|
 |
| |
 |
 |
| Dimensions |
480(L) x 220(W) x 450(H) mm |
| Weight |
15kg (33lb) |
| Material |
Aluminum Alloy |
| Motherboard Compatibility |
Standard ATX / micro ATX |
| PSU Compatibility |
Standard ATX / ATX12V |
| PCI/AGP Card Compatibility |
Full Size |
| Drive Bays |
3.5" Bay x 5, 5.25" Bay x 4 |
| Front I/O Port |
USB Port x 2, IEEE1394(Firewire) Port x 1
Headphones x 1, MIC x 1 |
|
|
| |
 |
 |
| Dimensions |
125(L) x 172(W) x 26(H) mm |
| Weight |
800g |
| Material |
Aluminum Alloy, Acrylic |
| Coolant Capacity |
Max. 300cc |
|
|
| |
 |
 |
| Power Consumption |
6W, DC 12V |
| Maximum Flow Rate |
300l/hr |
| Maximum Lift |
1.8m |
|
|
| |
 |
 |
| Dimensions |
220(L) x 220(W) x 30(H) mm |
| Bearing Type |
2 Ball - Bearing |
| Fan Speed (Min ~ Max) |
550rpm 10% ~ 850rpm 10% |
|
|
| |
 |
 |
| Dimensions |
63(W) x 63(L) x 40(H) mm |
| Weight |
160g |
| Material |
Cover (Aluminum Alloy), Base (Pure Copper) |
|
|
| |
 |
 |
| Material |
Propylene Glycol & Anti-Corrosion Agent |
| Volume |
250cc |
| Freezing Point |
-9 |
| Replacement Cycle |
1 Year |
|
|
| |
 |
 |
| |
Fan Speed Gauge
- Display the 120mm Rear Fans rotation speed in real-time. |
| |
FND (Flexible Numeric Display)
- Temperature Display: Coolant Temperature (upper display), Ambient Temperature (lower display)
- Coolant Level Sensing
- If the coolant level drops below a threshold level, an alarm will sound and the display will flicker. Please refill with
- coolant, if the display flickers.
- Coolant Temperature Sensing
- If the coolants temperature reaches above 60C(92 ), an alarm will sound and the FND Display will flicker. If the flickering
- is observed, please check for problems. |
| |
Coolant Flow Rate Gauge
- Displays the coolants flow rate in real time. |
| |
Control Knob
- Controls the Fan Speed and Coolant Flow Rate. |
| |
C/(Temperature Mode) Button
- Sets the temperature display to Celsius(C) or Fahrenheit(). |
| |
AUTO/MANUAL Button
- AUTO Mode: Automat fan speed and coolant flow rate.
- MANUAL Mode: Allows the user to manually adjust fan speed and coolant flow rate. |
| |
LED/RESET Button
- LED On/Off: A short press turn the displays LEDs On & Off.
- RESET: A long press for at least 5 seconds resets the cooling system. |
|
|
| |
 |
 |
Check that the product is placed properly. |
| |
 |
Confirm that the coolant circulation path is correct as shown below. |
| |
| |
 |
|
|
|
| |
 |
- Enclosure
- CPU Water Block (ZM-WB5)
- Jump Cable
- Anti-Corrosion Coolant (ZM-G300)
- Funnel
- Silicone Tube (1m)
- 220mm LED Fan
- 220mm LED Fan Grill
- Users Manual |
|
|
| |
 |
| Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers. |
| |
 |
 |
Do not mix any contaminants with the coolant when filling. It may cause product failure or corrosion. |
| |
 |
Check the manual when connecting cables. Incorrect connections can lead to fire resulting from short circuiting. |
| |
 |
Check for leaks on the Water Blocks and Tubes before installation. |
| |
 |
Preparing the necessary tools (Needle-Nose Pliers, Scissors) will ease the installation process. |
| |
 |
Check to see if the DC cables are properly connected before use. |
| |
 |
If the coolant is not circulating properly or if the pumps flow rate becomes too low for other reasons, the red LED will begin to flicker with an alarm sound. Immediately turn the system OFF and contact the place of purchase. |
| |
 |
Must use the provided coolant. Regularly check the amount of coolant and replenish as needed (replacement cycle of the ZM-G300 coolant is 1 year). |
| |
 |
If a leak is found, turn off the system immediately and contact the place of purchase. |
| |
 |
Do not block the Air Ducts on either side of the product. This can lead to fan failure, increased noise, or a decrease in product performance. |
| |
 |
Make sure that the Water Pump is functioning properly. |
|
|
Innovative liquid cooling integrated Extreme Hybrid Enclosure |
|
 |
| |
|
Integrated design for easy setup of a liquid cooled system |
|
 |
| |
|
5mm sturdy aluminum panels prevent chassis vibration |
|
 |
| |
|
Hinged side panels for convenient component installation and maintenance |
|
 |
| |
|
Tool-free HDD installation bays |
|
 |
| |
|
Comprehensive monitoring & display system |
|
|
|
Automatic/manual control of cooling performance and noise |
|
|
 |
| |
 |
 |
 CPU Water Block (ZM-WB5)
The CPU Water Block incorporates a pure copper base for excellent heat transfer. The Water Block Cover has been anodized to prevent corrosion. It supports Intel s Socket 775 CPUs and AMD s Socket 754/939/940/AM2 CPUs, and is designed to be light weight and easy to install.
|
|
Anti-Corrosion Coolant (ZM-G300)
This coolant contains a high quality anti-corrosion agent for various materials including copper, aluminum, plastic, and other metals that prevents corrosion for long term operation.
|
|
| |
 |
VGA Water Block (Optional)
The VGA Water Block incorporates a light weight pure aluminum base for high cooling performance, and is anodized and coated to prevent corrosion. It also incorporates pivoting fittings for easy installation of hoses.
| ZM-GWB3850/3870 & ZM-GWB8800GT/GTS (G92) |
| ZM-GWB8800 Ultra & GTX/GTS |
| ZM-GWB3 |
|
|
Northbridge Water Block (ZM-NWB1, Optional)
This anodized, pure aluminum block is built for high performance cooling, and is designed for compatibility with a wide variety of Northbridge chipsets.
|
|
|
