MHV2xxxBH Series - 5,400rpm
A single storage solution for the laptop or the data centre
Put Fujitsu 2.5-inch Serial ATA hard-disk drives to work for you
- Serial ATA (SATA) enables the high-speed transfer of data (1.5Gb/s), outstripping older, 16-bit parallel bus technology. The 2.5-inch SATA disk drives feature Native Command Queuing (NCQ), which simultaneously coordinates up to 32 instructions to be queued and reordered by the hard-disk controller.
- The 2.5-inch 9.5mm hard disk drive is quieter, uses less heat and power.
- Three to four 2.5-inch SATA drives can fit in the same space as one 3.5-inch drive, allowing it to be used in a RAID array*
- The small form factor allows for the design of compact, space efficient storage products, including notebooks and storage towers, as well as non-PC devices.
- Fujitsu has nearly 20 generations of 2.5-inch form factor product expertise.
More than 30 years ago Fujitsu was manufacturing 14-inch drives. Now, Fujitsu is the first hard-disk drive manufacturer to combine the future of storage into a single 2.5-inch SATA-based drive.
This efficient disk drive gives you the best of all worlds. It accomplishes more, yet consumes less power; it takes up less space, but can be used in more solutions. It improves input-output per second (IOPS), increases performance when using multiple drives, provides a lower entry-system cost, and increases reliability. And you can rely on the 2.5-inch SATA drives to meet industry specifications. After all, as an early member of the SATA Working Group, Fujitsu helped define the specifications for SATA.
The new mobile drives' ample storage capacity (up to 120GB (1) versions are available), speed (Host Transfer rate of 150 MB/s and Track to Track Seek Time of 1.5ms), and low cost (rivalling parallel ATA) enable innovation and improvements in everything from laptop and notebook computers to compact RAID systems.
For all these reasons, Fujitsu's 2.5-inch SATA drive is clearly the wave of the future. And the technical savvy of Fujitsu, coupled with its strong customer support programs, can help you make the seamless migration to 2.5-inch drives and position your business for the future.
Technical Specifications
| Model |
MHV2120BH |
| Capacity (formatted) (1) |
120 GB |
| Bytes/Sector |
512 |
| Seek Time |
Track to Track |
1.5 ms typ |
| Average |
12 ms typ. |
| Maximum |
22 ms typ. |
| Average Latency |
5.56 ms |
| Rotational Speed |
5,400 RPM |
| Data Transfer to/from Host |
150 MB/s |
| Interface |
ATA-7, SATA 1.0a, SATAII 1.0 |
| Buffer Size |
8 MB |
| Power Requirements |
Voltage |
5 V plus or minus 5 per cent |
| Spin-Up |
1.0 A typ. |
| Read/Write |
2.3 W typ. |
| Idle |
0.80 W typ. |
| Standby |
0.13 W typ. |
| Sleep |
0.13 W typ. |
| Dimensions |
Height |
9.5 mm (0.37 in.) |
| Width |
70 mm (2.8 in.) |
| Depth |
100 mm (3.9 in.) |
| Weight |
99 g (3.49 oz.) or less |
| Ambient Temperature |
Operating |
5 to 55 degrees C |
| Non-operating |
-40 to 65 degrees C |
| Gradient |
20 degrees C or less |
| Relative Humidity |
Operating |
8 to 90 per cent RH (non-condensing) |
| Non-operating |
5 to95 per cent RH (non-condensing) |
| Max wet bulb |
29 degrees C (Op.), 40 degrees C (Non-op.) |
| Vibration |
Operating |
9.8 m/s2 (1.0 G) (5 to 500 Hz) |
| Non-operating |
49 m/s2 (5.0 G) (5 to 500 Hz) |
| Shock |
Operating |
2,205 m/s2 (225 G) 2ms |
| Non-operating |
8,820 m/s2 (900 G) 1ms, 1,176 m/s2 (120 G) 11ms |
| Altitude |
Operating |
-300 to 3000 m |
| Non-operating |
-300 to 12000 m |
| Acoustic Noise |
34 dBA at 30 cm (typ.), 2.8 bels (typ/) |
(1) One gigabyte (GB) : = one billion bytes; accessible capacity will be less and actual capacity depends on the operating environment and formatting
