This kind of the Converter is an HDMI converter. It converts HDMI input into analog YPbPr video and R/L audio signal. It allows users to enjoy their high definition image and sound when watching movies or playing games on the traditional YPbPr monitors or projectors.
It offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
This HDMI converter has many features that enable it to perform in a superior manner. Among those features you will find:
- Easy to Use: Install in seconds, no need of setting.
- Conversion: It could convert complete HDMI into YPbPr video and R/L audio output.
- Supports HDCP 1.2
- Supports 165MHz/1.65Gbps per channel (6.75Gbps all channel) bandwidth for HDMI Input.
- Supports Analogue Video output up to UXGA and 1080p with 10-bit DAC
Package Contents
- Main unit.
- 5V DC Power Supply
- User's Manual
CONNECTION AND OPERATION
Before installation, please make sure all devices you wish to connect have been turned off.
1) Connect the HDMI input from source device to this Converter. (Input cables are optional)
2) Connect the YPbPr and R/L audio output of this product to the display device.
3) Insert the DC side of 5v power supply into this product and then connect the AC side of the power supply into the wall outlet.
4) Power on all connected devices, choose the input of the display device to its YPbPr channel.
5) The image does not need to be adjusted. This Converter will position it automatically.
Attention: Insert / Extract cable gently.
Note:The following two problems may existing when using this HDMI to YPbPr Converter
1. Some traditional CRT Displays may not work after connected with this Converter. This mainly caused by these Displays only supporting 480i and 576i YPbPr interlaced resolution. Therefore, we suggest to choose LCD Display or those can support YPbPr CRT Displays.
2. Some connected Displays may have no image after setting the resolution of HDMI source at 1080P. This not caused by our products but YPbPr Channel of Displays not supporting resolution at 1080P.