All stock codes associated to this product
ADU31ESPX, ADU31ESP-X
The USB 3.1 or USB 3.0 to eSATAp Adapter is the easiest solution for
connecting any eSATA storage device to the latest USB 3.1 (SuperSpeed+)
or the ubiquitous USB 3.0/2.0 port. You can also connect standard SATA
devices to the USB 3.1, 3.0 or 2.0 port by using an Addonics SATA to eSATA converter adapter, making this adapter a very handy accessory for both Notebook, Desktop, server or any computer system.
The USB 3.0 to eSATAp Adapter is also compatible with
Port Multiplier and eSATA optical storage. As a result, any eSATA RAID
storage, including Addonics RAID Tower or RAID Rack with eSATA connection, can be instantly turned into a USB 3.0 external RAID storage system. For Port Multipliers that supports individual drive configuration, the USB 3.0 - eSATAp adapter can add multiple individual eSATA devices to your system, similar to connecting multiplier devices via a USB hub.
The eSATA port on this adapter is an
eSATA USB Hybrid port (EUHP), a new port commonly found on new
generations of Notebook computers. This new port works with both
standard eSATA and Addonics Universal Hybrid eSATA cable (universal eSATAp cable).
The Universal eSATAp cable enables low power 5V eSATA device such as
2.5" eSATA hard drives, the Addonics Ruby / Ruby Cipher drive kits,
eSATA / USB DigiDrives and the Micro SATA DigiDrives to be directly
powered from the computer without using any external power adapters. To
learn more about this eSATA USB Hybrid port, please visit the following EUHP tutorial page.
The diagram below illustrates how the Addonics universal eSATAp cable
connects the Addonics Ruby eSATA drive to the USB port on a Notebook and
offers true portability for low power eSATA storage via this Addonics
adapter. The universal eSATAp cable also comes with a set of interchangeable power tips to support most low power 5V eSATA storage devices.
Diagram below illustrates connecting eSATA storage
device using standard eSATA cable to USB port via the USB 3.0 - eSATAp
adapter. In this case, the storage device requires separate power
adapter or USB power cable for the eSATA storage device
Specifications
USB (host end) -model: ADU31ESP
Standard USB 3.1 type A plugCompliant with Universal Serial Bus 3.1 SpecificationSupports SuperSpeed+ (10 Gbps), SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transaction
Support Mass Storage Device Class Bulk only transferSupport USB vendor command(Control Endpoint) and SCSI vendor commandSupport USB host controller for UHCI,OHCI, EHCI m
eSATA (device end) -Compliant with Serial ATA Specification Revision 2.6Supports Serial ATA transfer rate of 6.0 GbpsSupports ATA/ATAPI Packet Command SetSupports ATA/ATAPI LBA 48 Addressing modeHybrid eSATA USB port , same as combo eSATA USB port found on many new Notebook
support 5V and eSATA data over a single cable when using Addonics Universal eSATAp cable or generic hybrid eSATA USB cablesupport standard eSATA cableSupport spread spectrum in receiverSupport PIO, MDMA and UDMA mode data transferSupport SATA power saving mode partial and slumber mode
Maximum power consumption: 250 mA at 5VDimensions: (W x D x H) - 38mm x 80.55mm x 14.62mm (1.5in x 3.17in x 0.58in)Weight: 22 g (0.78 oz.)Enclosure: plastic ABS blackOperating temperature and humidity: 0 to 70° C, 5 - 90% RHStorage temperature and humidity: -40 to 85° C, 5 - 95% RH (non-condensing)RoHS compliant
