HX426C13SB2K2/8 | Kingston 8GB (2 x 4GB) PC4-21300 2666MHz DDR4 RAM - CL13

HX426C13SB2K2/8

8GB (4GB 512M x 64-Bit x 2 pcs.)

DDR4-2666 CL13 288-Pin DIMM Kit  

Description

HyperX HX426C13SB2K2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2666 CL13 SDRAM (Synchronous DRAM) 1Rx8, memory modules, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 8GB. Each module supports Intel® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2666 at a low latency timing of 13-15-15 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

XMP TIMING PARAMETERS
 
JEDEC: DDR4-2133 CL15-15-15 @1.2V
XMP Profile #1: DDR4-2666 CL13-15-15 @1.35V
XMP Profile #2: DDR4-2400 CL13-14-14 @1.35V

Features

Power Supply: VDD = 1.2V Typical

VDDQ = 1.2V Typical

VPP - 2.5V Typical

VDDSPD = 2.25V to 3.6V

On-Die termination (ODT)

16 internal banks; 4 groups of 4 banks each

Bi-Directional Differential Data Strobe

8 bit pre-fetch

Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

Height 1.36� (34.57mm)

Specifications

CL(IDD): 15 Cycles
Row Cycle Time (tRCmin): 46.5ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin): 260ns (min.)
Row Active Time (tRASmin): 33ns (min.)
Maximum Operating Power: TBD W*
UL Rating: 94 V - 0
Operating Temperature; 0C to +85C
Storage Temperature: -55C to +100C