Maxtron Tower Intel Quad/Dual-core Xeon S771 Barebones SuperQuiet Workstation

Features

Processor/Cache

• Dual 771-pin LGA Sockets
• Supports up to two Intel 64-bit Xeon processor(s) of the same type below:
  • Quad-Core Intel Xeon Processor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.20 GHz
  • Dual-Core Intel Xeon Processor 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey processor) up to 3.40 GHz

• 1333 MHz, 1066 & 667 MHz system bus

• Supports 64-bit Operating Systems
• Supports 32-bit Operating Systems

System Memory

• Eight 240-pin DIMM sockets
• Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
• Dual branch memory bus
• Memory must be populated in pairs
• Memory Mirroring supported

• 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs

• 512 MB, 1GB, 2GB, 4GB

• 1.8 V only
• 1.5V(AMB)

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

• Intel 5000X (GreenCreek) chipset
• MCH + PXH-V + ESB2

• Adaptec AIC-9410W Serial-Attached SCSI (SAS) Controller
• SAS Dual-Channel (internal)
• Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
• Host RAID 0, 1, & 10 support

• Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR2
• RAID 0, 1, 5, 10
• Optional: (Card NOT included)

• Support for Intelligent Platform Management Interface v.2.0
• 200-pin IPMI slot (SIMLP)
• (Optional: AOC-SIMLP-B)
• (Optional: AOC-SIMLP-3) with 3rd LAN support
• NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot

• Intel 82563EB Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• Intel I/OAT support for fast, scaleable, and reliable networking

• Winbond 83627HG chip

Expansion Slots

• 1 (x16) PCI-e slot
• 1 (x4) PCI-e (using x16) slot

• 2x 64-bit 133/100MHz PCI-X (3.3V) slots
• 1x 64-bit 100MHz PCI-X (3.3V) slot

• 1x 32-bit 33MHz PCI (5V) slot

Input / Output

• Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
• Compact Flash (40-pin connector, IDE 1, single channel) slot

• 1 Floppy controller; 1.44 MB, 2.88 MB

• 2x RJ45 LAN ports

• 4x USB rear ports
• 2x USB internal header
• 6 total USB ports, 2.0 Compliant / 1.1 Compliant

• AC97 Audio

• PS/2 keyboard and mouse ports

• 1 Fast UART 16550 serial port
• 1 Fast UART 16550 serial header

• 1 ECP / EEP parallel port

Chassis

• 4U Rackmountable / Tower
• Optional Rackmount Kit (CSE-PT26)

• SC743TQ-645

Dimensions

• 7.0" (177mm)

• 17.8" (452mm)

• 25.5" (647mm)

• 63 lbs (28.6kg)

• Black

Front Panel

• Power On/Off button
• System Reset button

• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
• Power Fail LED

• 2x USB Ports

Drive Bays

• 8x SAS Hot-swap Drives

• 2x 5.25" Peripheral Drive Bay
• 1x 5.25" Bay For Floppy Drive

Peripheral Drives

• Panasonic 3.5" 1.44MB Floppy Drive

SAS / SATA Backplane

• 4x 5000 RPM Hot-swappable PWM Cooling Fans
• 1x 4000 RPM Hot-Swappable Rear Exhaust PWM Fan
• 1x Air Shroud

Power Supply

• 100 - 240V, 50 - 60Hz, 11 - 5Amp

• 5V + 3.3V = 160W

• 30.0 Amp

• 4.0 Amp

• 46.0 Amp

• 0.6 Amp

• 30.0 Amp

PC Health Monitoring

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, -12V & +5V Standby, VBAT
• CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

• Total of eight 4-pin fans
• 8x fans with status monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Support for 3-pins (w/o speed control)
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan connectors

• Monitoring for CPU and chassis, environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• PSU I²C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI

• CPU / System Overheat LED
• Suspend-state Indicator LED
• +5V Standby Alert LED

• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support

Operating Environment / Compliance

• Operating Temperature: 10 to 35 C (50 to 95 F)
• Non-operating Temperature: -40 to 70 C (-40 to 158 F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)

System BIOS

• 8Mb Flash EEPROM with Phoenix BIOS

• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.3
• PCI 2.2
• ACPI 1.0
• PCI-X 1.0
• USB Keyboard support
• Hardware BIOS Virus protection