ADSL Compliance
Compliant with ADSL Standard
- Full-rate ANSI T1.413 Issue 2
- G.dmt (ITU G.992.1)
- G.lite (ITU G.992.2)
- G.hs (ITU G.994.1)
- ADSL over ISDN/U-R2
Compliant with ADSL2 Standard
- G.dmt.bis (ITU G.992.3)
- ADSL2 Annex M (ITU G.992.3 Annex M)(available for BiPAC 5200NA model only)
Compliant with ADSL2+ Standard
- G.dmt.bis plus (ITU G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex M)(available for BiPAC 5200NA model only)
Network Protocols and Features
NAT, static routing and RIP-1/2
NAT supports PAT and multimedia applications
Multi-to-multi NAT
Transparent Bridging
Dynamic Domain Name System (DDNS)
Virtual Server and DMZ
SNTP, DNS relay and IGMP proxy
Firewall & Virtual Private Network (VPN)
Built-in NAT Firewall
Stateful Packet Inspection (SPI)
Prevents DoS attacks including Land Attack, Ping of Death, etc.
Anti probe function
Packet filtering
URL Filtering
Password protection for system management
VPN pass-through
Quality of Service Control
Supports the DiffServ approach
Traffic prioritization based-on IP protocol,port number and address
Operating Environment
Operating temperature: 0 - 40C
Storage temperature: -20 - 70C
Humidity: 20 - 95% non-condensing
Wireless LAN
Compliant with IEEE 802.11n, 802.11g and 802.11b standards
2.4 GHz 2.484 GHz frequency range
Auto channel select
Up to 300Mbps wireless operation rate
WPS (Wi-Fi Protected Setup) for easy setup
64/128 bits WEP supported for encryption
Wireless Security with WPA-PSK/WPA2-PSK support
ATM and PPP Protocols
ATM Adaptation Layer Type 5 (AAL5)
Multiple Protocol over AAL5 (RFC 2684, formerly RFC 1483)
Bridged or routed Ethernet encapsulation
VC and LLC based multiplexing
PPP over Ethernet (PPPoE)
PPP over ATM (RFC 2364)
OAM F4/F5
ATM QoS: UBR, CBR, VBR-rt, VBR-nrt
Management
Web-based configuration
Firmware upgrades and configuration data upload/download via web-based interface
SNMP v1/v2 MIB supported
Supports DHCP server/client/relay
Hardware Specifications
Physical Interface
WLAN: 3 external antennas
DSL: ADSL port
Ethernet: 4-port 10/100M auto-crossover (MDI/MDI-X) switch
Factory default reset button
WPS button
Power jack
Physical Specifications
Dimensions: 7.28" x 4.86" x 1.42"(185mm x 123.5mm x 36mm)
Power Requirements
Input: 12V DC, 1A
Models & Supported Standards
BiPAC 5200NA: Supports Annex A and Annex M
BiPAC 5200NU: Supports U-R2 and Annex B
Annex A and Annex M: ADSL over POTS
Annex B and U-R2: ADSL over ISDN
