All stock codes associated to this product
FS116PAU, NTG7359, 606449041736
The ProSafe FS116P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the ProSafe FS116P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplinkâ„¢. The affordably priced ProSafe FS116P delivers PoE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the ProSafe FS116P is ideal for small business network that want to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras.
Specifications
Fixed Ports : 16 x 10/100 RJ-45 ports
Optional Ports : N/A
Speed : 10/100 Mbps
Design : Desktop
Performance Specifications :
Forwarding modes : Store-and-forward
Bandwidth : 3.2 Gbps
Network latency : Less than 20 µs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
Buffer memory : 96 KB embedded memory per unit
Address database size : 1,000 media access control (MAC) addresses per system
Addressing : 48-bit MAC address
Mean Time Between Failure (MTBF) : 116,009 hours (~ 13 years)
Acoustic noise : 0 dB
Connection Type : RJ-45
Size : 287 mm (W) X 103 mm (D) X 27 mm (H)
Warranty : 5 years
Networking
