Please choose carefully, we are unable to refund or exchange for incorrect choice. ECC memory is generally system/server specific and we recommend the use of our Kingston memory selector to ensure compatibility
All stock codes associated to this product
KVR16LE11S8/4, 740617219654
Kingston KVR16LE11S8/4 4GB 1Rx8 512M x 72-Bit PC3L-12800
CL11 240-Pin ECC DIMM
Description
This document describes ValueRAM's 512M x 72-bit (4GB) DDR3L-1600 CL11 SDRAM
(Synchronous DRAM), 1Rx8, ECC, low voltage, memory module, based on nine 512M x
8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600
timing of 11-11-11 at 1.35V or 1.5V. This 240-pin DIMM uses gold contact
fingers. The electrical and mechanical specifications are as follows:
Features
- JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power
Supply
- VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
- 800MHz fCK for 1600Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting
address “000” only), 4 with tCCD = 4 which does not allow seamless read or
write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Thermal Sensor Grade B
- Internal(self) calibration : Internal self calibration through ZQ pin (RZQ
: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C <
TCASE < 95°C
- Asynchronous Reset
- PCB: Height 1.18” (30mm), single sided component
Specifications
CL(IDD)
|
11
cycles |
Row Cycle Time
(tRCmin) |
48.125ns
(min.) |
Refresh to
Active/Refresh Command Time (tRFCmin) |
260ns
(min.) |
Row Active Time
(tRASmin) |
35ns
(min.) |
Maximum Operating
Power |
(1.35V) = 1.822
W* (1.50V) = 2.025 W* |
UL Rating
|
94 V -
0 |
Operating
Temperature |
0Degree C to 85Degree
C |
Storage
Temperature |
-55Degree C to +100Degree
C |