
- Incredibly Quiet
- Frameless fan: Differs from the traditional framed fans by
reducing the backpressure and turbulence produced by the air hitting
the side walls of traditional fans. As a result, the frameless fans
are much quieter than the traditional fans.
- Unique fan blade design will also produce less noise due to
reduced backpressure.
- Enter bearing: The oil from the traditional sleeve bearing will
evaporate over time and allow more friction between in the bearing
unit itself, producing noise and shortening the lifetime of the fan.
The enter bearing design allows extra oil capacity to elongate the
life of the fan and reduce noise levels.
- PWM controller: The fan supports AMD PWM FSC specifications
which allows the fan to be automatically adjusted via the
motherboard BIOS. According to the temperature of the CPU, the fan
will spin at whatever speed is necessary to reduce unnecessary
noise.
- Anti-Vibration Design
- The TMG CPU coolers have built-in springs to absorb any
vibrations created during the fan operation, this prevents the
heatsink and clip from damaging CPU through vibration, also extends
the lifetime of CPU.
- Maximum Cooling
- Four heatpipes can efficiently deliver the heat from the CPU
directly to the dissipation fins.
- The high density heatsink fins significantly increase the
surface area for cooling; combined with a high airflow fan, the
improvement is drastic.
- Easy Installation
- Easy to install without removing motherboard
- Enter Bearing
- The fans enter bearing design creates additional oil capacity
within the fan bearing and seals up the bearing even more than the
traditional sleeve bearing. The lifetime of the fan is then extended
due to better lubrication and less friction.

- Compatibility AMD Athlon 64 X2 (Socket 939, AM2)
- AMD Athlon 64 FX (Socket 939, AM2)
- AMD Athlon 64 (Socket 754, 939, AM2)
- AMD Sempron (Socket 754, AM2)
- Dimension 117(L) x 102(W) x 141(H)mm
- Heatsink Material Copper Base / Aluminium Fin
- Heatpipe 6mm x 4
- Fan Dimension 92(L) x 92(W) x 32(H)mm
- Rated Voltage 12 V
- Fan Speed 300~2500RPM(PWM)
- Max. Air Flow 35.14 CFM
- Noise Level 16 dBA
- Life Expectation 50,000 Hours
- Connector 4-Pin PWM function
- Weight 505g
|