All stock codes associated to this product
CLW113CA12SWA, CL-W113-CA12SW-A
Overview
Pacific RL360 RGB Water Cooling Kit
Thermaltake has launched the new Pacific RL360 RGB Water Cooling Kit as part
of its “hardcore” spirit towards the ultimate in custom PC water cooling. A LCS
combo unit, the kit is composed of one CPU water block, one D5 pump and
reservoir, one 360mm radiator, six compression fittings (chrome), Riing 12 LED
RGB fans (three fan pack), tube, blue opaque coolant, and other accessories.
Together, these provide exceptional performance, unrivalled reliability, and
styling to enthusiasts.
Tt LCS Certified is the hallmark that ensures first-class performance from
the best features and fitment. A certification exclusive to Thermaltake, it sets
the benchmark for all true LCS chassis and is applied only to products that meet
our stringent design standards for delivering what hardcore enthusiasts demand.
The Tt LCS certification is a way for Thermaltake to designate to all power
users the chassis which have been tested for best compatibility with extreme
liquid cooling configurations.
Pacific W1 CPU Water Block
The W1 CPU water block is constructed with a copper base and anti-corrosive
nickel plating to provide exceptional heat transfer and cooling performance.
Fits all modern CPU sockets.
Pacific PR22-D5 Pump/Reservoir Combo
The PR22-D5 includes a 300ml reservoir and D5 pump to provide the perfect
combination for proper water cooling circulation and capacity, manufactured from
high quality POM and PMMA material.
Riing 12 RGB High Static Pressure LED Radiator Fan (3 fans
pack)
Three patented circular 256 multicolored 120mm RGB radiator fans with
high-static pressure design, one smart fan controller included.
Pacific RL360 Radiator
With high-density fin design (FPI: 14), the 360mm radiator is optimized to
accommodate high airflow and high air pressure with increased capacity and
provides superior cooling performance to all components.
C1000 Opaque Coolant Blue
The latest C1000 Opaque Coolant launched by Thermaltake is used as
anti-corrosion protection fluid and heat-transfer medium for PC water-cooling.
Made in Germany, the C1000 Opaque coolant is virtually odorless, non-flammable,
and high performance liquid, offering superb protection for copper, nickel,
brass, and aluminum. Choose from seven vivid colors: red, green, blue, orange,
yellow, white, and purple to brighten up any build with Thermaltake.
Pacific 1/2” ID x 3/4” OD Compression Fittings (Chrome)
Six durable brass compression fittings allow proper connection to G1/4” ports
to properly secure to cooling components.
V-Tubler 4T
The V-Tubler 200cm ID 1/2” (13mm) water tube provides custom PC water cooling
configurations with flexibility and durability from end to end.
Remarkable Expansion
The Pacific RL360 RGB Water Cooling Kit provides multiple LCS components for
users to build the ultimate in custom configuration, allowing enthusiast to
build up aesthetically-superior water cooling systems by incorporating
externally-modular upgrades for their chassis.
Caution
Thermaltake recommends the following steps to be taken before using the
Pacific series radiators and water blocks:
- To ensure a clean loop, flush and rinse your radiators and water blocks
with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your
loop and reduce performance.
- It is strongly recommended to use market proven pre-mix coolant, such as
Thermaltake Coolant 1000. It offers great performance while protecting the
entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse and dry.
This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your
water loop setup:
- It is strongly recommended to use market proven pre-mix coolant, such as
Thermaltake Coolant 1000. It offers great performance while preventing the
entire cooling system copper, brass, nickel, aluminum, and steel from
corrosion.
- Fill the reservoir with coolant and cycle the power on and off several
times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump
turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the
pump
- If necessary tilt the system slightly from side to side to bleed the air
out of the loop.
- Place some paper towels under fittings and joining points to test for
leaks.
- Run the loop with the fill port open for about 24 hours to completely
bleed the air out of the loop
- Before starting, flush out your system correctly to prevent any coolant or
unwanted particles sticking to your tubes, radiators and other cooling
components.
- Coolant might fade over time.
Specifications
P/N |
CL-W113-CA12SW-A |
Dimension |
97.5(L) x 84 (W) x
289.4 (H) |
Compatibility |
Intel LGA
2011/1366/1155/1156/1151/1150/775 AMD
FM2/FM1/AM3+/AM3/AM2+/AM2 |
Weight |
5.8
kg |
Components
Dimension |
Pump&Reservoir:
94.1 (L) x 87.4 (W) x 309.7 (H) |
Radiator : 394(L) x 120
(W) x 39.5 (H) |
Tube
Dimension |
OD : 3/4 ( 19 mm ) : ID
: 1/2( 13 mm ) |
Fan
Color |
Riing 256
Colors |
Coolant
Color |
Blue |
Kit
Contents |
CPU Water
Block |
- Pacific W1 CPU Water
Block x1 |
|
Pump/Reservoir |
- Pacific PR22-D5
Pump/Reservoir Combo x1 |
|
Radiator |
- Pacific RL360
Radiator x1 402.5 (L) x 129 (W) x 64 (H) |
|
Fittings |
- Pacific 1/2'(12.7mm)
ID x 3/4'(19mm) OD Compression (Chrome) x6 |
|
Fan |
- Riing 12 LED Radiator
Fan 256 Color 3 Pack |
|
Tube |
- V-tubler 4T
1/2'(12.7mm) ID x 3/4'(19mm) OD Transparent Tube x2
Meters |
|
Coolant |
- C1000 Blue Opaque
Coolantx1 |
|
Accessory |
- Intel and AMD
Universal Backplated & Mounting Kit |
- 24pin ATX Bridge Tool
x1 |
- Thermaltake Thermal
Grease x1 |