All stock codes associated to this product
USB2311C, SUNUSB2311C, SUN-USB2311C, USSUNUSB2311CNC, USSUN-USB2311C-NC, 4715109710441
Overview
Super-Speed plus USB3.1 Type-C is the next
revolution in I/O interconnect standards that will deliver the bandwidth and
features required by PCs, consumer electronics and portable devices. With better
performance, small form factor, high power capacity feature, Super-Speed plus
USB3.1 Type-C interface will be the trendy of IT technology.
SUNIX USB2311C
is a single-port Super-Speed USB3.1 PCI Express card, and its compliant with the
PCI Express Generation 3 specification for host PC system. Based on USB Type-C
pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer
when connecting to USB 3.1 compliant peripherals, while maintaining
compatibility with existing USB peripheral devices. USB3.1 performance is 2
times faster than USB3.0 and 20 times faster than USB2.0 connectivity.
With USB Type-C Receptacle, SUNIX USB2311C
sports reversible plug orientation and cable direction, which means that users
will no longer need to be concerned with plug orientation/cable direction,
making it easier to plug in. The new connector is smaller and thinner design,
but drive higher power output capacity to USB device. SUNIX USB2311C supports
5VDC@3000mA power output to USB device with over current protection on each USB
port. This card is an ideal choice for external storage devices, digital
cameras, webcam, video devices, and all other USB electronic
devices.
Features
-
PCI Express Base Specification Revision 3.0 single-lane
( x1).
-
Compliant with Universal Serial Bus 3.1 specification
Gen2.
-
Compliant with xHCI (eXtensible Host Controller
Interface) specifications Revision 1.1.
-
Supports simultaneous operation of multiple USB 3.1,
3.0, USB 2.0 and USB 1.1 devices.
-
Supports USB data transfer rate of 10G/5G/480/12/1.5
Mbps.
-
Expands single external USB3.1 Super-Speed plus Type-C
port (DFP) on the system.
-
USB port supplies maximum +5VDC / 3000mA power output
to USB device.
-
Built-in over current protection on each USB
port.
-
Support device remote wakeup function from USB keyboard
or mouse.
-
Hot-swapping feature allows connect/disconnect device
without powering down the system.
-
Driver supports for Microsoft Windows 7, 8.x and 10
operation systems.
-
Certified by Electromagnetic Compatibility (CE, FCC,
VCCI, C-Tick, BSMI) and RoHS approval.
Specification
Hardware
BUS |
PCI Express Spec 3.0,
Single-Lane (x1) |
Controller |
PCI Express USB3.1
Host controller, Asmedia ASM1142 |
USB Standard |
eXtensible Host
Controller Interface (xHCI)Rev1.1 |
IRQ & IO |
Assigned by
System |
USB
Communication
Interface |
Universal Serial Bus 3.1 / 3.0 / 2.0
/ 1.1 |
Speed |
Super Speed+ (10Gpbs), Super Speed
(5Gpbs), High Speed (480Mbps), Full Speed (12Mbps), Low Speed
(1.5Mbps) |
No. of Port |
1-port |
PCB Connector |
USB3.1 USB Type-C port (Downstream
Facing Port) |
Protection |
15KV IEC61000-4-2 Air Gap
Discharge 8KV IEC61000-4-2 Contact
Discharge |
Power
Source |
+5VDC / SATA Power Connector
Type |
Output Capacity |
USB Type-C Port: +5VDC / Maximum 3.0A
/ each port Note: Total power output
capacity will be limited by system power supply. |
Over Current
Protection |
USB Type-C Port: +5VDC / Maximum 3.7A
/ each port |
Power Consumption |
1.1 W @ 3.3V (board only without
power output to USB device) |
Driver Support
Windows |
Windows 7 (X86/X64) Windows 8.x / 10 (X86/X64) (Windows in-box
driver) |
Linux |
Linux 2.6.31 or later (Linux OS
already implemented USB3.0 driver) |
Environment
Operation
Temperature |
0 to 60C (32 to 140F) |
Operation Humidity |
5 to 95% RH |
Storage Temperature |
-20 to 70C (-4 to
158F) |
Regulatory Approvals
EMC |
EUR: CE, EN55022 Class B, EN55024,
EN61000-3-2, EN61000-3-3 US: FCC Part 15
Class B TAIWAN: BSMI: CNS13438 AS/NZS: C-Tick: CISPR22 JAPAN: VCCI |
Green |
RoHS, CRoHS,
WEEE |
Physical Characteristics
PCB
Dimension |
65.7 x 68.5 mm |
Bracket |
Standard 120 mm (Low Profile
80mm) |
Bracket Space |
1 |