All stock codes associated to this product
GS408EPP100AJS, GS408EPP-100AJS, 3639351, 606449116496
Netgear GS408EPP ProSAFE® Easy-Mount Switch
Family
Overview
- The NETGEAR ProSAFE® Easy-Mount Switch allows you to put more PoE/PoE+
ports Virtually Anywhereâ„¢ with its unique mounting system.
- The Easy-Mount Switch family comes with a full set of software features
such as traffic prioritization, VLANs, QoS and PoE power allocation.
- Moreover the Easy-Mount switches comes with Energy Efficient Ethernet for
maximum power savings.
Easy-Mount and Low Noise Operation
Deploy your PoE/PoE+ switch closest to your PoE/PoE+ devices and put your
PoE/PoE+ ports exactly where you need them.
Install your ports up in the ceiling, strapped to a pole, mounted under a
desk or tabletop. If you wish you also can rack mount the GS408EPP switch on a
19-inch standard rack. You can even rack mount 2 GS408EPP switches back to back
in a single 1U.
Thanks to the active fans the GS408EPP is a silent switch, well below offices
ambient background noise.
PoE/PoE+ Support
Power-Over-Ethernet (PoE) option available for powering IP Security Cameras,
VOIP phones, wireless access points, and other PD-powered devices.
With eight (8) PoE/PoE+ Gigabit Ethernet ports (802.3af, 802.3at) providing
up to 30W per port, and a power budget of 124W, provide power and connectivity
across one wire to power-hungry PoE devices like 802.11ac Wave 2 Access Points,
Pan/Tilt/Zoom/HD Security Cameras, security door locks, and other IoT
devices.
Easy-Mount "Virtually Anywhere" Mounting System
The innovative mounting system gives you the flexibility to place the
Easy-Mount Switch in locations where other switches will not go. Whether it's
directly on a wall, strapped to a pole, under the meeting table in a conference
room or in a server closet, vertical or horizontal, flat or perpendicular, the
unique mounting system allow you to control exactly how and where your ports and
cables are deployed.
Networking Management Features
The Easy-Mount Switches can go beyond plug-and-play connectivity with
additional ProSAFE Switch networking features, allowing businesses to segment
the network with VLANs or prioritize voice and video traffic with QoS. IGMP
Snooping allows for optimized multimedia delivery and port trunking adds
redundancy to uplinks and servers. Setup and configuration is simple using the
web browser-based configuration GUI.
NETGEAR Warranty
- Easy-Mount switches are backed by a NETGEAR ProSAFE® Limited Lifetime
Hardware Warranty.
- Lifetime Next Business Day Hardware Replacement.
- ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days.
- ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat.
Highlights
PoE/PoE+ Gigabit Ethernet Ports
- With eight (8) PoE/PoE+ Gigabit Ethernet ports (802.3at) providing up to
30W per port, and a power budget of 124W, provide power and connectivity
across one wire to power-hungry PoE devices like 802.11ac Wave 2 Access
Points, Pan/Tilt/Zoom/HD Security Cameras, security door locks, and other IoT
devices.
Easy-Mount "Virtually Anywhere" Mounting System
- The industry-first Easy-Mount mounting system allows you to put your PoE+
ports exactly where you want them: on a wall, under a tabletop/desktop, on a
pole, or even up in the ceiling on the ventilation ducts, horizontal or
vertical.
Two-in-one 1U Rackmount Capable
Because all connections are on the front (both power and ethernet
connections), and because of it's small size, you can mount two GS408EPP
Easy-Mount switches within a single 1U slot by mounting one facing out the
front, and the other facing out the back of your rack.
SOFTWARE FEATURES
Comprehensive QoS Features
Advanced controls for optimized network performance and better delivery of
mission-critical traffic such as voice and video. Ingress and egress rate
limiting allows for bandwidth shaping for mitigating network resources
constraints or for optimizing guest access bandwidth on the network.
-
Port-based
or 802.1p-based prioritization
-
Layer
3-based (DSCP) prioritization
-
Port-based
ingress and egress rate limiting
IGMP Snooping
For improved network efficiency on delivering multicast traffic. Save cost
and improve network efficiency by ensuring multicast traffic only reaches
designated receivers without the need of an extra multicast router.
Loop Detection / Auto DoS Prevention
- Detect accidental network loops and protect against DoS (Denial of
Service) attacks.
Port-based & 802.1Q-based VLANs
- Segment network into smaller groups for more secure and efficient use of
network resources.
PoE Per Port Controls
Advanced per port PoE controls for remote power management of PoE connected
devices (eg. Wireless AP, IP security cameras, LED lighting, door locks, IoT
devices) including:
-
Enable/disable
PoE power per port
-
PoE
prioritization
-
PoE
power class configuration (802.3af, 802.3at)
-
User-defined
PoE power limit per port (override detected Class)
-
Power
cycle PoE per port
Port Trunking / Link Aggregation (LAG)
Build up bigger bandwidth to support aggregated uplink/downlink traffic.
Energy Efficient Ethernet (IEEE 802.3az)
For maximum power savings and reduced energy costs.
Port Mirroring
For better and quicker network diagnostics and troubleshooting.
Cable Test
Easily identify bad Ethernet cables.
GS408EPP in an SMB
Features
Hardware
- 8-port Gigabit Ethernet Ports
- 8 PoE/PoE+ ports (802.3af, 802.3at) with 124W PoE/PoE+ Budget
- Virtually AnywhereTMEasy-Mount
system allows for:
1. On a Wall.
2. Under a Tabletop/Desktop.
3. On a rectangular or round pole.
4. Up in the ceiling.
5. In a standard 19-inch
rack
- Multi-directional power cable can be routed outwards or
downwards
- Internal power supply (simple power cord from switch to
outlet)
- LED lights can be turned off for non-distracting placement next
to a TV
Performance
- 192KB packet buffer memory (dynamically shared across only used
ports)
- 16 Gbps non-blocking fabric (bandwidth)
- 4 Priority queues
- Weighted Round Robin (WRR) priority queuing
- 4K Media Access Control (MAC) addresses with 48-bit MAC
address
- 128 Multicast groups
- 64 VLANs
- Jumbo frames up to 9K packet size supported
VLANs
- IEEE 802.1Q VLAN tagging
- Port-based VLANs (physical)
Multicast
- IGMP snooping, v1, v2 and v3
- Blocking of unknown multicast traffic
Link Aggregation
- IEEE 802.3ad - Static LAGs
- 2 LAGs with max 4 members in each LAG
Quality of Service (QoS)
- Port-based rate limiting (ingress and egress)
- Port-based QoS
- IEEE 802.1p COS
- IPv4 DSCP
- IPv4 ToS
- Weighted Round Robin (WRR)
Network Security
- Broadcast, multicast, unknown unicast storm control
- DoS attacks prevention
Reliability, Performance and
Troubleshooting
- Port mirroring both on ingress and egress traffic
- Jumbo frame support
- Broadcast storm control
- Cable diagnostics
- Loop detection
- Energy Efficient Ethernet (IEEE 802.3az) compliant
- Broadcast, multicast, unknown unicast storm
control
Management
- Password management
- Web browser-based graphical user interface (GUI) for advanced
configuration and management
- ProSAFE Plus Configuration Utility (PCU) for multi-switch
management (requires Windows PC)
- Firmware upgrade via HTTP (Web GUI) or TFTP (Plus
Utility)
- Config file transfers (backup, restore) using web browser-based
management GUI or Plus Utility
- Port mirroring; many-to-one port mirroring
- Energy Efficient Ethernet (EEE) IEEE 802.3az (deactivated by
default)
- Short cable power reduction
- Auto power-down
- Broadcast, multicast, unknown unicast storm control
- DHCP client
NETGEAR Warranty
- This product is backed by a NETGEAR ProSAFELimited
Lifetime HardwareWarranty.
- Lifetime Next Business Day Hardware Replacement.
Clickherefor coverage, availability and terms and
conditions.
- ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days
(Remote diagnostics performed by our technical experts for prompt resolution
of technical issues). ProSUPPORT coverage can be extended by purchasing one,
three, or five year contracts.
- ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat.
(Remote diagnostics performed by our technical experts for prompt resolution
of technical issues).
Specifications
Model
Description |
8-port
Gigabit Web Managed Easy-Mount Switch w/8-port
PoE/PoE+ |
Datasheet |
GS408EPP
Datasheet |
Gigabit
ports |
8 |
PoE/PoE+
Ports / PoE Budget |
8
PoE/PoE+, 124W PoE Budget |
Max
MAC entries |
4K |
Buffer
size |
192
KB |
Link
Aggregation / Port Trunking |
Manual
Static LAG |
Number
of LAGs & Number of Members |
2
LAGS with max 4 members in each LAG |
Supported
Multicast Groups |
128 |
Auto
Denial-of-Service Prevention |
Yes |
Port
Mirroring Max Number of Source Ports Allowed (Many to
1) |
1 |
Jumbo
Frame Support |
Up
to 9K packets |
Max
Power Consumption (Watts) |
5.8W
(non-PoE) 148W (PoE) |
Acoustic
Noise Level @ 25C (dBA) |
26.9
dBA |
VLAN
(# supported) |
64 |
Number
of priority queues |
4 |
Power
supply |
Internal:
100-240VAC, 50-60Hz, 2A max (power cord localized to country of
sale) |
Fan(s) |
Active
Fan |
Operating
Temperature |
0to
50C |
MTBF
(hours) |
2,715,369
hours |
Electromagnetic
compliance (A or B) |
A |
Dimensions
(W x D x H) |
380
x 100 x 43.2 mm (15 x 3.9 x 1.7 in) |
Weight |
1.6
kg(3.53 lb) |