All stock codes associated to this product
WAP351AK9, WAP351-A-K9, NHCWAP351AK9, NHC-WAP351-A-K9, CS50006, 882658434860, 882658690266
CISCO (WAP351-A-K9) DUAL RADIO 802.11N ACCESS POINT WITH 5 PORT POE SWITCH (FCC)
WAP351-A-K9
|
Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (U.S., Canada, Mexico, Australia/New Zealand)
|
Improved Coverage, Easy to Deploy, Secure Business-Class Wireless-N Connectivity
Highlights
Provides cost-effective 802.11n connectivity for 2.4-GHz and 5-GHz clients
5-Port Gigabit Ethernet Switch for connecting multiple devices with PD/PSE support
PD port allows access point to be powered by backbone switch
Captive portal enables highly secure guest access with customized roles and rights
Single point setup requires no controller for easy, cost-effective deployment of multiple access points
Works right out of the box with easy installation and simple web-based configuration and wizard
Product Overview
As your employees become more mobile and collaborative, they need dependable, business-class access to network applications throughout the office. Extend secure, high-performance mobile networking to them and guests simply and cost-effectively with the Cisco® WAP351 Wireless-N Dual Radio Access Point. This flexible solution lets you connect dozens of employees, and can scale to accommodate additional users and changing business needs.
The Cisco WAP351 Wireless-N Dual Radio Access Point uses concurrent dual-band radios for improved coverage and user capacity. The 5-port Gigabit Ethernet switch allows more devices to be connected to the access point (AP) and allows the AP to be powered by the backbone switch, also helping reduce cabling and wiring costs. Intelligent quality-of-service (QoS) features let you prioritize bandwidth-sensitive traffic for voice-over-IP (VoIP) and video applications.
To provide secure guest access to visitors and other users, the Cisco WAP351 Wireless-N Dual Radio Access Point supports a captive portal with multiple authentication options and the ability to configure rights, roles, and bandwidth. A customized guest login page lets you present a welcome message and access details, and reinforces your brand with company logos.
Cisco WAP351 Wireless-N Dual Radio Access Points are easy to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. An attractive design with flexible mounting options enables the access points to smoothly blend into any small business environment.
To enhance reliability and safeguard sensitive business information, the Cisco WAP351 Wireless-N Dual Radio Access Point supports both Wi-Fi Protected Access (WPA) Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1 X RADIUS authentications help keep unauthorized users out.
Designed to scale smoothly as your organization grows, the access points feature controllerless Single Point Setup that simplifies the deployment of multiple access points without additional hardware. With the Cisco WAP351 Wireless-N Dual Radio Access Point, you can extend business-class wireless networking to employees and guests anywhere in the office, with the flexibility to meet new business needs for years to come.
Features
Concurrent dual-band radio supports up to 300 Mbps per radio to maximize capacity and coverage.
Single Point Setup, a controllerless technology, simplifies the deployment and management of multiple access points - without requiring additional hardware.
Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue-access-point detection, helps protect sensitive business information.
Captive portal enables highly secure, customized guest access with multiple rights and roles.
Simple installation and intuitive web-based configuration and wizard enable fast, simple deployment and setup in minutes.
5- Port Gigabit Ethernet LAN Switch supports both PD and PSE, allowing IP devices and the AP to be powered by a backbone switch.
Sleek design with multiple internal antennas and versatile mounting kit enables installation on a ceiling, wall, or desktop.
Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance.
Power-saving sleep mode and port control features help maximize energy efficiency.
Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network.
Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades.
Limited lifetime hardware warranty provides peace of mind.
Specifications
|
Description
|
Standards
|
IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
|
Cabling type
|
Category 5e or better
|
Antennas
|
Internal antennas optimized for installation on a wall or ceiling
|
LED indicators
|
Power, WLAN, LAN
|
Operating system
|
Linux
|
Physical Interfaces
|
Ports
|
5 10/100/1000 Ethernet, with support for 802.3af /at PoE, Power Port for AC adapter (not included)
|
Power Supply
|
802.3af/at PoE and External 48V/1.25A DC power adapter (not included)
|
Buttons
|
Reset button, Power On/Off
|
Lock slot
|
Slot for Kensington lock
|
Physical Specifications
|
Physical dimensions (W x D x H)
|
9.055 x 9.055 x 1.575 in. (230 x 230 x 40 mm)
|
Weight
|
1.34 lb or 0.607 kg
|
Network Capabilities
|
VLAN support
|
Yes
|
Number of VLANs
|
1 management VLAN plus 16 VLANs for SSIDs
|
802.1X supplicant
|
Yes
|
SSID-to-VLAN mapping
|
Yes
|
Auto channel selection
|
Yes
|
Spanning Tree
|
Yes
|
Load balancing
|
Yes
|
IPv6
|
Yes
IPv6 host support
IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
|
Layer 2
|
802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN
|
Security
|
WPA/WPA2
|
Yes, including Enterprise authentication
|
Access control
|
Yes, management access control list (ACL) plus MAC ACL
|
Secure management
|
HTTPS
|
SSID broadcast
|
Yes
|
Rogue-access-point detection
|
Yes
|
Mounting and Physical Security
|
Multiple mounting options
|
Mounting bracket included for easy ceiling or wall mounting
|
Physical security lock
|
Kensington lock slot
|
Quality of Service
|
Quality of service (QoS)
|
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS
|
Performance
|
Wireless throughput
|
Up to 300-Mbps data rate (real-world throughput will vary)
|
Recommended user support
|
32 active clients/users per radio
|
Multiple-Access Point Management
|
Single Point Setup
|
Yes
|
Number of access points per cluster
|
8
|
Active clients per cluster
|
240
|
Configuration
|
Web user interface
|
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
|
Management
|
Management protocols
|
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
|
Remote management
|
Yes
|
Event logging
|
Local, remote syslog, email alerts
|
Network diagnostics
|
Logging and packet capture
|
Web firmware upgrade
|
Firmware upgradable through web browser, imported/exported configuration file
|
Dynamic Host Configuration Protocol (DHCP)
|
DHCP client
|
IPv6 host
|
Yes
|
HTTP redirect
|
Yes
|
Wireless
|
Frequency
|
Dual concurrent radios (2.4 and 5 GHz)
|
Radio and modulation type
|
Dual radio, orthogonal frequency division multiplexing (OFDM)
|
WLAN
|
802.11n
2x3 multiple-input multiple-output (MIMO) with 2 spatial streams on 2.4 GHz
2x2 multiple-input multiple-output (MIMO) with 2 spatial streams on 5 GHz
20, and 40 MHz for 802.11n
PHY data rate up to 600 Mbps
|
Data rates supported
|
802.11a/b/g:
54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
802.11n: 6.5 to 300 Mbps
20-MHz bandwidth: MCS 0-15 for supported data rates
40-MHz bandwidth: MCS 0-15 for supported data rates
|
Frequency band and 20-MHz operating channels
|
A Regulatory Domain:
2.412 to 2.462 GHz; 11 channels
5.180 to 5.240 GHz; 4 channels
5.745 to 5.825 GHz; 5 channels
|
E Regulatory Domain:
2.412 to 2.472 GHz; 13 channels
5.180 to 5.240 GHz; 4 channels
C Regulatory Domain:
2.412 to 2.462 GHz; 11 channels
5.745 to 5.805 GHz; 4 channels
|
Nonoverlapping channels
|
2.4 GHz
802.11b/g
20 MHz: 3
802.11n
20 MHz: 3
5 GHz
802.11a
20 MHz: 9
802.11n
20 MHz: 9
40 MHz: 4
|
Wireless isolation
|
Wireless isolation between clients
|
External antennas
|
None
|
Internal antennas
|
Internal Fixed PiFA Antenna
|
Antenna gain in dBi
|
Maximum antenna gain of 5.3 dBi on 2.4 GHz
Maximum antenna gain of 5.1 dBi on 5 GHz
|
Wireless distribution system (WDS)
|
Yes
|
Roaming
|
802.11i only
|
Multiple SSIDs
|
16
|
Wireless VLAN map
|
Yes
|
WLAN security
|
Yes
|
Wi-Fi Multimedia (WMM)
|
Yes, with unscheduled automatic power save
|
Operating Modes
|
Access point
|
Access Point mode, WDS Bridging, Workgroup Bridge mode
|
Environmental
|
Power options
|
IEEE 802.3af/af Ethernet switch
Cisco Power Injector - SB-PWR-INJ2-xx
AC Adapter - SB-PWR-48V-xx (not included)
PoE power:
Peak PoE power: 18W
|
Compliance
|
Safety:
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
IEC 60950-1
EN 60950-1
Radio approvals:
FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
AS/NZS 4268.2003 (Australia and New Zealand)
EMI and susceptibility (Class B):
FCC Part 15.107 and 15.109
ICES-003 (Canada)
EN 301.489-1 and -17 (Europe)
|
Operating temperature
|
0 to 40C (32 to 104F)
|
Storage temperature
|
-20 to 70C (-4 to 158F)
|
Operating humidity
|
10% to 85% noncondensing
|
Storage humidity
|
5% to 90% noncondensing
|
System memory
|
128-MB RAM
128-MB Flash
|
Package Contents
|
CiscoWAP351 Wireless-N Dual Radio Access Point
Ceiling-/wall-mounting kit
User guide on CD-ROM
Quick-start guide
Ethernet network cable
|
Minimum Requirements
|
Switch or router with PoE support, PoE injector, or AC Power Adapter
Web-based configuration: Java-enabled web browser
|
Warranty
|
Access point
|
Limited lifetime
|
Table 2. Cisco WAP351 Wireless-N Access Point RF Performance Table
|
Maximum Transmit Power (dBm)
Per Chain
|
Receiver Sensitivity (dBm)
Per Chain
|
2.4 GHz 802.11b
|
1 Mbps
|
17.0 +/- 1.5
|
-91.0
|
11 Mbps
|
17.0 +/- 1.5
|
-89.0
|
2.4 GHz 802.11g
|
|
6 Mbps
|
17.0 +/- 1.5
|
-93.0
|
54 Mbps
|
15.0 +/- 1.5
|
-75.0
|
2.4 GHz 802.11n HT20
|
MCS0/8
|
17.0 +/- 1.5
|
-90.0
|
MCS7/15
|
14.0 +/- 1.5
|
-72.0
|
2.4 GHz 802.11n HT40
|
MCS0/8
|
15.0 +/- 1.5
|
-88.0
|
MCS7/15
|
13.0 +/- 1.5
|
-69.0
|
5 GHz 802.11a
|
6 Mbps
|
17.0 +/- 1.5
|
-91.0
|
54 Mbps
|
13.0 +/- 1.5
|
-73.0
|
5 GHz 802.11n HT20
|
MCS0/8
|
16.0 +/- 1.5
|
-89.0
|
MCS7/15
|
12.0 +/- 1.5
|
-71.0
|
5 GHz 802.11n HT40
|
MCS0/8
|
14.0 +/- 1.5
|
-86.0
|
MCS7/15
|
11.0 +/- 1.5
|
-67.0
|
|
|
|
|
Note: This table shows the maximum capability of the hardware. The transmit power may be reduced to comply with local regulatory requirements.
Ordering Information
Table 3 gives ordering information for the Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch.
Table 3. Ordering Table
Part Number
|
Description
|
WAP351
|
Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch
|
WAP351-A-K9
|
Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (U.S., Canada, Mexico, Australia/New Zealand)
|
WAP351-C-K9
|
Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (China)
|
WAP351-E-K9
|
Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (ETSI)
|
SB-PWR-48V-xx
|
Cisco 48V Power Adapter
|
SB-PWR-INJ2-xx
|
Cisco Gigabit Power over Ethernet Injector-30W
|