All stock codes associated to this product
T1700G28TQ, T1700G-28TQ, 6935364094560
Overview
-
True
physical stacking supports up to 6 units and 40Gbps bi-directional bandwidth
for high scalability and efficient redundancy
-
10G
SFP+ ports for stacking and/or uplink, providing support for high-bandwidth
applications for congestion relief and smooth data delivery
-
L2+
feature, Static Routing help route internal traffic for more efficient use of
network resources
-
Advanced
security features include IP-MAC-Port Binding, ACL, Port Security, DoS Defend,
Storm Control, DHCP Snooping, 802.1X, and Radius Authentication
-
IPv6
support provides dual IPv4/IPv6 stacking, MLD snooping, and IPv6 neighbor
discovery
-
WEB/CLI
managed modes, SNMP, RMON, and Dual Image enhance management
Affordable 10-Gigabit Switching Solution for Growing SMBs - JetStream
T1700 Series 10G Smart Switches
In a world of expanding enterprises and growing virtualization, cloud-based
services and applications, like VoIP, HD streaming video, and IP surveillance,
SMB networks need to evolve beyond simple reliability to provide increased
scalability, higher bandwidth, and enhanced performance. TP-LINKs new T1700
Series 10G Smart Switches represent an ideal solution that meets these
requirements. The series includes the T1700X-16TS Full 10-Gigabit Smart Switch
and the T1700G-28TQ Gigabit Stackable Smart Switch with 10G Uplink, which both
provide high levels of performance, scalability, and cost-effectiveness that
SMBs require from their 10G networking solutions.
GIGABIT STACKABLE WITH 10G UPLINK
JetStrem 24-Port Gigabit Stackable Smart Switch with 4 10GE SFP+ Slots.
Physical Stacking
With True Physical Stacking Technology, up to six T1700G-28TQ units can be
stacked with a single IP address. This provides enhanced scalability, simple
management, and increased redundancy for high-density deployment. It also
supports efficient network expansion in the future.
6 Units
- True Physical Stacking
- Technology of up to six units
- supports network simplification
144 GE Ports
- Up to 144 Gigabit Ethernet ports per stack
24 10G SFP+
- Up to 24 10G SFP+ slots per stack
768 Gbps
- Up to 768Gbps of switching capacity for aggregated networks
1 Management IP
- With all units identified by a single IP address, configuring and
monitoring the stack is easy
Fanless Design for Silent Operation
The T1700G-28TQ utilizes a fanless design, which reduces the amount of
ambient noise in your office. Removing the fan also reduces power consumption
and helps you build a more cost-effective network.
Software Features
L2+ Static Routing
- Simple network segmentation, with internal routing through the switch,
allows devices in different VLANs/subnets to communicate with each other and
makes the flow of network traffic more efficient.
Abundant L2 Features
T1700 Series devices are equipped with a full lineup of L2 features that meet
your current and future needs for unified networking and mobility.
- 802.1Q/MAC/Protocol/Private VLAN1
- Link Aggregation Group (LAG)
- IGMP & MLD Snooping
- Multicast VLAN
Robust Security Strategies
Support for numerous security strategies allow you to create a secure,
unified network by preventing unauthorized access, external attacks, and malware
infiltration.
- Access Control List (ACL)
- DHCP Snooping
- 802.1x Authentication
- IP-MAC-Port Binding
Comprehensive QoS Features
Advanced controls provide optimized network performance and efficient
delivery of time-sensitive traffic.
- Port-Based or 802.1p-Based Prioritization
- Layer 3-Based (DSCP) Prioritization
- Rate Limit
- Voice VLAN
IPv6 Support
- The T1700 Series offers comprehensive IPv6 features, including IPv6
management, Static Routing, ACL, and QoS2, which ease the transition to an
IPv6-based network and protect the value of your investment.
Dual Image
- Dual image firmware reduces downtime when the firmware is being updated.
The backup image will also be activated in the event that any error occurs on
the active image.
1 Only T1700X-16TS supports Private VLAN
2 IPv6 Static Routing/ACL/QoS will be supported in a future
firmware release
HARDWARE SPECIFICATIONS
|
10/100/1000Mbps RJ45
Ports |
24 |
|
10GBase-T RJ45
Ports |
- |
|
Uplink |
4 Dedicated 10G
SFP+ |
|
Switching
Capacity |
128Gbps |
|
Dimensions(WDH) |
17.37.11.73 in.
(44018044mm) |
|
Fan
Quatity |
Fanless |
Features
|
Physical
Stacking |
Up to 6 units Physical
Stacking |
|
Up to 40Gbps
bi-directional stacking bandwidth |
|
Ring Stacking for Link
Redundancy |
|
Distributed Link
Aggregation |
|
|
|
L2 and L2+
Features |
Static
Routing |
|
Link Aggregation
Control Protocol (LACP) |
|
802.1Q/MAC/Protocol
VLAN |
|
STP/RSTP/MSTP |
|
IGMP
Snooping |
|
|
|
Security
Strategies |
Port
Security |
|
Access Control List
(L2~L4 ACL) |
|
DHCP
Snooping |
|
IP-MAC-Port
Binding |
|
802.1x and Radius
Authentication |
|
SSL and SSH
encryptions |
|
Strom
Control |
|
Dos
Defend |
|
|
|
Quality of
Service |
8 priority
queues |
|
802.1P/DSCP
QoS |
|
Rate
Limit |
|
Voice
VLAN |
|
|
|
Management |
Web-based
GUI |
|
Command Line Interface
(through Telnet) |
|
SNMP
v1/v2c/v3 |
|
RMON (1, 2, 3, 9
group) |
|
IPv6
Management |
|
Dual
Image |
Specifications
|
HARDWARE
FEATURES |
|
Standards and
Protocols |
IEEE 802.3i, IEEE
802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.3x,
IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE
802.1p |
|
Interface |
24 10/100/1000Mbps RJ45
Ports |
|
4 fixed 10G SFP+
Slots |
|
Network
Media |
10BASE-T: UTP category
3, 4, 5 cable (maximum 100m) |
|
100BASE-TX/1000Base-T:
UTP category 5, 5e or above cable (maximum 100m) |
|
1000BASE-X: MMF,
SMF |
|
10GBASE-LR |
|
10GBASE-SR |
|
Fan
Quantity |
Fanless |
|
Power
Supply |
100-240V,
50/60Hz |
|
Power
Consumption |
21.8W |
|
Weight |
2.8kg |
|
Dimensions ( W x D x H
) |
17.32 * 7.1 * 1.73 in.
(440 * 180 * 44 mm) |
|
|
|
PHYSICAL
STACKING |
|
Installable SFP+
Transceivers and Direct Attach Copper (DAC) Cables |
TXM431-SR |
|
TXM432-LR |
|
TXC432-CU1M |
|
TXC432-CU3M |
|
Max Number of Stacking
Ports Installable |
2
SFP+ |
|
No. of Units Per
Stack |
Up to 6
units |
|
Stacking Speed (Per
Port) |
20Gbps
(Full-Duplex) |
|
|
|
PERFORMANCE |
|
Switching
Capacity |
Up to 128Gbps for a
standalone switch |
|
Packet Forwarding
Rate |
Up to 95.2Mpps for a
standalone switch |
|
MAC Address
Table |
16K |
|
Packet Buffer
Memory |
1.5MB |
|
Jumbo
Frame |
9KB |
|
Number of Static
Routes |
32
IPv4 |
|
Number of IP
Interfaces |
16 |
|
|
|
SOFTWARE
FEATURES |
|
Quality of
Service |
Support 802.1p CoS/DSCP
priority |
|
Support 8 priority
queues |
|
Queue scheduling: SP,
WRR, SP+WRR |
|
Port/Flow- based Rate
Limiting |
|
IPv6
QoS* |
|
Voice
VLAN |
|
L2 and L2+
Features |
Static
Routing |
|
DHCP
Relay* |
|
IGMP Snooping
V1/V2/V3 |
|
802.3ad LACP (Up to 14
aggregation groups, containing 8 ports per group) |
|
Spanning Tree
STP/RSTP/MSTP |
|
BPDU
Filtering/Guard |
|
TC/Root
Protect |
|
Loopback
detection |
|
802.3x Flow
Control |
|
LLDP,
LLDP-MED* |
|
VLAN |
Supports up to 4K VLANs
simultaneously (out of 4K VLAN IDs) |
|
MAC/Protocol-based
VLAN |
|
Access Control
List |
L2L4
package filtering based on source and destination MAC address, IP address,
TCP/UDP ports |
|
IPv6
ACL* |
|
Security |
AAA* |
|
Port
Security |
|
DHCP
Snooping |
|
IP-MAC-Port
Binding |
|
ARP
Inspection |
|
802.1x and Radius
Authentication |
|
SSH
v1/v2 |
|
SSL
v3/TLSv1 |
|
Broadcast/Multicast/Unknown-unicast
Storm Control |
|
Dos
Defend |
|
IPv6 |
Dual IPv4/IPv6
stack |
|
Multicast Listener
Discovery (MLD) Snooping |
|
IPv6 neighbor discovery
(ND) |
|
Path maximum
transmission unit (MTU) discovery |
|
Internet Control
Message Protocol (ICMP) version 6 |
|
TCPv6/UDPv6 |
|
IPv6
Applications |
DHCPv6
Client |
|
Ping6 |
|
Tracert6 |
|
Telnet
(v6) |
|
IPv6
SNMP |
|
IPv6
SSH |
|
IPv6
SSL |
|
Http/Https |
|
IPv6
TFTP |
|
Management |
Web-based GUI and CLI
management |
|
SNMP
v1/v2c/v3,compatible with public MIBs and |
|
TP-LINK private
MIBs |
|
RMON (1, 2, 3, 9
groups) |
|
CPU
Monitoring |
|
Port
Mirroring |
|
Firmware Upgrade: TFTP
& Web |
|
System Diagnose:
VCT |
|
SYSLOG & Public
MIBS |
|
Dual
Image |
|
*These features will be
supported in a future firmware release. |
|
|
|
OTHERS |
|
Certification |
CE, FCC,
RoHS |
|
Package
Contents |
T1700G-28TQ |
|
Power
Cord |
|
Installation
Guide |
|
Resource
CD |
|
Rackmount
Kit |
|
Rubber
Feet |
|
System
Requirements |
Microsoft Windows XP,
Vista or Windows 7, Windows 8/8.1, MAC OS, NetWare, UNIX or
Linux. |
|
Environment |
Operating Temperature:
0~40
(32~104); |
|
Storage Temperature:
-40~70
(-40~158) |
|
Operating Humidity:
10%~90%RH non-condensing |
|
Storage Humidity:
5%~90%RH
non-condensing |
Networking
