All stock codes associated to this product
POEFE24TV2
Overview
The POEFE24TV2 is an unmanaged, low cost Fast Ethernet
Power over Ethernet (PoE) rackmount switch, designed to support higher density
workgroups where devices such as IP Phones require powering from the switch over
UTP data cable.
The POEFE24TV2 is a rackmount switch featuring 24x
10/100Mbps Fast Ethernet PoE ports, fully compliant to the IEEE 802.3at and af
Power over Ethernet standards. All ports are auto-sensing, auto MDI/X, allowing
easy connectivity to your existing switching infrastructure and PoE Powered
Device (PD) such as IP Phones, Wireless Access Points and IP Video Cameras. All
ports support up to 30W of power, with the switch supporting up to 220W watts
total power - 9W per port at full load. The switch itself is powered by an
internal power supply.
The POEFE24TV2 is the ideal solution for adding low
cost, high reliability PoE capability to support PoE powered devices for larger
workgroups.
Features
-
Up to 30 watts of power supported on each PoE
port
-
Switch supports 220 watts total PoE power for all
PoE ports
-
At full load the POE switch will support 30W on 7
ports, 15.4W on 12 ports or 7.5W on 24 ports
-
Supports all IEEE802.3at and af compliant PD PoE
devices
-
IEEE802.3x Flow Control for full duplex mode and
Back Pressure for half-duplex mode
-
8K MAC address with auto-learning and
auto-aging
-
LED indicators for monitoring power, link,
activity and speed
Standards
-
IEEE 802.3 10Base-T Ethernet
-
IEEE 802.3u 100Base-TX Fast Ethernet
-
IEEE 802.3x Full Duplex Flow Control
-
IEEE 802.3af Power over Ethernet
-
IEEE 802.3at Power over Ethernet
Physical Ports
Performance
-
Switching Capacity: 4.8Gbps
-
Forwarding Rate: 14880pps (Ethernet); 148800pps
(Fast Ethernet)
-
MAC Address Table Size: 8K
PoE Specifications
- Maximum PoE power per port: 30 watts
-
Maximum PoE power per port (full load): 9
watts
-
Total PoE Power support by Switch: 220
watts
-
POE Pins: PoE delivered on pins 4, 5 (Power-); 7
and 8 (Power+)
Mechanical Specifications
- Form Factor: 1RU Rackmount
-
Dimensions: 441mm x 208mm x 44mm (W x D x
H)
-
Weight: 2.55Kg (5.62lbs)
-
LED Indicators: System Power, LINK/ACT,
POE
-
AC Power Input: 100-240VAC, 50-60Hz, 0.7A internal
power supply
Environmental Specifications
-
Operating Temperature: 0C - 40C
-
Storage Temperature: -40C - 70C
-
Operating Humidity: 10%-90%
non-condensing
-
Storage Humidity: 5%-90%
non-condensing
Certification