IMG 1 of 1
No Longer Available

Part Number:
231058
(?) Brand:
Manuf No:
KVR16N11S8K2/8
Shipping Weight:
0.3 KG (Includes product packaging)
Estimate Shipping
Date Added:
All stock codes associated to this product
KVR16N11S8K2/8, 740617212068
KVR16N11S8K2/8

8GB (4GB 1Rx8 512M x 64-Bit x 2 pcs.)

PC3-12800 CL11 240-Pin DIMM Kit
 
DESCRIPTION

ValueRAM's KVR16N11S8K2/8 is a kit of two 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory modules, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 8GB. The SPDs are
programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. Each 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
 
Features
 
  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 800MHz fCK for 1600Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 11, 10, 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • PCB : Height 0.740” (18.75mm), single sided component
 
SPECIFICATIONS
 
  • CL(IDD): 11 cycles
  • Row Cycle Time (tRCmin): 48.125ns (min.)
  • Refresh to Active/Refresh: 260ns (min.)
  • Command Time (tRFCmin)
  • Row Active Time (tRASmin): 35ns (min.)
  • Maximum Operating Power: 2.160 W* (per module)
  • UL Rating: 94 V - 0
  • Operating Temperature: 0o C to 85o C
  • Storage Temperature: -55o C to +100o C

No additional files, specification sheets, guides or documentation found for product.

Warranty: 1 year return to base

Full manufacturers warranty details are available at the manufacturers (Kingston) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

 
L7: 1 | TM: 4 | LM: 10 | TY: 32 | T: 1174
We accept the following with No surcharge on VISA, Mastercard and Paypal!
© Techbuy Pty Ltd 2000 - 2024 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.