IMG 1 of 1
No Longer Available

Part Number:
84368
(?) Brand:
Manuf No:
AITI100ST
Shipping Weight:
6 KG (Includes product packaging)
Estimate Shipping
All stock codes associated to this product
AITI100ST, SNY0530
INT SATA 40-104GB AIT-1 TURBO BACKUP KIT AITI100ST

AIT-1 has just been turbo-charged with AIT-1 Turbo. Native capacity has been increased to 40GB (from 35GB) and speed has been DOUBLED to 6MB/s.

This internal Serial ATA (drive kit comes complete with cabling, media, cleaning tape, and interchangeable black or beige faceplates..

Key features
  • Up to 104GB Per Tape
  • Up to 56GB Per Hr
  • Helical Scan Recording
  • AME Based Media
  • Dual Spindle Cartridge
  • Super Cleaning System
  • Low Power Consumption
  • Efficient Background Operation
  • SATA Connectivity
  • Internal Model
  • HP Proliant Ready
Compatibility
  • Formats Supported: AIT-1 TURBO, AIT-E TURBO, AIT-1
  • Media Supported: 8mm 230m (with or without MIC)
Performance
  • Native Capacity: 40GB
  • Native Storage Speed: 6MB/S
  • Compression: ALDC (Hardware)
  • Interface Speed: Burst Transfer Rate 150MB/s
  • Buffer: 12MB Buffer
  • Average Access: 35s (AIT-1 TURBO MIC Tape), 40s (AIT-1 TURBO Non-MIC Tape)
Reliability
  • Writing Method: Helical Scan with RAW
  • Data Integrity: 3 Level ECC
  • Error Rate: <1 block in 10 pwr -17 bits (ECC ON)
  • MTBF: 300,000POH @ 100% Duty Cycle
Environment
  • Operating Temp: 5C to 40C
  • Storage Temp: -40C to 70C
  • Operating Humidity: 20% to 80% (non condensing)
  • Vibration: 0.25G peak, 5-500Hz (sweep)
  • Shock (operating): 5.0G peak, 1/2 sine 3ms duration
Connection
  • Interface: Serial ATA-1
  • Socket: Internal 7pin SATA connector
  • Voltage: DC 5V 1.0A (1.4A max), DC12V 0.3A (1.4A max)
Physical
  • Power: 8W Typ operating
  • Dimensions: 5.25": 146 (W) x 41.2 (H) x 155 (D) mm
  • Weight: 0.97Kg
System Requirements
  • Hardware: Desktop or Tower PC with 3.5" or 5.25" 1/2 hgt open front drive slot, at least one available power connector, SATA 7pin internal connector
  • Hardware Additional: Some machines may require model specific rails which must be purchased from PC manufacturer/dealer. A standard IDE ATAPI I/F connection can be used but slows performance
  • Software (PC): Pentium or above based machine with CD-ROM drive, Windows 95, 98,Me, XP, NT or 2K, 64MB RAM (minimum), 50MB Hard Drive space

No additional files, specification sheets, guides or documentation found for product.

Warranty: 1 Year Return to Base

Full manufacturers warranty details are available at the manufacturers (Sony) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

 
L7: 1 | TM: 0 | LM: 0 | TY: 4 | T: 485
We accept the following with No surcharge on VISA, Mastercard and Paypal!
� Techbuy Pty Ltd 2000 - 2026 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.