All stock codes associated to this product
KSM26RS4/16HAI, 3716750, MEKKSM26RS416HAI, 740617270846
Kingston KSM26RS4/16HAI 16GB 1Rx4 2G x 72-Bit PC4-2666
CL19 Registered w/Parity 288-Pin DIMM
Description
Kingston's KSM26RS4/16HAI is a 2G x 72-bit (16GB) DDR4-2666 CL19 SDRAM
(Synchronous DRAM) registered w/ parity, 1Rx4, ECC, memory module, based on
eighteen 2G x 4-bit FBGA components. The SPD is programmed to JEDEC standard
latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold
contact fingers. The electrical and mechanical specifications are as
follows:
Features
- Power Supply: VDD=1.2V
- VDDQ = 1.2V
- VPP - 2.5V
- VDDSPD=2.25V to 2.75V
- Functionality and operations comply with the DDR4 SDRAM datasheet
- 16 internal banks
- Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the
banks in the same or different bank group accesses are available
- Data transfer rates: PC4-2400, PC4-2133, PC4-1866, PC4-1600
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Supports ECC error correction and detection
- On-Die Termination (ODT)
- Temperature sensor with integrated SPD
- This product is in compliance with the RoHS directive.
- Per DRAM Addressability is supported
- Internal Vref DQ level generation is available
- Write CRC is supported at all speed grades
- CA parity (Command/Address Parity) mode is supported
Specifications
CL(IDD) |
19
cycles |
Row Cycle Time
(tRCmin) |
45.75ns(min.) |
Refresh to
Active/Refresh |
350ns(min.) |
Command Time
(tRFCmin) |
|
Row Active Time
(tRASmin) |
32ns(min.) |
Maximum Operating
Power |
AUR* |
UL
Rating |
94 V -
0 |
Operating
Temperature |
0 DegreeC to +85
DegreeC |
Storage
Temperature |
-55 DegreeC to +100
DegreeC |