All stock codes associated to this product
KVR24S17S8/4, MEKVR24S17S84, MEKVR24S17S8-4, 740617263510, 740617273953
Kingston KVR24S17S8/4 4GB 1Rx8 512M x 64-Bit PC4-2400
CL17 260-Pin SODIMM
Description
This document describes ValueRAM's 512M x 64-bit (4GB) DDR4-2400 CL17 SDRAM
(Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 512M x 8-bit
FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400
timing of 17-17-17 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The
electrical and mechanical specifications are as follows:
Features
- Power Supply: VDD=1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD=2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask
signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode
register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.18” (30.00mm)
- RoHS Compliant and Halogen-Free
Specifications
CL(IDD) |
17
cycles |
Row Cycle Time
(tRCmin) |
45.75ns(min.) |
Refresh to
Active/Refresh Command Time (tRFCmin) |
260ns(min.) |
Row Active Time
(tRASmin) |
32ns(min.) |
Maximum Operating
Power |
TBD
W* |
UL
Rating |
94 V -
0 |
Operating
Temperature |
0° C to +85°
C |
Storage
Temperature |
-55° C to +100°
C |