All stock codes associated to this product
PBEM5300ISO, PBE-M5-300-ISO, NHUPBEM5300ISO, NHU-PBEM5300ISO
Ubiquiti PBE-M5-300-ISO 5 GHz airMAX® Bridge with RF
Isolated Reflector
Overview
Incorporating advanced engineering with proprietary airMAX technology, the
PowerBeam®M5 ISO is ideal for deployments requiring maximum performance and RF
isolation.
Innovative Mechanical Design
The integrated isolator design improves RF isolation to spatially filter out
interference, and the metal-plated interior of the rear housing enhances RF
shielding.
Superior RF Isolation
ompare the two near-field plots, and note the superior performance of the
integrated RF isolator. Both near-field plots are displayed in watts and use a
linear scale.
Advanced Software Technology
Ubiquiti’s airMAX® technology is proven in millions of deployments
worldwide, exhibiting outstanding performance in outdoor environments. The TDMA
airMAX protocol enables unprecedented scalability, high throughput and low
latency in unlicensed, multipoint networks.
Specifications
PBE-M5-300-ISO
System and Regulatory/Compliance |
Processor Specs |
Atheros MIPS 74Kc, 560
MHz |
Memory |
64 MB DDR2, 8 MB
Flash |
Networking
Interface |
(1) 10/100 Ethernet
Port |
Wireless Approvals |
FCC, IC, CE |
RoHS Compliance |
Yes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PBE-M5-300-ISO Physical/Electrical/Environmental |
Dimensions |
364 x 364 x 276 mm
(14.33 x 14.33 x 10.87") |
Weight |
2.55 kg (5.62 lb) |
Power Supply |
24V, 0.5A PoE |
Power Method |
Passive PoE (Pairs 4,
5+; 7, 8 Return) |
Supported Voltage
Range |
20-26VDC |
Max. Power
Consumption |
6W |
Gain |
22 dBi |
Operating Frequency
Worldwide USA |
5170 - 5875 MHz 5725
- 5850 MHz |
Wind Loading |
210 N @ 200 km/h (47
lbf @ 125 mph) |
Wind Survivability |
200 km/h (125 mph) |
LEDs |
(1) Power, (1) LAN, (4)
WLAN |
Signal Strength
LEDs |
Software-Adjustable to
Correspond to Custom RSSI Levels |
Channel Sizes |
5/8/10/20/30/40
MHz |
Polarization |
Dual Linear |
Enclosure |
Outdoor UV Stabilized
Plastic |
Mounting |
Pole-Mount Kit
Included |
ESD/EMP Protection |
Air: 24 kV, Contact: 24
kV |
Operating
Temperature |
-40 to 70 C (-40 to 158
F) |
Operating Humidity |
5 to 95%
Non-Condensing |
Salt Fog Test |
IEC 68-2-11 (ASTM
B117), Equivalent: MIL-STD-810 G Method 509.5 |
Vibration Test |
IEC 68-2-6 |
Temperature Shock
Test |
IEC 68-2-14 |
UV Test |
IEC 68-2-5 at 40 C (104
F), Equivalent: ETS 300 019-1-4 |
Wind-Driven Rain
Test |
ETS 300 019-1-4,
Equivalent: MIL-STD-810 G Method 506.5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PBE-M5-300-ISO
Output Power: 24 dBm |
TX Power Specifications |
RX Power Specifications |
Modulation |
Data Rate |
Avg. TX |
Tolerance |
Modulation |
Data Rate |
Sensitivity |
Tolerance |
802.11a |
6 - 24 Mbps |
24 dBm |
2 dB |
802.11a |
6 - 24 Mbps |
-94 dBm Min. |
2 dB |
36 Mbps |
24 dBm |
2 dB |
36 Mbps |
-80 dBm |
2 dB |
48 Mbps |
23 dBm |
2 dB |
48 Mbps |
-77 dBm |
2 dB |
54 Mbps |
22 dBm |
2 dB |
54 Mbps |
-75 dBm |
2 dB |
802.11n/airMAX |
MCS0 |
24 dBm |
2 dB |
802.11n/airMAX |
MCS0 |
-96 dBm |
2 dB |
MCS1 |
24 dBm |
2 dB |
MCS1 |
-95 dBm |
2 dB |
MCS2 |
23 dBm |
2 dB |
MCS2 |
-92 dBm |
2 dB |
MCS3 |
23 dBm |
2 dB |
MCS3 |
-90 dBm |
2 dB |
MCS4 |
22 dBm |
2 dB |
MCS4 |
-86 dBm |
2 dB |
MCS5 |
21 dBm |
2 dB |
MCS5 |
-83 dBm |
2 dB |
MCS6 |
20 dBm |
2 dB |
MCS6 |
-77 dBm |
2 dB |
MCS7 |
20 dBm |
2 dB |
MCS7 |
-74 dBm |
2 dB |
MCS8 |
24 dBm |
2 dB |
MCS8 |
-96 dBm |
2 dB |
MCS9 |
24 dBm |
2 dB |
MCS9 |
-95 dBm |
2 dB |
MCS10 |
23 dBm |
2 dB |
MCS10 |
-92 dBm |
2 dB |
MCS11 |
23 dBm |
2 dB |
MCS11 |
-90 dBm |
2 dB |
MCS12 |
22 dBm |
2 dB |
MCS12 |
-86 dBm |
2 dB |
MCS13 |
21 dBm |
2 dB |
MCS13 |
-83 dBm |
2 dB |
MCS14 |
20 dBm |
2 dB |
MCS14 |
-77 dBm |
2 dB |
MCS15 |
20 dBm |
2 dB |
MCS15 |
-74 dBm |
2 dB |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PBE-M5-300-ISO
Antenna Information |
Gain |
22 dBi |
Max.
VSWR |
1.5:1 |
Built-In Mechanical
Downtilt |
20 |