS queues per port
4
Cable diagnostics
D-Link Green
802.3az Energy-Efficient Ethernet support
Specifications
Switching Fabric
Standards
- IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
- IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
- ANSI/IEEE 802.3 NWay auto-negotiation
- IEEE 802.3x Flow Control
- IEEE 802.1pQoS
- IEEE 802.3az Energy-Efficient Ethernet (EEE)
Protocol
Data Transfer Rates
- Ethernet:
- 10 Mbps (half duplex), 20 Mbps (full duplex)
- Fast Ethernet:
- 100 Mbps (half duplex), 200 Mbps (full duplex)
- Gigabit Ethernet:
Topology
Network Cables
- 10BASE-T:
- UTP CAT 3, 4, 5/5e (100 m max.)
- EIA/TIA-586 100-ohm STP (100 m max.)
- 100BASE-TX, 1000BASE-T:
- UTP CAT 5/5e (100 m max.)
- EIA/TIA-568 100-ohm STP (100 m max.)
Media Interface Exchange
- Auto MDI/MDIX adjustment for all ports
LED Indicators
- Per port: Link/Activity/Speed
- Per device: Power
Transmission Method
MAC Address Table
MAC Address Learning
Packet Filtering/Forwarding Rates
- Ethernet: 14,880 pps per port
- Fast Ethernet: 148,800 pps per port
- Gigabit Ethernet: 1,488,000 pps per port
RAM Buffer
Jumbo Frames
QoS
General Specifications
DC Input
- External 5V/1 A Level V Power Adapter
Power Consumption
- Power On (Standby):
- DC input: 0.5 watts
- AC input: 1.0 watts
- Maximum:
- DC input: 2.8 watts
- AC input: 4.5 watts
Heat Dissipation
- Power On (Standby) AC input: 3.41 BTU/h
- Maximum DC input: 9.548 BTU/h
MTBF
Operating Temperature
Storage Temperature
- -14 to 158 F (10 to 70 C)
Operating Humidity
- 10% to 90% RH non-condensing
Storage Humidity
- 5% to 90% RH non-condensing
Dimensions
- 6.3 x 4 x 1.1 inches(162 x 102 x 28 mm)
Weight
Certifications
- FCC Class B
- ICES-003 Class B
- CE Class B
- C-Tick Class B
- VCCI Class B
- cUL
- CB
Warranty
Warranty
Order Information
DGS-108
- 8-Port Unmanaged Gigabit Switch
Networking
