All stock codes associated to this product
GS5008PL, GS-5008PL, ED20086, 4717964701077
Overview
Features
- IEEE 802.3af/at PoE compliant.
- Eight Gigabit Ethernet ports.
- Up to 30W per port (total power budget: 150W) for powering PoE-enabled
devices.
- Auto-detection of powered devices (PD) and power consumption levels.
- Auto fault-detection on over/under current & voltage.
- Access Control List (ACL) support.
- Switch capacity:16Gbps & Forwarding rate:11.9Mpps.
- IEEE 802.1Q-based VLAN for network segmentation to improve performance and
security.
- IEEE 802.1p QoS with 4 priority queues
- IGMP Snooping V1 / V2 / V3 support.
- 4K MAC address table and jumbo frame support up to 9KB.
- 19-inch 1U rack-mount brackets included.
Overview
The Edimax Pro GS-5008PL is a web-smart switch with 8 Gigabit PoE+ ports.
Designed for medium to small network environments, its standard 19-inch 1U
rack-mount brackets allow for integration with the most widely used mounting
systems on the market. The Edimax GS-5008PL is a superb choice to boost your
network environments performance and efficiency.
IEEE 802.3at/af Power over Ethernet Standard
The GS-5008PL features 8 IEEE 802.3at Power over Ethernet (PoE+) ports which
supply up to 30W of electricity per port, and has a total power supply of 150 W
to power any 802.3at or 802.3af compliant power device. With PoE detection
capability, the GS-5008PL is able to verify whether the connected device is IEEE
802.3at or 802.3af compliant. In the event that a PoE device is not detected,
only network data will be transmitted through the LAN cable. The GS-5008PL can
be used with different PoE products such as access points, network cameras or
VoIP devices and is an effective solution for network environments where power
outlets are difficult to access.
PoE for Easy Installation and Better Cost Efficiency
Power over Ethernet technology enables the Ethernet cable to carry both data
and power, reducing cable installation and eliminating the need for extension
cords or electrical outlets on the walls and ceiling. Overall the GS-5008PL can
lower installation costs and simplify the deployment effort.
Power-Budget User Interface for PoE Device Management
The GS-5008PL features an innovative power-budget UI (user interface) which
allows IT managers to monitor the power consumption of each PoE port and the
total power consumption of connected PoE devices. Monitor the entire PoE network
and assess the total power usage before adding new PoE devices to the network
architecture. The power-budget UI also features a remote on/off function for
each PoE port, so manual plug/unplug isnt necessary when a PoE device hangs.
Simply use the remote power button to quickly reset the device.
Smart Tools for Improved Network Efficiency
The GS-5008PL features smart network monitoring tools that allow for improved
network efficiency. Security and management features include bandwidth control
and VLAN (IEEE 802.1Q VLAN tagging and port-based VLAN). Using its web-based
interface, administrators can set up VLANs to segregate traffic and configure
link aggregation settings to create fat traffic pipelines. Additionally, these
features offer extra protection on the network edge and the password-protected
configuration interface can be accessed remotely.
Diagram
Specifications
|
HARDWARE |
|
|
Ports |
8 Port RJ-45 10/100/1000Base-T PoE+ ports |
|
Transmission Method |
Store and forward |
|
Buttons |
Reset button |
|
LED Indicators |
|
|
Per Port |
Link/Act |
|
PoE |
Act/Status |
|
Per Unit |
Power |
|
Power Input |
100-240V AC, 50-60 Hz, internal power supply |
|
Total Power Budget |
150W |
|
Dimensions (L x W x H) |
265 x 184 x 44 mm |
|
Weight |
1.62kg |
|
|
|
PERFORMANCE |
|
|
Switching Capacity |
16Gbps |
|
Forwarding Rate |
11.9Mpps |
|
MAC Address |
4K |
|
Buffer Memory |
192KB |
|
Jumbo Frames |
9.6KB |
|
Filtering/Forwarding Rates |
1000Mbps port 1,488,000pps |
|
100Mbps port - 148,800pps |
|
10Mbps port - 14,880pps |
|
|
|
POWER OVER ETHERNET |
|
|
Standard |
IEEE 802.3af, IEEE 802.3at |
|
Power Output |
Up to 30W per port |
|
Pin Assignment |
1/2(+), 3/6(-) End-Span (mode A) |
|
Available Power Budget |
130W, (Port 1 to 4 = 65W & Port 5 to 8 = 65W) |
|
Management |
PoE ouput on/off management |
|
|
|
SMART FEATURES |
|
|
VLAN |
Up to 8 VLANs and 4096 VLAN IDs |
|
802.1Q tag-based VLAN |
|
Port-based VLAN |
|
Port Trunking |
IEEE 802.3ad LACP Trunk-Static trunk up to 1 trunk
groups |
|
IGMP Snooping |
IGMP v1/v2/v3 snooping |
|
Block unknown multicast traffic |
|
Multicast groups: 20 |
|
QoS |
Port-based QoS, IEEE802.1p QoS, 4 Priority Queues, scheduling
algorithm |
|
Management |
|
|
User Interface |
Web-based management |
|
User Account |
Login account configuration |
|
Firmware Upgrade |
Firmware upgrade by WEB |
|
Syslog |
Support event log, alarm log and security log |
|
Security |
Broadcast Storm control |
|
|
|
ENVIRONMENT |
|
|
Temperature |
Operating: 0 ~ 50 DegreeC |
|
Storage: -40 ~ 70 DegreeC |
|
Humidity (Non-condensing) |
Operating: 10 ~ 90% |
|
Storage: 10 ~ 90% |
|
|
|
STANDARDS COMPLIANCE |
|
|
Standards |
IEEE 802.3 10BaseT Ethernet |
|
IEEE 802.3u 100BaseTX Fast Ethernet |
|
IEEE 802.3ab 1000BaseT Gigabit Ethernet |
|
IEEE 802.3af Power over Ethernet (PoE) |
|
IEEE 802.3at Power over Ethernet Plus (PoE+) |
|
IEEE 802.3x Full-duplex and flow control |
|
IEEE 802.1Q VLAN |
|
IEEE 802.3ad Link Aggregation Control Protocol
(LACP) |
|
IEEE 802.3az Energy Efficient Ethernet |
|
IEEE 802.3p Quality of Service (QoS) |
|
Certifications |
FCC Class A, CE |
Networking
