 |
| Product SKUs |
 |
| MBD-X7DB3-O |
- X7DB3 (Standard Retail Pack)
|
| MBD-X7DB3-B |
|
| |
| Physical Stats |
|
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
| Processor/Cache |
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel 64-bit Xeon processor(s) of the same type below:
- Quad-Core Intel
XeonProcessor 5300 sequence (Clovertown processor) up to 2.66 GHz
- Dual-Core Intel
XeonProcessor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz
|
| System Bus |
- 1333 / 1066 / 667 MHz system bus
|
| |
| System Memory |
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type |
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
| On-Board Devices |
|
| Chipset |
- Intel 5000P (Blackford) chipset
- MCH + PXH + ESB2
|
| SATA |
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| SAS |
- Adaptec AIC-9410 Serial-Attached SCSI (SAS) Controller
- SAS Dual-Channel (internal)
- Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
- Host RAID 0, 1, & 10 support
|
| RAID |
- Support for Zero-Channel RAID with AOC-LPZCR2
- Optional: (Card not included)
- RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP)
|
| Network Controllers |
- Intel (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 16 MB of video memory
|
| Super I/O |
|
| |
| Input / Output |
|
| SAS |
- Eight SAS / SATA (internal) ports
- Up to 8 SAS / SATA hard drives supported
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
| Parallel Port |
- 1 ECP / EEP parallel port
|
|
|
|
| Chassis ( Optimized for X7DB3 ) |
|
| 2U Chassis |
- CSE-825TQ-R700LPV
- CSE-825TQ-560LPV
- CSE-825TQ-560RCV
- CSE-825TQ-R700RCV
- CSE-823T-550LP
|
| 3U Chassis |
- CSE-836E1-R800
- CSE-836E2-R800
- CSE-833T-550
- CSE-833T-R760
- CSE-933E1-R760
- CSE-933E2-R760
- CSE-933T-R760
- CSE-933TQ-R760
|
| Tower / 4U Rackmount |
- CSE-745TQ-R800
- CSE-745TQ-800
- CSE-743TQ-R760
- CSE-743T-R760
- CSE-743T-650
- CSE-743T-645 (FAN-0091 Required)
|
| Important Chassis Notes |
- To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| Important Chassis Notes |
- To ensure system stability, a 550W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| |
| Expansion Slots |
|
| PCI-Express |
- 2 (x8) PCI-e slots
- 1 (x4) PCI-e (using x8) slot
- 1 SEPC (Supermicro PCI-e Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)
|
| PCI-X |
- 2x 64-bit 133MHz PCI-X (3.3V) slots
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
| |
| System BIOS |
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
| Management |
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
|
| |
| PC Health Monitoring |
|
| CPU |
- Monitors for CPU Cores, +3.3V, +5V, 12V, +1.2V
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
| Operating Environment / Compliance |
RoHS
|
- RoHS Compliant 5/6, Server Exemption
|
| Environmental Spec. |
- Operating Temperature: 10 to 35 C (50 to 95 F)
- Non-operating Temperature: -40 to 70 C (-40 to 158 F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
