SATA to USB 3.0 Converter
Converts any SATA storage to SuperSpeed USB 3.0
Upgrading your system to use USB 3.0 ports? The SATA to USB 3.0 Converter converts any SATA device into the latest USB 3.0 (Superspeed) or ubiquitous USB 2.0 port. SATA I, SATA II, and SATA III hard drives, SSD (Solid State Drive), and even optical drives can now be easily converted into the blazing fast USB 3.0 interface. A 15-pin SATA power connector is built in to accommodate both 12V and 5V power source, assuring that any devices can be adequately powered.

Examples of devices which can be converted to Superspeed USB 3.0 with the SATA to USB 3.0 Converter
SATA hard drive or SSD
SATA optical drive
Addonics Diamond Drive Cartridge System
Addonics Ruby Drive Cartridge System
Can also connect to USB 2.0 pin header connector commonly found on system board with the bundled pin header cable
Product Features
  • Convert any type of SATA device including hard drives, SSD, and optical drives into the latest Superspeed USB 3.0 interface
  • Superspeed USB 3.0 Type B connector supporting up to 5Gbps maximum throughput
  • Mini vertical bridge board fits both 2.5", 3.5" or 5 1/4" SATA devices
  • Supplies power to 12V and 5V SATA drives through 15-pin SATA power connector
  • Compatible with SATA I, SATA II, and SATA III devices
  • Supports SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transaction
  • Backwards compatible to USB 2.0 ports
  • Include cable for connecting to USB 2.0 pin header on motherboard.
  • Serial ATA transfer rate of 3Gbps
  • LED pins for indicating power and drive activity
SATA to USB 3.0 Converter
Package content:
one SATA to USB 3.0 Converter, connecting cable to USB 2.0 pin header(model: AAUSBM5F), user guide

  • USB 3.0 Type B upstream connector on board
  • SATA drive 12V & 5V power from PC power supply through 15Pin SATA power connector
  • Compliant with Universal Serial Bus 3.0 Specification Revision 1.0
  • Supports SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transaction
  • Compliant with Serial ATA Specification Revision 2.6
  • Supports Serial ATA transfer rate of 3.0 Gbps
  • Supports ATA/ATAPI Packet Command Set
  • Supports ATA/ATAPI LBA 48 Addressing mode
  • Pin header on board for accessing LED
  • Operating temperature range: 0 C to +70 C
  • Operating humidity range: 5% to 90%
  • Storage temperature range: -40 C to +85 C
  • Storage humidity range: 5% - 95% (non condensing)
  • 1 year warrnty
  • Fully RoHS compliance

No additional files, specification sheets, guides or documentation found for product.

Warranty: 1 Year Return to Base

Full manufacturers warranty details are available at the manufacturers (Addonics) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

L7: 1 | TM: 4 | LM: 7 | TY: 11 | T: 5099

Secure Online Shopping

We accept the following with No surcharge on VISA, Mastercard and Paypal!
Techbuy Pty Ltd 2000 - 2020 All rights reserved.
All prices shown on are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.