All stock codes associated to this product
DV2860AC, MODDV2860AC, MOD-DV2860AC, 4716779077995
Overview
- ADSL2+/VDSL2, Gigabit Ethernet WAN port, Dual USB ports for failover and
load-balancing
- Two USB ports for connection to Two 3.5G/4G LTE USB mobiles, FTP server
and network printer
- 6 x Gigabit LAN ports with multiple subnets
- Object-based SPI Firewall and CSM (Content Security Management) for
network security
- VLAN for secure and efficient workgroup management
- 32 VPN tunnels with comprehensive secure protocols
- VPN load-balancing and backup for site-to-site applications
- Integrated with IEEE 802.11ac wireless access point
- Embedded Central VPN Management for 8 remote Vigor routers
- Embedded Central AP Management for multi-deployed Vigor wireless access
points
- Working with Smart Monitor Network Traffic Analyzer (30-nodes)
- Working with VigorACS SI Central Management for multi-site
deployment
Vigor2860 Combo WAN Router series are designed with the IPv6 ready
ADSL2+/VDSL2 WAN, One Gigabit Ethernet WANs and Dual USB WANs. The product range
is from Vigor2860, Vigor2860n, Vigor2860n plus, Vigor2860Vn plus, Vigor2860ac,
and Vigor2860Vac
It ensures the business continuity for today and the future IPv6 network. Its
ADSL2/VDSL2 WAN can let you connect ADSL2/2+ or VDSL2 line. Its gigabit Ethernet
WAN port can accept various high-speed Ethernet-based WAN links via
FTTx/xDSL/Cable. The two USB ports are for 3.5G/4G LTE mobile broadband access.
With the multi-WAN accesses, Vigor2860 series routers provides flexible and
reliable broadband connectivity for the small business office. The VPN backup
and VPN load balancing assures business continuity via multi-WAN connection to
the Internet. The bandwidth management, Quality of Service, VLAN for flexible
workgroup management, User Management for authentication, Route Policy, Central
VPN Management, Central AP Management and Firewall serve your daily office
network to bring in more business opportunities. The firmware version 3.8.0 will
allow Multi WAN/ Multi LAN to support IPv6 in order to let network administrator
easily set up more IP-based applications.
The Gigabit Ethernet WAN port for failover and
load-balancing
The Gigabit Ethernet WAN port caters for any type of Internet access,
including FTTx, xDSL and Cable fitting your local infrastructure. You can then
use both WAN 1 (ADSL2+/VDSL2) and WAN 2 for failover, ensuring that you will
always have an access to the Internet even if one of the WAN fails, or for
load-balancing so the 2 WANs share Internet traffic requirements of your
organization
Two USB 2.0 ports for 3.5G/4G LTE USB mobiles, FTP drive and network
printer
The two USB ports can be used for the connection of 3G/4G LTE USB mobiles
mobile, FTP drive and network printers. A 3.5G/4G USB mobile connected to one of
the 2 USB ports can be used as a second WAN. The two USB ports can work as Dual
USB WAN ports when you connect two USB mobiles to the USB ports. The USB WAN
interface can also be the primary access if the local fixed line service hasn't
been deployed yet. You can have two 3.5G/4G USB mobiles connected to the USB
ports, and assign one of these (WAN 3) to be the primary access and the other
(WAN 4) as the fail-over back-up. And, you have the flexibility to convert back
to fixed line services when these become available
The Vigor2860 series provide you with FTP access file uploading/downloading,
which can be used from the local LAN or from anywhere on the Internet. The
access can be using "username and password" or "public". Each of them can have
their own directories and/or file access rights. If your office network requires
printer, you can connect one network printer to one of the two USB ports.
DrayTek IPv6 solutions
We support Dual Stack (PPP, DHCPv6 Client, Static IPv6, 6rd) and Tunnel Mode
(TSPC, AICCU, 6in4 static-tunnel) to let your business operation successfully be
migrated to the era of IPv6
Because the IPv4 addresses are limited and IPv6 allows for a larger address
space and much more efficient routing. The Vigor2860 series support IPv6 and
IPv4. The Vigor2860 series can support IPv6 broker/tunnel services to provide
IPv6 access using either AICCU or TSPC via 3rd party IPv6 providers if your ISP
does not support IPv6 yet.
- Can be run on any one of the WAN ports (ADSL/VDSL2, Ethernet or 3G; but
the USB WAN port can run AICCU/TSPC tunnel mode only)
- Can connect to direct native IPv6 ISPs
- Can build tunnel to 3rd party IPv6 brokers using either AICCU or TSPC
methods
- Default stateful firewall for all IPv6 LAN clients/ devices
- DHCPv6 Client
- Static IPv6 Client
- DHCPv6 & RADVD (Router Advertisement Server) for client configuration
- QoS for IPv6 with DiffServ
- IP Filtering Rules
- Router Management over IPv6 (Telnet/HTTP) with IPv6 access list
- Concurrent operation with IPv4 ("Dual-Stack")
- Other router features are only available on IPv4
Secured Networking
DrayTek Vigor2860 series inherited versatile firewall mechanism from previous
Vigor series routers. The firewall allows setting of Call/Data Filters and
DoS/DDoS prevention, whereas the CSM covers IM/P2P/Protocol filter, URL Content
Filter and Web Content Filter. The object-based design used in SPI (Stateful
Packet Inspection) firewall allows users to set firewall policy with ease. The
object-based firewall is flexible and allows your network be safe. With Objects
settings, you can pre-define objects or groups for IP, service type, keyword,
file extension, etc., and mix these with the Time Scheduler or the VLAN groups
as required. Altogether this gives you peace of mind whether you are guarding a
complicated network or a small office. The DoS/DDoS prevention and URL/Web
content filter strengthen the security outside and control inside. The
enterprise-level CSM (Content Security Management) enables users to control and
manage IM (Instant Messenger) and P2P (Peer-to-Peer) applications more
efficiently. The CSM hence prevents inappropriate content from distracting
employees and impeding productivity. Furthermore, the CSM can keep office
networks threat-free and available.
By adoption of the world-leading Cyren GlobalView Web Content Filtering, you
can block whole categories of web sites (e.g. sports, online shopping), subject
to an annual subscription to the Cyren GlobalView WCF, which is timely updated
with changed or new site categorizations. A free 30-day trial can be activated
via activation wizard of Vigor2860 series routers' web user interface
The "User Management" implemented on your router firmware can allow you to
prevent any computer from accessing your Internet connection without a username
or password. You can set scheduler or maximum usage time to your employees
within office network. The user accounts can also be restricted by any other
aspect of the firewall rule on a user-by-user basis
The Vigor2860 series support DrayTek's SmartMonitor network traffic analyzer
(up to 30 nodes), which captures actual live data of activities in your managed
network. You can track specified files download/upload or view statistics on
data type activities to realize what corporate related information have been
released accidentally or on purpose
Multi-subnets(Multiple Private LAN Subnets)
With the 6-port Gigabit switch on the LAN side, the Gigabit LAN switch
provides extremely high speed connectivity for the highest speed local data
transfer of any server or local PCs. The tagged VLANs (802.1q) can mark data
with a VLAN identifier. This identifier can be carried through on onward
Ethernet switch to specific ports. The specific VLAN clients can also pick up
this identifier as it is just passed to the LAN. You can set the priorities for
LAN-side QoS. You can assign each of VLANs to each of the different IP subnets
that the router may also be operating, to provide even more isolation. The said
functionality is tag-based multi-subnet. On the wireless-quipped models
(Vigor2860n/Vigor2860n plus/Vigor2860Vn plus/Vigor2860ac/Vigor2860Vac) each of
the wireless SSIDs can also be grouped within one of the VLANs.
With multi-subnet, the traffic can be sent through non-NAT mode with higher
performance. If you deploy Vigor2860 series with MPLS network with your main
office, the multi-subnet settings will let your data transactions be carried out
without NAT.
Comprehensive VPN
For remote teleworkers and inter-office links, Vigor2860 series provide up to
32 simultaneous VPN tunnels (such as IPSec/PPTP/L2TP protocols) for secure data
exchange and communication. With a dedicated VPN co-processor, the hardware
encryption of AES/DES/3DES and hardware key hash of SHA-1/MD5 are seamlessly
handled, thus maintaining maximum router performance. Teleworkers can be
authenticated directly with your LDAP server if preferred. The Vigor2860 series
are equipped with ADSL2+/VDSL2 and one Gigabit Ethernet port and two USB WAN
ports for WAN load-balancing and backup. The VPN trunking (VPN load-balancing
and VPN backup) are hence implemented on Vigor2860 series. With VPN trunking,
you can create multiple WAN connections to a remote site in order to increase
bandwidth. The VPN trunking also can allow you to have failover (backup) of VPN
route through a secondary WAN connection
With SSL VPN, Vigor2860 series let teleworkers have convenient and simple
remote access to central site VPN. The teleworkers do not need to install any
VPN software manually. From regular web browser, you can establish VPN
connection back to your main office even in a guest network or web cafe. The SSL
technology is same as the encryption that you use for secure web sites such as
your online bank. The SSL VPNs can be operated in either full tunnel mode or
Proxy mode
For client-to-site, remote dial-in users can use up-to 16 SSL VPN tunnels to
avoid the local network infrastructure limitation, there are 64 profiles on WUI,
but it only allows 16 concurrent tunnels.
Centralized Management
With F/W 3.7.4, the embedded Central VPN Management (CVM) will let network
administrator register up to 16 remote routers but run concurrent remote
management over 8 remote routers
Concurrent dual-band 802.11ac WLAN (2.4/5GHz frequency)
Vigor2860n plus and Vigor2860Vn plus have a built-in IEEE 802.11n WLAN with
concurrent dual-band (2.4G/5G). They can allow the essential applications to use
the less interference band (e.g. 5G). The Wi-Fi access is also protected by
security and encryption protocols, including WEP/WPA/WPA2, MAC Address Control,
Multiple SSID, Wireless LAN Isolation, Wireless VLAN* and 802.1x
Authentication.
The Vigor2860ac and Vigor2860Vac are equipped with IEEE 802.11ac wireless
access point which can run 300Mbps @ 2.4GHz and 1300 Mbps @5GHz 11ac
The Wireless Rate Control function allows connection rates for each network
device to be individually managed as required. The WMM (Wi-Fi Multi-Media)*
function allows setting of priority levels for various applications: voice,
video, data, etc., so time-critical applications can be assigned higher priority
levels. Furthermore, WDS (Wireless Distribution System) function allows you to
extend the wireless coverage distance easily
Central AP Management
APM provides the 3-step installation, plug-plug-press, and then wireless
clients are able to enjoy surfing internet. Moreover, through the unified user
interface of Draytek routers, the status of APs is clear at the first sight
If your network requires several VigorAP900 or VigorAP 810 units, to
centrally manage and monitor them individually as a group will be expected.
DrayTek central wireless management (AP Management) lets control, efficiency,
monitoring and security of your company-wide wireless access easier be managed.
Inside the web user interface, we call "central wireless management" as Central
AP Management which supports mobility, client monitoring/reporting and
load-balancing to multiple APs. For central wireless management, you will need a
Vigor2860 or Vigor2925 series router; there is no per-node licensing or
subscription required. For multiple wireless clients, to apply the AP Load
Balancing to the multiple APs will manage wireless traffic with smooth flow and
enhanced efficiency.
Flexible Network Management
Like all DrayTek routers, Vigor2860 Series routers support comprehensive
network management functions. For example, you can set username/password and
directory/file access privilege for individual users as required. There are also
routing/network tables, system log, debugging utilities, etc., making network
administrators' jobs easy
Other management features include SNMP, TR-069 and TR-104. TR-069 can be
utilized with DrayTek's VigorACS SI management software to remotely monitor and
manage the Vigor2860 series
- VDSL2/ADSL2/2+
- ITU-T G.993.2 (VDSL2)
- ITU-T G.992.1/3/5 (ADSL1/2/2+) Annex A & Annex B
- DSL Forum Performance Specication: ADSL TR-048/67, TR-100; VDSL:
WT-114
- Erasure Decoding, Increased Interleaver Depth and Re-transmission
- EFM (IEEE 802.3 ah)
- VDSL2 Profile: up to 30a
- WAN Protocol
- DSL (WAN-1)/Giga Ethernet (WAN-2)
- DHCP Client
- Static IP
- PPPoE
- PPTP / L2TP (WAN-2 only)
- PPPoA (ADSL2 only)
- 802.1q Multi-VLAN Tagging
- USB (WAN-3)
- IPv6
- Tunnel Mode: TSPC, AICCU, 6rd, Static 6in4
- Dual Stack: PPP, DHCPv6 Client, Static IPv6
- USB
- 3.5G (HSDPA) as WAN
- Printer Sharing
- File System :
- Support FAT32 File System
- Support FTP Function for File Sharing
- Support Samba for File Sharing
- LTE USB mobile Support List Please Contact
[email protected]
- VPN
- Up to 32 VPN Tunnels
- Protocol : PPTP, IPsec, L2TP, L2TP over IPsec
- Encryption : MPPE and Hardware-based AES/DES/3DES
- Authentication : MD5, SHA-1
- IKE Authentication : Pre-shared Key and Digital Signature (X.509)
- LAN-to-LAN, Teleworker-to-LAN
- DHCP over IPsec
- IPsec NAT-traversal (NAT-T)
- Dead Peer Detection (DPD)
- VPN Pass-through
- VPN Wizard
- mOTP
- SSL VPN: 16 Tunnels
- VPN Trunk (Load Balance/Backup)
- Multi-WAN
- Load-Balance/Route Policy(The VDSL2/ADSL2+ interface, Gigabit Ethernet
interface and USB mobile can be used either for WAN-backup or load
balancing.)
- WAN Connection Failover
- CSM (Content Security Management)
- IM/P2P Application
- GlobalView Web Content Filter (Powered by )
- URL Content Filter :
- URL Keyword Blocking (Whitelist and Blacklist)
- Java Applet, Cookies, Active X, Compressed, Executable, Multimedia
File Blocking
- Excepting Subnets
- Bandwidth Management
- QoS
- Guarantee Bandwidth for VoIP
- Class-based Bandwidth Guarantee by User-defined Traffic
Categories
- DiffServ Code Point Classifying
- 4-level Priority for Each Direction (Inbound/Outbound)
- Bandwidth Borrowed
- Bandwidth/Session Limitation
- Layer-2 (802.1p) and Layer-3 (TOS/DSCP) QoS Mapping
- Network Feature
- Packet Forwarding Acceleration *
- DHCP Client/Relay/Server
- IGMP Snooping/Proxy V2 and V3
- Triple-Play Application
- Dynamic DNS
- NTP Client
- Call Scheduling
- RADIUS Client
- DNS Cache/Proxy and LAN DNS
- UPnP 30 sessions
- Multiple Subnets
- Port-based/Tag-based VLAN (802.1q)
- Routing Protocol:
- Network Management
- Web-based User Interface (HTTP/HTTPS)
- Quick Start Wizard
- CLI (Command Line Interface, Telnet/SSH)
- Administration Access Control
- Configuration Backup/Restore
- Built-in Diagnostic Function
- Firmware Upgrade via TFTP/FTP/HTTP/TR-069
- Logging via Syslog
- SNMP Management MIB-II
- Management Session Time Out
- 2-level Management (Admin/User Mode)
- TR-069
- TR-104
- LAN Port Monitoring
- Support Smart Monitor (30 nodes)
- Central AP Management
- Central VPN Management (Up to 8 Remote Routers)
- Firewall
- Multi-NAT, DMZ Host, Port-redirection and Open Port
- Object-based Firewall, Object IPv6, Group IPv6
- MAC Address Filter
- SPI (Stateful Packet Inspection) (Flow Track)
- DoS/DDoS Prevention
- IP Address Anti-spoofing
- E-mail Alert and Logging via Syslog
- Bind IP to MAC Address
- Time Schedule Control
- User Management
- Wireless AP
- 802.11ac WLAN with Concurrent 2.4/5 GHz Frequency
- Wireless Client List
- Wireless LAN Isolation
- 64/128-bit WEP
- WPA/WPA2
- Wireless Wizard
- Hidden SSID
- WPS
- MAC Address Access Control
- Access Point Discovery
- WDS (Wireless Distribution System)
- 802.1x Authentication
- Multiple SSID
- Wireless Rate-control
- IEEE802.11e: WMM (Wi-Fi Multimedia)
- SSID VLAN Grouping with LAN Port (Port-based VLAN)
* Firmware Upgradeable
Interface of Vigor2860ac |
Hardware Interface |
LAN |
6 x 10/100/1000Base-Tx LAN Switch, RJ-45 |
WAN |
1 x VDSL2/ADSL2/2+ WAN Port (WAN1), RJ-11 for Annex A/RJ-45 for Annex
B |
1 x 10/100/1000Base-Tx, RJ-45 (WAN2) |
USB |
2 x USB Host 2.0 |
3 x Detachable Antennas |
1 x Factory Reset
Button |
1 x Wireless On/ Off/ WPS
Button |
Temperature |
Operating : 0C ~ 45C |
Storage : -25C ~ 70C |
Humidity |
10% ~ 90%
(non-condensing) |
Max. Power |
24 Watt |
Dimension |
L241 * W165 * H44
(mm) |
Power |
DC 12V @ 1.5A ~
2A |