Size
|
132.44 x 68.03 x 11.25 mm
|
Weight
|
140 g
|
Display
|
4.5 inch, FWVGA
|
CPU Speed
|
1.3GHz quad-core CPUs
|
Platform Android
|
Android 4.2
HTC BlinkFeed
|
SIM Card Type
|
Regular SIM
|
Network1
|
2G/ 2.5G GSM/GPRS/EDGE:
3G - UMTS/ HSPA:
- 850/2100 MHz HSPA+ up to 21Mbps
|
Memory2
|
Total storage: 4GB, available capacity varies
RAM: 512 MB
Expansion card slot supports microSD memory card for up to 32GB additional storage (card not included)
|
GPS
|
Internal GPS antenna
|
Sensors
|
Accelerometer
|
Connectivity
|
- 3.5 mm stereo audio jack
- Bluetooth 4.0
- Wi-Fi : IEEE 802.11 b/g/n
|
Camera
|
- 5 MP camera with fixed focus
- 1080p Full HD video recording
- Front Camera: VGA
- Front Camera: VGA video recording
- Gallery with Video Highlights
|
Multimedia
|
Audio supported formats:
- Playback: .wav, .mp3, .xmf, .amr, aac .wma (Windows Media Audio 9)
- Recording: .amr, .aac
Video supported formats:
- Playback: .mp4, .wmv (Windows Media Video 9), H.263, H.264
- Recording: .mp4, H.263, H.264,
|
Battery3
|
Capacity: 2000 mAh
Removable rechargeable Li-polymer battery
Talk time:
Standby time:
|
AC Adaptor
|
Voltage range/frequency: 100 ~ 240 V AC, 50/60 Hz
DC output: 5 V and 1 A
|
- Network bands in regions may be different, depending on the mobile operator and your location. Upload and download speeds also depend on the mobile operator.
- Available storage is less due to phone software. Approximately 1.8 GB storage available for user content. Available storage is subject to change based on phone software updates and apps usage.
-
Battery times (talk time, standby time, and more) are subject to network and phone usage.
A Standby time specification ("specification") is an industry standard that is only intended to allow comparison of different mobile devices under the same circumstances. Power consumption in a standby state is strongly dependent on factors including but not limited to network, settings, location, movement, signal strength and cell traffic . Comparisons of different mobile devices using such a specification can therefore only be done in a controlled laboratory environment . When using any mobile device in real life circumstances for which the mobile device is intended, the standby time could be considerably lower and will be strongly dependent on the factors as mentioned above.
|