Low-profile business-class access point with integrated antennas for easy deployment in offices and similar RF environments
Product Overview
The Cisco Aironet 1130G Series Access Point is a single-band 802.11g access point that features business-class management, security, and scalability. This low-profile access point offers high-performance wireless connectivity in offices and similar environments.
The Cisco Aironet 1130G Series is available in two versions: unified or autonomous. Unified access points operate with the Lightweight Access Point Protocol (LWAPP) and work in conjunction with Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1130G Series can automatically detect the best-available Cisco wireless LAN controller and download appropriate policies and configuration information with no manual intervention. Autonomous access points are based on Cisco IOS Software and can optionally operate with the CiscoWorks Wireless LAN Solution Engine (WLSE). Autonomous access points, along with the CiscoWorks WLSE, deliver a core set of features and can be field-upgraded to take full advantage of the benefits of the Cisco Unified Wireless Network as requirements evolve.
The Cisco Aironet 1130G Series delivers optimal value for offices and similar environments. Built-in antennas provide omnidirectional coverage specifically designed for today's open workspaces. A multipurpose mounting bracket easily secures Cisco Aironet 1130G Series Access Points to ceilings and walls. With an unobtrusive design, Cisco Aironet 1130G Series Access Points are aesthetically pleasing and blend into their environments. For maximum concealment, the access point can be placed above ceilings or suspended ceilings. The UL 2043 rating of the Cisco Aironet 1130G Series allows for placement of the access point above ceilings in plenum areas regulated by municipal fire codes. Offered at a competitive price and optimized for easy installation and operation, the Cisco Aironet 1130G Series helps organizations attain a lower total cost of ownership.
Applications
In offices and similarly open environments, Cisco Aironet 1130G Series Access Points can be installed on the ceiling to provide users with continuous coverage as they roam throughout a facility. In school buildings and similar facilities, the access points can be installed on the ceiling of each room and hallway to provide users with full coverage and high network availability. In areas where a ceiling installation may not be practical, such as retail hotspots or similar small facilities, the access points can be mounted simply and securely on walls for complete coverage with minimal installation cost.
Features and Benefits
Table 1 lists features and benefits of Cisco Aironet 1130G Series Access Points.
Table 1. Features and Benefits of Cisco Aironet 1130G Series Access Points
Feature
|
Benefit
|
802.11g radio
|
The access point provides 54 Mbps of capacity and backward compatibility with older 802.11b clients.
|
Industry-leading radio design
|
The access point provides robust signals to long distances.
It mitigates the effects of multipath signal propagation for more consistent coverage.
|
Variable transmit power settings
|
The access point allows access point coverage to be tuned for differing requirements.
A low-dBm setting supports closer spacing of access points in high-density deployments.
|
Integrated antennas
|
The complete system is deployable out of the box without external antennas.
The access point is specifically designed to provide omnidirectional coverage for offices and similar RF environments.
|
Hardware-assisted Advanced Encryption Standard (AES) encryption
|
The access point provides high security without performance degradation.
|
IEEE 802.11i-compliant; Wi-Fi Protected Access 2 (WPA2) and WPA certified
|
These compliances help to ensure interoperable security with wireless LAN client devices from other manufacturers.
|
Low-profile design
|
The unobtrusive design blends into the environment.
"Quiet" LED does not draw attention to it when operating normally, and no action is required.
|
Multipurpose and lockable mounting bracket
|
The access point installs easily to walls, ceilings, and suspended ceiling railways.
The access point accommodates a standard padlock to prevent theft.
|
Inline power support (IEEE 802.3af and Cisco Inline Power)
|
The access point provides an interoperable alternative to AC power.
The access point simplifies deployment by allowing power to be supplied over the Ethernet cable.
The access point is compatible with 802.3af-compliant power sources.
|
Product Specifications
Table 2 lists the product specifications for Cisco Aironet 1130G Access Points.
Table 2. Product Specifications for Cisco Aironet 1130G Access Points
Item
|
Specification
|
Part number
|
AIR-AP1131G-x-K9 (Cisco IOS Software)
AIR-LAP1131G-x-K9 (Cisco Unified Wireless Network Software)
Note: The Cisco Aironet 1130G Series can be ordered with Cisco IOS Software to operate as an autonomous access point with Cisco Unified Wireless Network Software using LWAPP. When the access point is operating as a lightweight access point, a WLAN controller is required.
Regulatory domains: (x = Regulatory domain)
A = FCC
E = ETSI
P = Japan2
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, please visit: https://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.
|
Data rates supported
|
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
|
Network standard
|
IEEE 802.11b and 802.11g
|
Uplink
|
Autosensing 802.3 10 and 100BASE-T Ethernet
|
Frequency band and operating channels
|
Americas (FCC)
2.412 to 2.462 GHz; 11 channels
ETSI
2.412 to 2.472 GHz; 13 channels
Japan (TELEC)
2.412 to 2.472 GHz; 13 channels Orthogonal Frequency Division Multiplexing (OFDM)
2.412 to 2.484 GHz; 14 channels Complementary Code Keying (CCK)
5.15 to 5.25 GHz; 4 channels
Japan-P (TELEC 2 (Japan2) Cnfg)
2.412 to 2.472 GHz; 13 channels Orthogonal Frequency Division Multiplexing (OFDM)
2.412 to 2.484 GHz; 14 channels Complementary Code Keying (CCK)
5.15 to 5.35 GHz, 8 channels
Japan-Q
2.412 to 2.472 GHz; 13 channels Orthogonal Frequency Division Multiplexing (OFDM)
2.412 to 2.484 GHz; 14 channels Complementary Code Keying (CCK)
5.15 to 5.35 GHz; 8 channels
5.470 to 5.725 GHz; 11 channels
|
Nonoverlapping channels
|
802.11b/g: 3
|
Receive sensitivity (typical)
|
802.11g:
1 Mbps: -93 dBm
2 Mbps: -91 dBm
5.5 Mbps: -88 dBm
6 Mbps: -86 dBm
9 Mbps: -85 dBm
11 Mbps: -85 dBm
12 Mbps: -84 dBm
18 Mbps: -83 dBm
24 Mbps: -79 dBm
36 Mbps: -77 dBm
48 Mbps: -72 dBm
54 Mbps: -70 dBm
|
Available transmit powersettings (maximum power setting varies by channel and according to individual country regulations)
|
802.11b:
CCK:
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12 mW)
8 dBm (6 mW)
5 dBm (3 mW)
2 dBm (2 mW)
-1 dBm (1 mW)
|
802.11g:
OFDM:
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12 mW)
8 dBm (6 mW)
5 dBm (3 mW)
2 dBm (2 mW)
-1 dBm (1 mW)
|
Range
|
Indoor (distance across open office environment):
|
Outdoor:
|
802.11g:
100 ft (30m) @ 54 Mbps
175 ft (53m) @ 48 Mbps
250 ft (76m) @ 36 Mbps
275 ft (84m) @ 24 Mbps
325 ft (100m) @ 18 Mbps
350 ft (107m) @ 12 Mbps
360 ft (110m) @ 11 Mbps
375 ft (114m) @ 9 Mbps
400 ft (122m) @ 6 Mbps
420 ft (128m) @ 5.5 Mbps
440 ft (134m) @ 2 Mbps
450 ft (137m) @ 1 Mbps
|
802.11g:
120 ft (37m) @ 54 Mbps
350 ft (107m) @ 48 Mbps
550 ft (168m) @ 36 Mbps
650 ft (198m) @ 24 Mbps
750 ft (229m) @ 18 Mbps
800 ft (244m) @ 12 Mbps
820 ft (250m) @ 11 Mbps
875 ft (267m) @ 9 Mbps
900 ft (274m) @ 6 Mbps
910 ft (277m) @ 5.5 Mbps
940 ft (287m) @ 2 Mbps
950 ft (290m) @ 1 Mbps
|
Ranges and actual throughput vary based upon numerous environmental factors, so individual performance may differ.
|
Compliance
|
Standards
Safety
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
UL 2043
IEC 60950-1
EN 60950-1
NIST FIPS 140-2 level 2 validation
Radio Approvals
FCC Part 15.247
RSS-210 (Canada)
EN 300.328 (Europe)
ARIB-STD 33 (Japan)
ARIB-STD 66 (Japan)
AS/NZS 4268.2003 (Australia and New Zealand)
EMI and Susceptibility (Class B)
FCC Part 15.107 and 15.109
ICES-003 (Canada)
VCCI (Japan)
EN 301.489-1 and -17 (Europe)
Security
802.11i, WPA2, WPA
802.1X
AES, TKIP
FIPS 140-2 Pre-Validation List
Common Criteria (when running Cisco IOS Software)
Other
IEEE 802.11g
FCC Bulletin OET-65C
RSS-102
|
Antennas
|
2.4 GHz
Gain: 3.0 dBi
Horizontal beam width: 360
|
Security
|
Authentication
Security Standards
WPA
WPA2 (802.11i)
Cisco Temporal Key Integrity Protocol (TKIP)
Cisco Message Integrity Check (MIC)
IEEE 802.11 Wired Equivalent Privacy (WEP) keys of 40 and 128 bits
802.1X EAP types:
EAP Flexible Authentication via Secure Tunneling (EAP FAST)
Protected EAP Generic Token Card (PEAP GTC)
PEAP Microsoft Challenge Authentication Protocol Version 2 (PEAP MSCHAP)
EAP Transport Layer Security (EAP TLS)
EAP Tunneled TLS (EAP TTLS)
EAP Subscriber Identity Module (EAP SIM)
Cisco LEAP
Encryption
Advanced Encryption Standard Counter Mode with Cipher Block Chaining Message Authentication Code Protocol (AES CCMP) encryption (WPA2)
TKIP (WPA)
Cisco TKIP
WPA TKIP
IEEE 802.11 WEP keys of 40 and 128 bits
|
Status LEDs
|
External:
Status LED indicates operating state, association status, error or warning condition, boot sequence, and maintenance status
Internal:
Ethernet LED indicates status of activity over the Ethernet
Radio LED indicates status of activity over the radios
|
Dimensions (H x W x D)
|
7.5 x 7.5 x 1.3 in. (19.1 x 19.1 x 3.3 cm)
|
Weight
|
1.5 lb (0.67 kg)
|
Environmental
|
Operating
Altitude: 0 to 2500m
32 to 104F (0 to 40C)
10 to 90% humidity (noncondensing)
Non Operating
-40 to 158F (-40 to 70C)
Up to 95% humidity (noncondensing)
|
System memory
|
32 MB RAM
16 MB flash memory
|
Input power requirements
|
100-240 VAC; 50-60 Hz (power supply)
36-57 VDC (device)
|
Power draw
|
9.91W maximum
|
Warranty
|
90 days
|
Wi-Fi certification
|
|
System Requirements
Table 3 lists the system requirements for Cisco Aironet 1130G Access Points.
Table 3. System Requirements for Cisco Aironet 1130G Access Points
Access Using
|
Description
|
Browser
|
Using the Web browser management GUI, requires a computer running Internet Explorer Version 6.0 or newer, or Netscape Navigator Version 7.0 or newer
|
Power over Ethernet (PoE)
|
Power sourcing equipment (PSE) compliant with Cisco Inline Power or IEEE 802.3af, and providing at least 12.2W at 48 VDC
|