All stock codes associated to this product
KVR21R15D8K4/32I
32GB (8GB 2Rx8 1G x 72-Bit x 4 pcs.) PC4-2133
CL15 Registered w/Parity 288-Pin DIMM Kit
Description
ValueRAM's KVR21R15D8K4/32 is a kit of four 1G x 72-bit (8GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM) registered w/ parity, 2Rx8, ECC, Intel® Compatibility Tested, memory module, based on eighteen 512M x 8-bit FBGA components per module. Total kit capacity is 32GB. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Features
Power Supply: VDD=1.2V (1.14V to 1.26V)
VDDQ = 1.2V (1.14V to 1.26V)
VPP - 2.5V (2.375V to 2.75V)
VDDSPD=2.25V to 2.75V
Functionality and operations comply with the DDR4 SDRAM datasheet
16 internal banks
Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks in the same or different bank group accesses are available
Data transfer rates: PC4-2133, PC4-1866, PC4-1600
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Supports ECC error correction and detection
On-Die Termination (ODT)
Temperature sensor with integrated SPD
This product is in compliance with the RoHS directive.
Per DRAM Addressability is supported
Internal Vref DQ level generation is available
Write CRC is supported at all speed grades
CA parity (Command/Address Parity) mode is supported
Specifications
CL(IDD): 15 Cycles
Row Cycle Time (tRCmin): 47.05ns(min.)
Refresh to Active/Refresh Command Time 1x mode (tRFCmin): 260ns (min.)
Row Active Time (tRASmin): 33.00ns(min.)
Maximum Operating Power: TBD W*
UL Rating: 94V - 0
Operating Temperature: 0C to +85C
Storage Temperature: -55C to +100C
