All stock codes associated to this product
AF5, AF-5, NHUAF5, NHU-AF-5, 810354024863, 817882026468
Overview
- Up to 20 Gbps Aggregate Performance* and Sub-Millisecond Latency with
World’s Best Unlicensed-Band 15.9 bps/Hz Spectral Efficiency.
*airFiber is used as a backhaul serving thousands of
basestations.
Performing as a carrier-class network backhaul, airFiberdelivers
robust FDD performance in full-duplex mode with 0.2 millisecond latency.
Spectral Efficiency Breakthrough
airFiber® implements the most efficient use of unlicensed-band spectrum – a
vital attribute in increasingly crowded RF environments. By employing a unique
dual-antenna design and proprietary self-interference cancellation algorithms,
airFiber extracts more usable channels out of the available spectrum than any
other comparable radio system. airFiber’s built-in configuration tool guides the
selection of RF channel bandwidths, transmit power, and other parameters to
minimize interference potential and optimize link budgets.
Innovative Design, RF Agility
airFiber provides unparalleled flexibility, allowing independently
selectable, asymmetric TX/RX channel bandwidths and selectable TX/RX frequencies
wherever spectrum is available and without being locked into predetermined FDD
channel pairs. Split-frequency TDD operation facilitates maximum versatility in
avoiding interference in today’s crowded bands. Channel width flexibility allows
you to independently configure TX and RX channel widths (10/20/30/40/50 MHz) and
place them anywhere within the radio band to suit your link.
Powerful Multi-Mode Duplexing
airFiber® supports all duplexing modes: TDD, FDD, and Ubiquiti’s patented HDD
– no other radio system provides this level of flexibility. Ubiquiti’s
proprietary protocol enables time-synchronous packet transmission, resulting in
the lowest possible, sub-millisecond latency – vital for backhaul
performance.
Line-Rate Packet Processing
Ubiquiti’s custom silicon, our proprietary INVICTUS™ core communications
processing engine, powers airFiber® to process 2+ million packets per
second.
Clean Power Output
Using digital pre-distortion compensation and multi-IFFT processing,
airFiber® delivers the cleanest output spectrum for unlicensed-band radio
systems. This reduces the potential impact on the RF noise environment and
allows for the use of higher-order modulation, such as 1024QAM.
20 Gbps Aggregate Performance
airFiber® operates as a high-performance wireless backhaul; its
GPS-synchronized framing support enables up to 20 Gbps of aggregate throughput
for thousands of basestations.
Specifications
AF-5 |
|
Dimensions |
938.4 x 468.4 x 281.4 mm (36.94 x 18.44 x 11.08") |
Weight |
16 kg (35.27 lb) Mount Included |
Max. Power Consumption |
40 W |
Power Supply |
50V, 1.2A PoE GigE Adapter (Included) |
Power Method |
Passive Power over Ethernet |
Supported Voltage Range |
42-58VDC |
Certifications |
CE, FCC, IC |
Mounting |
Pole Mount Kit (Included) |
Wind Loading |
863 N @ 200 km/hr (194 lbf @ 125 mph) |
Wind Survivability |
200 km/hr (125 mph) |
Operating Temperature |
-40 to 55° C (-40 to 131°F) |
LEDs |
(12) Status LEDs: |
|
Data Port Link/Activity |
|
Data Port Speed |
|
Management Port Link/Activity |
|
Management Port Speed |
|
GPS Synchronization |
|
Master/Slave |
|
Link Status |
|
Modulation Mode 0.25x to 4x, 6x, 8x, 10x (Unlabeled),
Overload |
|
Remote and Local Displays (Calibrated Signal
Strength) |
Operating Frequency |
|
FCC 15.247, 15.407, IC RSS-210 |
5470 - 5600 MHz, 5650 - 5850 MHz |
ETSI EN 301 893, EN 302 502 |
5470 - 5875 MHz |
Other Regions |
5470 - 5950 MHz |
|
|
Interface |
|
Data Port |
(1) 10/100/1000 Ethernet Port |
Management Port |
(1) 10/100 Ethernet Port |
Auxiliary Port |
(1) RJ-12, Alignment Tone Port |
|
|
System |
|
Maximum Throughput |
1.2+ Gbps |
Maximum Range |
100+ km (Dependent on Regulatory Region) |
Packets per Second |
1+ Million |
Encryption |
128-Bit AES |
Uplink/Downlink Ratio |
50% Fixed |
Radio Frame Synchronization |
GPS |
|
|
Dynamic Frequency Selection |
|
AF-5 |
CE,
FCC/IC |