All stock codes associated to this product
, 4717964701534, 47179647015341
Edimax ES-5104PH V2 5-Port Fast Ethernet Switch with 4
PoE+ Ports & DIP Switch
Features
- Five 10/100Mbps Fast Ethernet ports and four PoE+ ports
- IEEE 802.3af/at PoE compliant (ports 1 - 4) for simplified deployment and
installation
- Up to 30W per PoE port (total power budget: 60W) for powering PoE-enabled
devices
- Auto-detection of powered devices (PD) and power consumption levels
- Hardware DIP switch for “Standard” and “Extend” mode selection; the
“Extend” mode features 30-watt PoE transmit distance of 200m at speed of
10Mbps
- Port-based VLAN and Loop Protection features
- Supports 802.1p Quality of Service (QoS)
- Plug & play, no installation required & Fanless quiet operation
- External power adapter included
The Edimax ES-5104PH V2 is a five port Fast Ethernet switch with four PoE+
Ports designed for use in home, small or medium sized network environments. With
four DIP switches, PoE ports can be manually set with on/off control, extending
PoE delivery distance up to 200 meters and port-based on/off control for VLAN
and QoS is also supported. The switch easily connects and supplies power to
PoE-enabled devices such as wireless access points, network cameras and IP
phones as well as other Ethernet-enabled devices such as computers, printers or
network attached storage (NAS). The compact size and fan-less design make the
switch an ideal solution for expanding home and small business networks.
Power over Ethernet (PoE+) Auto Detection
Features four IEEE 802.3at Power over Ethernet (PoE+) ports which supply up
to 30 watts of electricity per port. It can convert standard 100240V AC power
into lowvoltage 50 - 57V DC electricity to power IEEE 802.3at compliant network
accessories via existing LAN cables. With PoE detection capability, the
ES-5104PH V2 is able to verify whether the connected device is IEEE 802.3at
compliant. In the event that a PoE device is not detected, only network data
will be transmitted through the LAN cable meaning easy setup and management of
network devices such as access points and network cameras.
CCTV Mode
The unique CCTV-mode DIP switch function is ideal for surveillance networking
environment. Switching all DIP switches to on enables CCTV mode which gives
multi-function PoE + data extension, Port Isolation and QoS on the ES-5104PH V2.
When using video surveillance systems for homes, business or institutions, the
CCTV mode provides better speeds for multicast viewing and easier installation.
Setting all DIP switches back to off quickly changes the ES-5104PH V2 back to
normal for general-use data transmission.
Power and Data Distance Extension
The built-in DIP switch provides extended operation modes on switch 1 &
2. The ES-5104PH V2 operates as a standard IEEE 802.at/af PoE Switch when DIP
switches are off. With switches on, the ES-5104PH V2 operates on a per-port
basis at 10Mbps duplex operation but can support 30-watt PoE power output over a
distance of up to 200 meters, overcoming the 100m limit on Ethernet UTP cables.
With this brand-new feature, the ES-5104PH V2 provides an additional solution
for 802.3at/af PoE distance extension and saves costs of Ethernet cable
installation.
Innovative Port-based VLAN Features
The ES-5104PH V2 features port-based VLAN where ports can be isolated from
each other via DIP switch port 3. This can help to prevent IP cameras multicast
or broadcast storms from affecting each other.
Hardware QoS for Video & Voice Traffic Priority
Supports 802.1p QoS via DIP switch port 4. This ensures first priority for
video and voice traffic.
One Uplink Port
The ES-5104PH V2 comes with one uplink port with 100Mbps transfer rate to
ensure high-speed data and video transmission, and reliable assurance for
connections between surveillance systems and the outside network where the four
PoE+ ports can be used to their full potential.
High Performance
The ES-5104PH switch also supports auto-negotiation and non-blocking wire
speed to give you the maximum speed and highest performance possible for each
device connected to your network.
Plug & Play, No Installation Required
Just plug Ethernet or PoE enabled devices into the switch. Data and power can
be transmitted through existing standard Cat-5e Ethernet cables with no
additional cables or configuration required.The ES-5104PH V2 reduces the
difficulty, time and cost of network setup.
Flexible Network Deployment & Energy Efficient
A fast and effective solution when power outlets are unavailable for your
network devices. The switch additionally supports IEEE 802.3az Energy Efficient
Ethernet which allows for less power consumption and reduced costs during
periods of low data activity.
Fan-Less Quiet & Compact Design
A fan-less design ensures quiet operation and enables an even more compact
design, keeping valuable desk space free in home or small office
environments.
APPLICATION DIAGRAM
HARDWARE INTERFACE
- Maximum performance, actual data rates, and coverage will vary depending
on network conditions and environmental factors.
- Actual viewing resolution and frame rate of network cameras depend on
connection speed.
- Product specifications and design are subject to change without
notice.
Specifications
Hardware |
|
Ports |
5 RJ-45 10/100Base-T
ports |
|
4 RJ-45 10/100Base-T
PoE+ ports |
Transmission
Method |
Store and
forward |
LED
Indicators |
Power: Green
LED |
|
LNK/ACT: Green LED
(Port 1 Port 5) |
|
PoE: Green LED (Port 1
Port 4) |
|
PoE Alert: Green LED
(PoE overload alarm) |
Fan |
Fanless |
DIP
Switch |
PoE Extend, VLAN,
QoS |
Power
Requirements |
AC-to-DC external power
adapter |
|
Input: 100-240V
AC |
|
Output: 55V DC/1.3A
(Total Power: 71.5W) |
Power
Consumption |
3W |
Dimensions (L x W x
H) |
121mm x 75mm x
26mm |
Weight |
240.5g |
|
|
Performance |
|
Switching
Capacity |
1G |
MAC
Address |
1K |
Buffer
Memory |
56Kb |
Filtering / Forwarding
Rates |
100Mbps port -
148,800pps |
|
10Mbps port -
14,880pps |
|
|
Power over
Ethernet |
|
Standard |
IEEE
802.3af |
|
IEEE
802.3at |
Power
Output |
Up to 30W per
port |
Pin
Assignment |
1/2(+),
3/6(-) |
PoE Power
Budget |
60W |
|
|
Environment |
|
Temperature |
Operating: 0 ~ 40
C |
|
Storage: -40 ~ 70
C |
Humidity
(Non-condensing) |
Operating: 10 ~
90% |
|
Storage: 5 ~
90% |
|
|
Standards
Compliance |
|
Standards |
IEEE 802.3 10BaseT
Ethernet |
|
IEEE 802.3u 100BaseTX
Fast Ethernet |
|
IEEE 802.3af Power over
Ethernet (PoE) |
|
IEEE 802.3at Power over
Ethernet Plus (PoE+) |
|
IEEE 802.3x Full-duplex
and flow control |
|
IEEE 802.3az Energy
efficient Ethernet |
Certifications |
FCC, CE,
LVD |