All stock codes associated to this product
PBE5AC500ISO, PBE-5AC-500-ISO, NHUPBE5AC500ISO, 810354025396
Overview
5 GHz airMAX ac Bridge with RF Isolated Reflector
Incorporating advanced engineering with proprietary airMAX ac technology, the
PowerBeam ac ISO is ideal for deployments requiring maximum performance
and RF isolation.
Models:PBE-5AC-500-ISO
Performance Breakthrough
airMAX ac products offer improved latency, noise immunity, scalability
and significantly increased throughput performance.
Innovative Mechanical Design
The integrated isolator design improves RF isolation to spatially filter out
interference, and the metal-plated interior of the rear housing enhances RF
shielding.
Superior RF Isolation
Compare the two near-field plots, and note the superior performance of the
integrated RF isolator. Both near-field plots are displayed in watts and use a
linear scale.
Superior Processing
Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency
and network scalability. The custom silicon provides hardware acceleration
capabilities to the airMAX scheduler, to support the high data rates and dense
modulation used in airMAX ac technology.
Advanced Software Technology
Ubiquiti's airMAX technology is proven in millions of deployments worldwide,
exhibiting outstanding performance in outdoor environments. The TDMA airMAX
protocol enables unprecedented scalability, high throughput and low latency in
unlicensed, multipoint networks.
Specifications
PBE-5AC-500-ISO
Dimensions
- 564 x 564 x 308 mm (22.20 x 22.20 x 12.13")
Weight
Power Supply
Power Method
- Passive PoE (Pairs 4, 5+; 7, 8 Return)
Supported Voltage Range
Max. Power Consumption
Operating Frequency
Worldwide
USA: U-NII-1
USA: U-NII-2A
USA: U-NII-2C
USA: U-NII-3
Gain
Networking Interface
- (1) 10/100/1000 Ethernet Port
Processor Specs
- Atheros MIPS 74Kc, 720 MHz
Memory
LEDs
- (1) Power, (1) LAN, (4) WLAN
Signal Strength LEDs
- Software-Adjustable to Correspond to Custom RSSI Levels
Channel Sizes
PtP Mode
PtMP Mode
Max. VSWR
Built-In Mechanical Downtilt
Polarization
Enclosure
- Outdoor UV Stabilized Plastic
Mounting
Wind Loading
- 984 N @ 200 km/h (221.2 lbf @ 125 mph)
Wind Survivability
ESD/EMP Protection
- Air: 24 kV, Contact: 24 kV
Operating Temperature
- -40 to 70 C (-40 to 158 F)
Operating Humidity
Wireless Approvals
RoHS Compliance
Salt Fog Test
- IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test
Temperature Shock Test
UV Test
- IEC 68-2-5 at 40 C (104 F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test
- ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method
506.5