All stock codes associated to this product
CT25664BD160B, LX56048A
Overview
DDR3L 240-pin DIMM
Desktop modules that operate at speeds up to 1600 MT/s and have a CL11
latency. It is dual voltage and can operate at 1.35V or 1.5V. It is Unbuffered
and is non-ECC. It conforms to the industry standard UDIMM layout of 240 pins
and is compatible with computers that take DDR3 UDIMM memory.
A dual inline memory module (DIMM) consists of a number of memory components
(usually black) that are attached to a printed circuit board (usually green).
The gold pins on the bottom of the DIMM provide a connection between the module
and a socket on a larger printed circuit board. The pins on the front and back
of a DIMM are not connected to each other.
Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered
or Fully Buffered modules).
To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and
a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a
standard DDR2 DIMM socket or a DDR DIMM socket.
The number of black components on a 240-pin DIMM can vary, but it always has
120 pins on the front and 120 pins on the back, for a total of 240. 240-pin
DIMMs are approximately 5.25 inches long and 1.18 inches high, though the
heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR
DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and
184-pin DIMMs have only one notch within the row of pins.
Specifications
Brand |
Crucial |
Form
Factor |
UDIMM |
Total
Capacity |
2GB |
Warranty |
Limited
Lifetime |
Specs |
DDR3L PC3L-12800 CL=11
Unbuffered NON-ECC DDR3L-1600 1.35V 256Meg x 64 |
Series |
Crucial |
ECC |
NON-ECC |
Module
Qty |
1 |
Speed |
1600
MT/S |
Tracer |
FALSE |
Voltage |
1.35V |
DIMM
Type |
Unbuffered |
Bullet
Features |
Increases system
performance |