RX1214RP

 

Scale up your RackStation in a Breeze

 

Synology RX1214/RX1214RP delivers an effortless solution for volume expansion and data backup for Synology RackStation RS2414+/RS2414RP+. The RX1214/RX1214RP seamlessly scales up the storage capacity of the Synology RS2414+/RS2414RP+ by an additional 12 hard drives on-the-fly when connected directly to an expansion cable.

 

 

 

When running out of hard drive capacity on the Synology RackStation, Synology RX1214/RX1214RP provides an easy way to immediately scale capacity by additional 12 hard drives. The RAID volume on the Synology RackStation can be expanded directly without having to reformat the existing hard drives, ensuring the Synology RackStation continues its service during the capacity expansion.

 

Synology RX1214/RX1214RP can be used as a dedicated local backup solution for the Synology RackStation. When created as a separate volume, the Synology RX1214/RX1214RP provides a great backup solution to its local hard disks in case of system failure.

 

 

Synology RS2414+/RS2414RP+ securely connects to Synology RX1214/RX1214RP with an high-bandwidth expansion cable that ensures maximum throughput. It allows the hard drives in the connected Synology RX1214/RX1214RP to operate as they are the internal ones of the Synology RS2414+/RS2414RP+, with no lag in data retrieval. With SATA III 6Gb/s interface support, Synology RX1214/RX1214RP unleashes the full performance of the installed drives and provides outstanding data transfer rate. To ensures 24/7 service uptime, Synology RX1214RP is equipped with redundant power supplies, allowing automatic fail-over support if one of the PSUs is failed.

 

Deep Sleep can be manually configured to take effect automatically when the system has been inactive for a period of time. This not only saves energy but also extends the lifespan of the hard disk. The RX1214/RX1214RP will also smartly power on/off with the attached RackStation, so no user intervention is needed to keep this system running smartly and efficiently.

 

Hardware Specifications
Supported Models (See More)	RS3614xs+ RS3413xs+ RS3412(RP)xs RS3411(RP)xs RS2414(RP)+ RS2212(RP)+ RS2211(RP)+
Note DSM version requirement: 4.2-3320 or later version
Storage
Drive Quantity	12
Drive Type	3.5" SATA(III) / SATA(II) HDD 2.5" SATA(III) / SATA(II) HDD 2.5" SATA(III) / SATA(II) SSD
Hot Swappable Drive
RAID Management through Synology DSM
External Ports
Infiniband port	1
Appearance
Size	88 mm X 445 mm X 570 mm
Weight	12 kg 14 kg (for RP model)
Power
Power Recovery	Synchronized with the Synology RackStation
Power Supply Unit / Adapter	400W 2 X 400W (for RP model)
AC Input Power Voltage	100V to 240V AC
Power Frequency	50/60 HZ, Single Phase
Power Consumption	108W (Access) 30W (HDD Hibernation) 2.61W (Deep Sleep) 121W (Access, for RP model) 39W (HDD Hibernation, for RP model) 6.46W (Deep Sleep, for RP model)
Note Measured fully loaded with Western Digital 3TB WD30EZRS hard drives. The figures could vary on different environments.
Redundant Power Supply (for RP model)
Temperature
Operating Temperature	5C to 35C (40F to 95F)
Storage Temperature	-10C to 70C (15F to 155F)
Relative Humidity	5% to 95% RH
Maximum Operating Altitude	6,500 feet
Others
System Fan	80 mm X 80 mm X 4 pcs
Easy Replacement System Fan
Noise Level	40.5 dB(A) 42.2 dB(A) (for RP model)
Note Noise Level Testing Environment: Fully loaded with Seagate 1TB ST31000520AS hard drive(s) in idle; Two G.R.A.S. Type 40AE microphones, each set up at 1 meter away from the Synology NAS front and rear; Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75C; Humidity: 58.2-61.8%
Certification	FCC Class A CE Class A
Warranty	3 Years
Environment & Packaging
Environment	RoHS Compliant
Packaging Content	Main Unit X 1 User's Guide X 1 Accessory Pack X 1 AC Power Cord X 1 AC Power Cord X 2 (for RP model) Expansion Cable: Infiniband X 1
Optional Accessories	Synology RKS1314 - Rail Kit Sliding