Power
supply |
AC 100240 V, 50/60 Hz
(other countries) |
Power
consumption |
378
W |
Standby power
consumption |
Standby Mode (Eco)
*1 |
0.4
W |
Standby Mode
(Normal) |
8W |
LCD
panel |
Panel
Size |
0.64 inches (1.63 cm)
(16:10 aspect ratio) |
Display
Method |
Transparent LCD panel (
3, R/G/B) |
Pixels |
2,304,000 (1,920 1,200)
3, total of 6,912,000 pixels |
Lens |
1.6x manual zoom (throw
ratio: 1.11.8:1), manual focus F 1.602.12, f 15.3024.64
mm |
Lamp |
270 W UHM lamp
1 |
Screen size
(diagonal) |
30300
inches |
Brightness*2 |
4,800 lm (ANSI) (input
signal: PC, lamp power: Normal, picture mode:
Dynamic) |
Center-to-corner
uniformity*2 |
85% |
Contrast*2 |
10,000:1 (all white/all
black) (input signal: PC, lamp power: Normal, picture mode: Dynamic, Iris:
on) |
Resolution |
1,920 1,200
pixels |
Scanning
frequency |
HDMI |
525i (480i)*3, 625i
(576i)*3, 525p (480p), 625p (576p), 750 (720)/60p, 750
(720)/50p, |
1125 (1080)/24p, 1125
(1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p, 1125
(1080)/50p, 1125 (1080)/60i, 1125 (1080)/50i |
Displayable resolution:
VGA to WUXGA (non-interlace), Dot clock frequency: 25 MHz to 162
MHz |
RGB
(analog) |
fH: 15 kHz 91 kHz, fV:
24 Hz 100 Hz, dot clock: 162 MHz or lower |
YPBPR(YCBCR) |
fH: 15.73 kHz, fV:
59.94 Hz [525i (480i)] |
fH: 15.63 kHz, fV: 50
Hz [625i (576i)] |
fH: 31.47 kHz, fV:
59.94 Hz [525p (480p)] |
fH: 31.25 kHz, fV: 50
Hz [625p (576p)] |
fH: 45.00 kHz, fV: 60
Hz [750 (720)/60p] |
fH: 37.50 kHz, fV: 50
Hz [750 (720)/50p] |
fH: 33.75 kHz, fV: 60
Hz [1125 (1080)/60i] |
fH: 28.13 kHz, fV: 50
Hz [1125 (1080)/50i] |
fH: 28.13 kHz, fV: 25
Hz [1125 (1080)/25p] |
fH: 27.00 kHz, fV: 24
Hz [1125 (1080)/24p] |
fH: 27.00 kHz, fV: 48
Hz [1125 (1080)/24sF] |
fH: 33.75 kHz, fV: 30
Hz [1125 (1080)/30p] |
fH: 67.50 kHz, fV: 60
Hz [1125 (1080)/60p] |
fH: 56.25 kHz, fV: 50
Hz [1125 (1080)/50p] |
Video/S-Video |
fH: 15.73 kHz/15.63
kHz, fV: 59.94 Hz/50 Hz
(NTSC/NTSC4.43/PAL/PAL60/PAL-N/PAL-M/SECAM) |
Optical axis
shift |
Vertical 0+44% from
center of screen (manual), |
U/D ratio on top end:
17:1 |
Keystone correction
range |
Vertical: maximum 25
(auto/manual, input: WUXGA), |
Horizontal: maximum 30
(manual, input: WUXGA) |
Installation |
Front ceiling/Front
desk/Rear ceiling/Rear desk |
Terminals |
HDMI IN: HDMI 19-pin 2
(Deep Color, compatible with HDCP), audio signal: Linear PCM [sampling
frequency: 48 kHz/44.1 kHz/32 kHz] |
COMPUTER IN 1: D-sub
15-pin (female) x 1 (RGB/Y PB (CB) PR (CR)/S-Video) |
COMPUTER IN 2/MONITOR
OUT: D-sub 15-pin (female) x 1 (RGB/Y PB (CB) PR (CR) (input/output
switching)) |
VIDEO IN: Pin jack x
1 |
AUDIO IN 1: M3 jack
(L/R) x 1 |
AUDIO IN 2: M3 jack
(L/R) x 1, compatible with MIC input |
AUDIO IN 3: Pin jack
(L/R) x 1 |
AUDIO OUT: M3 jack
(L/R) x 1 (monitor out: variable) |
SERIAL IN: D-sub 9-pin
(female) x 1 for external control (RS-232C compliant) |
LAN: RJ-45 1 for
network connection, 10Base-T/100Base-TX, compatible with
PJLink |
Built-in
speaker |
4.0 cm round shape 1,
output power: 10 W (monaural) |
Operating
noise*2 |
37 dB (lamp power:
Normal), 29 dB (lamp power: Eco) |
Cabinet
materials |
Molded
plastic |
Dimensions (W H
D) |
389 125*5 332 mm
(15-5/16 4-29/32*5 13-1/16 in) |
Weight*4 |
Approximately 4.8 kg
(10.6 lbs) |
Operating
environment |
Operating temperature:
0 C40 C (32 F104 F)*6 (altitude: less than 1200 m), 0 C30 C (32 F86 F)
(altitude: 1200 m2,700 m) |
Operating humidity: 20
%80 % (no condensation) |
Supplied
accessories |
Wireless remote control
unit 1, Power cord with power cord holder x 1 (x 2 for UK and Asia),
Software CD-ROM 1 (Operating instructions, Multi Projector Monitoring and
Control Software, Logo Transfer Software, Wireless Manager ME 6.2 software
[PT-VZ575N/VW535N/VX605N only]), Batteries (AAA type 2), RGB cable, Lens
cap x 1 |
NOTE |
*1 When the Standby
Mode is set to Eco, network functions such as Power On via LAN will not
operate. Also, only certain commands can be received for external control
using the serial terminal. |
*2 Measurement,
measuring conditions, and method of notation all comply with ISO 21118
international standards. |
*3 Pixel-repetition
signal (dot clock frequency: 27.0 MHz) only. |
*4 Average value. May
differ depending on the actual unit. |
*5 With legs at
shortest position. |
*6 When operating
temperature is between 35 C and 40 C, lamp power automatically switches to
Eco in order to protect the
projector. |