All stock codes associated to this product
AD252MSDR
Addonics AD252MSDR 2.5" Dual mSATA flash
drive
Overview
This 2.5" inch dual mSATA flash drive kit is designed to enable two mSATA
(mini SATA) SSDs to be used like a standard 9 mm height 2.5" SATA hard drive.
The two mSATA SSDs can be configured to form a single RAID volume and used as a
direct replacement for the 2.5" SATA hard drive. It can be used in the tray-less
removable drive bay system such as the Addonics family of Snap-In mobile rack or
Disk Array. This drive kit is capable of performance up to 6 Gbps and allows the
two mSATA card to be used as bootable SSD. The frame bracket on this drive kit
has the same mounting holes location as on a standard 2.5" hard drive. As a
result, any equipment such as Notebook computer that uses a 2.5" SATA hard drive
with 9 mm height or thicker can be easily replaced with the low power, high
performance and shock resistant mSATA card, When connecting to a Port Multiplier
compatible SATA port, the two mSATA SSDs can also be set up to operate as two
independent drives.
The dimensions and the screw hole locations on the drive frame are
the same as on a standard 9 mm SATA hard drive
Installing mSATA card into the adapter
Compatible with tray-less removable drive system such as Addonics
Snap-in Mobile Rack or Disk Array
Features
- Convert standard mSATA card into a
9 mm height 2.5" SSD drive
- Can install up to two mSATA (mini
SATA) SSDs
- The two mSATA cards can be
configured as RAID 0, RAID 1, BIG DRIVE (SPAN) or as two individual
drives*
- Use as direct replacement for 2.5"
9 mm height SATA hard drive for Notebook or any computer equipment
- Can be used as
removable storage media in conjunction with the Addonics Pocket UDD25
or Internal UDD25
- Compatible with
tray-less removable drive system such as Addonics family of 2.5"
Snap-In mobile rack or Disk
Array
- The resulted RAID volume can be
used as direct replacement for 2.5" hard drive with drive thickness of 9 mm or
higher
- Compatible with
Port Multiplier
- Support maximum data transfer of 6
Gbps when connects to SATA III port
- Can be the primary bootable device
containing the OS and applications
- No special tool required to mount
the mSATA cards onto the adapter
- OS independent with no software
driver to install
* For individual drive configuration, the SATA port must be Port Multiplier
compatible. SATA port on most laptop systems are not PM compatible. Please check
with your equipment manufacturer if you plan to use this adapter for two
individual drives set up.
Specifications
- 22-pin SATA and power combo connector (same as
2.5" SATA hard drive)
- SATA Hot-swappable support when connected to
SATA port supporting such feature
- Maximum transfer rate: 6 Gbps. Actual speed
depends on the speed of the mSATA SSD
- 2 mSATA card connectors plus two hold down
spring clips
- Dimensions (W x L x H): ~ 69.85 x 100.2 x 9 mm
(same as 2.5" hard drive with 9 mm height)
- Weight:~ 52 g (1.83 oz.)not including the mSATA
cards
- Power: +5V from PC power supply
- Minimum Current: ~50 mA at 5V without the mSATA
cards
- Industrial operating Temperature:0 - 65 C
- Operating Humidity: 5% - 95% (non
condensing)
- Storage Temperature: -40 ?C to + 85C
- Storage Humidity: 5% -
95%
